Single unit
- Two options to best suit your workflow: push-button or foot switch
- Requires only 5 minutes per day for start-up, maintenance, and shut-down procedures
- Easily cleaned with ethanol or a non-corrosive decontaminant fluid
-
The Cryo Bio System™ (CBS) SYMS I Sealer is a tabletop device specifically designed to seal CBS High Security straws. Crafted with ionomeric resin, this sealer is highly reliable and durable, requiring minimal maintenance and ensuring optimal operation in the long run. The SYMS I can effectively seal 0.3 ml and 0.5 ml CBS High Security straws, as well as CBS High Security Vitrification straws. These straws are integral components of the CBS closed cryopreservation system, and the SYMS I Sealer ensures a secure seal, contributing to the system's overall safety and effectiveness. The sealer provides users with flexibility in operation, as it can be activated by either a push-button or a foot switch, depending on the user's preference. This user-friendly functionality makes the SYMS I Sealer a valuable asset in laboratories and facilities that use the CBS cryopreservation system. -
The Cryo Bio System™ (CBS) SYMS III Sealer is a bench top unit designed to thermally seal all CBS™ High Security products, including CBS™ High Security 0.3 ml, 0.5 ml and 2 ml straws, CBS™ High Security Tubes, and CBS™ High Security Vitrification straws. Using an automatic detection system, the unit uses pre-set specific combinations of seal temperatures, time and jaw positions for each CBS device. Due to its compact size, the SYMS III can be used in a variety of locations, including on the lab bench, under laminar flow, or even in field operations.Single unit
- Multilingual interface (French, English, Spanish and Chinese) + 4 optional languages
- Laboratory glove-compatible colour touch screen
- Machine cycle display: pre-heating, ready status and sealing in progress
- Two sealing modes: automatic detection or operator-controlled via the touch screen
- Fault signal with messages and alarms
- Display and tracking of maintenance modes
- Easy to clean and service
-
CBS™ Weighted ID Rods are designed for use with CBS™ 0.3 ml High Security Sperm Straws. Thee rods provide internal colour-coding for easy sample identification, and are weighted to prevent filled straws from floating when immersed in liquid nitrogen.10 rods / pkg
-
CELL-VU® Pre-stained Morphology slides provide clean and clear slides for rapid cellular visualization and differential cell assessment. Each slide contains a dried layer of stain that facilitates morphology assessment when in contact with cells. Samples are applied directly to the slide and a coverslip placed over the sample, reducing exposure to harmful external variables. CELL-VU® slides combine conventional microscope slides with a proprietary combination of methylene blue and cresyl violet stains into a single, ready-to-use device.75 slides/box
- Used for the staining spermatozoa, blood, CSF, and urine for cytology
- Disposable, reducing clinician’s unnecessary exposure to bodily fluids
- One step process limits exposure to reagents and potentially harmful stains
- Highly accurate results
- Increases lab effectiveness by eliminating the need for cleaning
- Used for World Health Organization and Kruger strict morphology sperm assessment from undiluted semen
-
CellVision® slides are manufactured from cleaned coated non-toxic glass. Each disposable slide comes with or without an etched grid, has 2 or 4 separate counting chambers, as well as a fixed coverslip with 100 microns’ depth. The combination of specific chamber-depths and several built-in grid formats facilitate sperm motility assessments and contribute to accurate and reproducible semen analysis. Suitable for a variety of different human and veterinary applications, CellVision® slides eliminate time-consuming cleaning procedures and reduce the risk of exposure to infectious material.25 slides / box
- Disposable
- Made from cleaned and coated non-toxic glass
- Available in 2 and 4 chambers formats with 10 to 100 μm fixed-depth coverslips
- Colour-coded by format
- Slides come with an identical image, dimensions and fitted counting grid as a re-usable hematocytometer
- For use in human and veterinary semen analysis
-
CellVision® slides are manufactured from cleaned coated non-toxic glass. Each disposable slide comes with or without an etched grid, has 2 or 4 separate counting chambers, as well as a fixed coverslip with 10, 12, 20 or 100 microns’ depth. The combination of specific chamber-depths and several built-in grid formats facilitate sperm motility assessments and contribute to accurate and reproducible semen analysis. Suitable for a variety of different human and veterinary applications, CellVision® slides eliminate time-consuming cleaning procedures and reduce the risk of exposure to infectious material.25 slides / box
- Disposable
- Made from cleaned and coated non-toxic glass
- Colour-coded by format
- Slides come with an identical image, dimensions and fitted counting grid as a re-usable hematocytometer
- For use in human and veterinary semen analysis
-
CellVision® slides are manufactured from cleaned coated non-toxic glass. Each disposable slide comes with or without an etched grid, has 2 or 4 separate counting chambers, as well as a fixed coverslip with 20 microns’ depth. The combination of specific chamber-depths and several built-in grid formats facilitate sperm motility assessments and contribute to accurate and reproducible semen analysis. Suitable for a variety of different human and veterinary applications, CellVision® slides eliminate time-consuming cleaning procedures and reduce the risk of exposure to infectious material.25 slides / box
- Disposable
- Made from cleaned and coated non-toxic glass
- Colour-coded by format
- Slides come with an identical image, dimensions and fitted counting grid as a re-usable hematocytometer
- For use in human and veterinary semen analysis
-
The Makler Sperm Counting Chamber is designed for accurate sperm count analysis directly from an undiluted semen specimen, commonly used during IVF and andrology procedures. This chamber is distinguished by its 10-micron depth, which prevents blurring and allows sperm to move freely at a single focal plane for observation. A replacement coverslip grid is available in case the original that comes with the unit is damaged. The chamber requires a 20X objective or 20X eyepieces for proper usage.- A built-in grid on the cover glass, enhancing ease of use by eliminating the need for inserting and removing grids in the microscope eyepiece.
- Reusability, with easy cleaning using a non-bleach disinfectant solution.
- Self-controlled accuracy test visible through color fringes at the four contact points, ensuring the cover glass remains unaffected by the applied sample.
- Dependable repeated use without the need for recalibration.
- Precision manufactured and individually checked with a laser beam to ensure accuracy.
-
The ColdStash VitroStash 47L Dewar is an innovative storage solution developed to optimize capacity in laboratory settings. The VitroStash is equipped with twelve stacked canisters, which effectively doubles the storage capacity when compared to traditional canister systems. Created specifically for IVF clinics, the VitroStash system accommodates up to 384 patients without necessitating any operational changes in the lab. The VitroStash system not only aids in addressing storage limitations but also reduces costs by eliminating the need for additional Dewars, alarms, monitors, and by lowering LN2 consumption. Thus, it serves as an economical and user-friendly solution for labs.Single unit
- A dewar retrofit with VitroStash will cost about half of a new dewar.
- VitroStash increases current storage capacities by 2X.
- No need to change current lab configurations.
- Enhanced grid configuration allows for simple, ergonomic storage.
- Fewer dewars further reduces energy and LN2 costs.
-
The VitroStash Max Dewar is a 95-liter high-capacity storage solution for laboratories, delivering a significant increase in storage capability while maintaining operational efficiency. This model comes equipped with twelve VitroStash stacked canisters, canes, and goblets, all designed for maximized storage density. The VitroStash Max Dewar stands out for its economic benefits, notably reducing per patient storage and operating costs compared to large LN2 freezers. It is engineered for lower liquid nitrogen and energy usage, contributing to sustainable operation. Enhancing lab safety, it minimizes alarm occurrences, thus reducing potential risks and demands on staff. With its ample storage capacity, compact footprint, and cost-saving features, the VitroStash Max Dewar offers an effective storage solution for labs.Single unit
- Made of high-strength aluminum alloy
- Advanced powder coat finish for increased durability
- A locked-lid switch for safety of preserved sample is optional
- Service life is five years
- Temperature and Liquid Level monitor available
-
Fertitech Canada's consultation services leverage our substantial expertise in the ART and IVF fields to provide your clinic with crucial insights. We can guide you through any stage of laboratory development, from new lab design and procurement for a new clinic to the integration of advanced technologies in an existing facility. We can address both immediate and long-term needs to support sustainable lab management. Our goal is to assist you in making informed decisions for your clinic's development and growth, leveraging our experience and industry knowledge. -
The ESCO Medical CultureCoin® is a single-use, gamma-sterilized IVF culture dish, designed for use with the MIRI® TL, ESCO Medical's time-lapse incubator. The MIRI® TL's state-of-the-art technology captures real-time images of developing embryos, providing a continuous view in the form of time-lapse videos. The CultureCoin® facilitates the MIRI® TL’s capture of images, as each of the 14 wells on the coin has a 300µm optically clear area for optimal microscopy. The CultureCoin® features an ergonomic layout, which ensures the secure and effective handling of embryos, and oxygen plasma-treated surfaces, which are designed to prevent bubble formation. Each culture well also includes two wash wells for cell manipulation, washing, or replacing culture media, and a pH reservoir to allow spot pH measurement without interaction with any cultured samples.25 dishes/box
- 14 numbered wells for easy location and tracking by the user. Each well also includes two washing wells for cell manipulations and media changes.
- Mounted lid ensures complete coverage of the culture area for added security.
- A specially designed area for pH measurement that doesn't disturb the cultured samples.
- Flat bottom design is ideal for facilitating heat transfer from below, enhancing the culture environment.
- Gamma-sterilized
-
Dewin’s BXGuard Pipettes are specialized biopsy pipettes featuring a narrowed inner diameter, designed for extracting biopsiable cells from embryos. They boast a unique "isthmus" within the functional section's inner cavity, which enhances the safety and efficacy of biopsies by potentially reducing or eliminating the need for lasers. This design simplifies the biopsy process, shortens the learning curve for practitioners, and helps to prevent the loss of cells.10 pipettes / box
- Narrowed "isthmus" design for precise cell biopsy from embryos.
- Aims to reduce or eliminate laser use, increasing the safety and simplicity of biopsies.
- Contributes to a shorter learning curve and minimizes the risk of cell loss.
-
Dewin's Flickmate Pipettes are flat-opening holding pipettes designed for the immobilization of embryos during embryo biopsy, featuring a unique sloping surface at the upper part that intersects with the oocyte-holding surface to facilitate efficient immobilization. This design aims to increase the success rate of single biopsies by reducing the necessity for laser cutting, thereby minimizing the risk of chimera formation.10 pipettes / box
- Sloping surface design for efficient embryo immobilization during biopsy procedures.
- Eliminates the need for laser cutting, reducing chimera formation risk.
-
Embryotech Laboratories provide cryopreserved mouse embryos and hamster ova, with a simple one-step thawing process. These high-quality embryos and ova can be used for a wide variety of projects and applications such as research models, measuring quality control testing (Mouse Embryo Assay), embryo manipulation training and more. All embryos are shipped using a dry liquid nitrogen vapor shipper, and include a Thaw Alert™ straw to monitor temperature during transport. Due to the coordination and timing involved in shipping Embryotech products, they are available by special order only. For more information, or to place an order, please contact us directly.10 or 20 per straw
- Multiple mouse gametes available: Embryos at stages 1-Cell, 2-Cell, 4-Cell, 8-Cell or Blastocyst, and single sperm straws
- Hamster ova available in straws of 10
- All shipments include a Thaw Alert™ Straw to monitor shipper temperature, ensuring the quality of each and every order
- Produced in an ISO-17025 accredited test laboratory, with Good Laboratory Practice for Nonclinical Laboratory Studies accreditation
- Product thawing and dry shipper instructions included
-
Fertitech Canada provides installation services for ART equipment. Our team's extensive experience allows us to effectively handle installations in both new and established clinics. Our services are tailored to each clinic's unique needs. We recognize the delicate nature of ART equipment and ensure timely and careful transport and delivery for installation. With a track record of successfully installing equipment from various leading suppliers in a variety of clinics and labs across Canada, Fertitech Canada is well-positioned to meet your installation needs. -
The ESCO Airstream Class II Type A2 Biosafety Cabinet is a critical piece of equipment designed primarily for applications necessitating a sterile work zone, including those that require the handling of pathogenic biological samples. It offers comprehensive protection to the operator, the laboratory environment, and the product or process within the work zone against particulates and airborne contamination. This Biosafety Cabinet is engineered with an inflow system that safeguards the operator from potentially harmful substances. To ensure maximum protection of the samples and operator, it employs ULPA/HEPA-filtered downflow, creating a negative pressure ISO Class 3 work zone that effectively prevents cross-contamination. This both prevents airborne contaminants from escaping the work zone and protects the operator from exposure to potentially hazardous materials. Built for practicality, the ESCO Airstream Class II Type A2 Biosafety Cabinet features a single-piece work tray and single-piece wall design, facilitating ease of cleaning and maintenance while enhancing overall durability. The ESCO Airstream Class II Type A2 Biosafety Cabinet is controlled by the Sentinel™ Gold Microprocessor controller, ensuring precise operational control and monitoring. It is also equipped with a DC ECM motor, allowing for energy savings of up to 70% and contributing to the cabinet's efficiency, environmental friendliness, and quiet operation.Single unit
- Certified in compliance with NSF 49 and EN 12469 standards
- Equipped with a DC-ECM blower that facilitates up to 70% energy savings compared to AC motors.
- Available in a range of sizes to accommodate various laboratory space availabilities.
- Maintains a stable and self-compensating airflow, reliably countering building voltage fluctuations and filter loading.
- Features a UV lamp for decontamination to maintain sterility within the work zone.
- Coated with Isocide™ powder to actively inhibit microbial growth, thereby promoting a safer working environment.
-
The ESCO Airstream Laminar Flow Air Flow Cabinet is an excellent choice for clinics and labs which require a sterile workspace with a constant filtered airflow. These benches provide a sterile environment ideal for medical and laboratory applications, as purified air travels across the working zone of the cabinet in a vertical, unidirectional stream. Airstream benches offer a high level of protection for both samples and users, ensuring the aseptic and particle-free conditions that are necessary for safe work with samples in open dishes. This vertical laminar flow workstation provides sample protection with ULPA filtration, which is 10x as efficient as HEPA filtration and creates an ISO Class 3 work zone. The laminar flow bench is highly efficient, incorporating the latest generation of DC ECM motors, and is able to maintain a stable airflow despite voltage fluctuations. This stable airflow eliminates turbulence and the possibility of dead corners in the work zone. In addition to its filtration capabilities, the ESCO Airstream Laminar Flow Bench also offers a comfortable low noise level of 52dBA* (LVG-4A in open field condition). The ESCO Airstream Laminar Flow Air Flow Cabinet has been tested for cross-contamination and product protection using a microbiological test method adopted from EN12469. The laminar flow bench also features an ISOCIDE™ Powder Coat (silver-impregnated), which inhibits microbial growth, improving safety. Each clean bench is individually factory tested for safety and performance in accordance with international standards.Single unit
- AISOCIDETM powder coat (silver-impregnated) inhibits microbial growth to improve safety
- Low-noise with energy-efficient ECM blowers
- ULPA (ultra low particulate air) filtration is 10x more efficient than HEPA filtration and creates an ISO class 3 work zone
- ULPA Main Filter (99.9995% efficiency for the removal of 0.12 µm diameter or larger PM)
- Improved safety with airflow sensors that monitor airflow in real-time and alerts users of insufficient airflow
-
The ESCO Airstream® NS G4 Class II Type A2 Biological Safety Cabinet is an NSF-certified unit equipped with the Centurion Touchscreen controller. Designed for laboratory use, the cabinet features dimmable LED illumination and a raised, stainless-steel armrest for user comfort. Two model variants are available: the S-Series has stainless steel side walls with side capture zones and a single-piece work tray that is designed to retain spills, while the E-Series comes with tempered glass side walls and a multi-piece, autoclavable work tray. Each variant is available in three-, four-, five-, and six-foot configurations. Both models provide filtration efficiency that is 10 times higher than standard HEPA filters, establishing an ISO Class 3 work zone instead of the more common ISO Class 5. Despite this increased efficiency, the filter has a lifespan of 10 years, with replacement costs equivalent to HEPA filters. The cabinet's design prioritizes safety, while also considering space constraints in laboratory settings. The Centurion Touchscreen Controller adds a layer of operational clarity for users.Single unit
- Centurion Touchscreen Controller: Provides a clear 3D BSC diagram displaying safety information and cabinet alarms, includes details on alarm types and intervention instructions, angled for ease of viewing, and offers a Quickstart mode for rapid operation.
- Lighting: Features dimmable LED lights with adjustable work zone brightness, producing a light intensity of 1200 lux, contributing to energy efficiency.
- Ergonomic Design: Comes with an 8” sash opening, and the frame is constructed of shatterproof, UV-absorbing tempered glass. It also includes support beams to reduce vibration and a holder for easier drain pan cleaning.
- Connectivity: Equipped with a USB port for data log access and BMS connectivity. Also integrates a Remote Modbus feature for remote secure access from external devices.
- Cabinet Variants: S-Series: Features stainless steel side walls with negative pressure for containment and a single-piece spill-retaining work tray, or E-Series: Designed with tempered glass side walls for increased visibility and a multi-piece, autoclavable work tray.
- Energy Efficiency: Incorporates an energy-efficient DC ECM for up to 70% energy savings compared to AC motors. The cabinet has a standby mode and an overall low energy consumption.
- ULPA Filter: Offers filtration efficiency ten times greater than HEPA filters, creating an ISO Class 3 work zone. This filter maintains a lifespan of 10 years with comparable replacement costs to HEPA filters.
- Isocide™ Coating: An antimicrobial powder coating on the cabinet surfaces that can eliminate 99.9% of surface bacteria within a 24-hour period.
-
The CelCulture® CO₂ Incubator is equipped with a range of advanced features, including rapid temperature and gas recovery, ISO Class 5 cleanliness, an ISOCIDE™ antimicrobial coating, and an inner door kit that reduces the risk of contamination. Designed to create an environment that mimics the natural conditions required for the development of embryos, the incubator is able to maintain low levels of oxygen. This is achieved through the use of sophisticated firmware and precision sensors that monitor and regulate the temperature, CO2, and O2 levels within the chamber. The inner door kit further enhances the incubator's performance by facilitating fast parameter recovery and reducing the risk of contamination, with each section of the incubator featuring a dedicated door panel. Available in CO2+O2 control, or CO2-only control.Single unit
- Advanced IR CO2 Sensor
- Advanced, new-generation Zirconia O2 Sensor
- Integrated gas mixer; CO2 and O2 Control
- Extremely reliable and easy-to-use
- Fast Temperature and Gas Recover
- Optional integrated SafeSENS pH System
-
ESCO’s Multi-Zone ART Workstations feature a vertical laminar flow and are equipped with multiple heating zones which provide temperature control throughout the work surface. The ten distinct zones, each with its own heating elements and sensors, automatically prioritize power distribution and provide the user with precise temperature regulation and rapid recovery. Four different temperature modes allow activating and deactivating different zones, simplifying vitrification cooling and warming procedures. These workstations are available in a variety of sizes and configurations to meet different requirements, with options including built-in microscopes and integrated MIRI® chambers. These workstations provide digital control of premixed gas, allowing for precise sample environmental control. An ULPA filtration system ensures clean airflow, filtering particles 10 times smaller than those caught by HEPA filters. The workstation's humidification system and positive pressure work environment ensure that your samples remain safe and uncontaminated. These workstations come equipped with a fully functional integrated touchscreen Windows PC interface that displays real-time information on all work area parameters, including zone temperature performance, gas pressure, and flow rate. The touchscreen interface is easy to use and allows for seamless temperature monitoring and control. With the variety of size and option configurations available, there is sure to be an ESCO IVF Heated Multi-Zone Workstations that fits your needs for safety, reliability, and accuracy.Single unit
- Available in 4 or 6 foot configurations
- Multi-Zone temperature control with Vitrification Mode
- Integrated, fully functional Windows touchscreen PCs
- ULPA Main Filter (99.9995% efficiency for the removal of 0.12 µm diameter or larger PM)
- Integrated humidification system using pre-mixed gas
- Optional tabletop built-in gassed and heated MIRI Chambers
- Quietest hood on the market
-
The Mini MIRI® Dry incubator is a compact and affordable solution for IVF laboratories that prioritize space and cost-effectiveness. With its two-chamber design, it is modeled after the classic MIRI® Multiroom incubator. This dry IVF bench top incubator is unique in that it can recirculate gas within the incubator, and is compatible with a HEPA/VOC filtration system, which is not typical of other humidified IVF incubators. The gas, whether pure N2 and CO2 or premixed, first flows through the tri-gas mixing chamber, where the user sets the desired CO2 and O2 gas concentrations. The gas then passes through the HEPA/VOC filter before entering the incubator chambers. Afterward, the gas undergoes sterilization using UV light (254nm) before returning to the tri-gas mixing chamber and recirculating within the system. This design ensures minimal gas consumption even with lid openings and maintains the recirculating air's cleanliness and safety for the embryo samples.Single unit
- 2 individually-controlled chambers
- Integrated gas mixer; CO2 and O2 Control
- External Validation Ports for Gas and Temperature
- Datalogging Software Included
- Optional integrated SafeSENS pH System
-
The Mini MIRI® Humidity Incubator is a compact and reliable humidified mini bench top incubator that is based on the robust MIRI® design. Its direct heat regulation and compact design prevent vapor condensation and contribute to faster temperature and gas recovery. This humidified incubator uses either premixed gases or pure gas (N2 and CO2) inserts that pass through a tri-gas mixing chamber, ensuring precise gas concentrations before entering the incubator chambers. The gas then recirculates and goes through the gas mixing chamber again, minimizing gas consumption.Single unit
- 2 individually-controlled chambers
- Integrated gas mixer; CO2 and O2 Control
- External Validation Ports for Gas and Temperature
- Datalogging Software Included
- Optional integrated SafeSENS pH System
-
The Esco MIRI® II-12 Multiroom Incubator is a top-of-the-line solution for IVF laboratories, able to meet exacting standards of performance and validation. The incubator features 12 chambers and 24 independent PID temperature controllers to ensure minimum environmental stress for embryos. Each compartment is separate and does not affect the temperature of other chambers. The lid temperature and the temperature in the culture chambers can be regulated and controlled separately, with PET layers separating the top and bottom of each compartment. And because it includes a separate PT-1000 sensor for each compartment, the MIRI® II-12 incubator can accurately monitor and control the temperature of each chamber individually, ensuring optimal conditions for embryo development. The circuitry for the PT-1000 sensors is separated from the unit's electronics, so it remains a genuinely independent validation system. The MIRI® II-12 incubator uses pure CO2 and N2 gases, allowing for precise control of CO2 and O2 concentrations in each chamber. The incubator features a recirculated gas system that ensures quick and complete gas replacement in less than five minutes, with gas cleaned by a 254 nm UVC light with filters to prevent dangerous ozone production. The incubator also has a complete gas control system, including pressure regulators, gas flow sensors, gas pressure sensors, and gas filters. The incubator's software runs on a built-in touchscreen and includes logging functions for long-term data storage, as well as a USB module for off-site evaluation of quality control data. The incubator also includes a pH sensor port, allowing users to measure the pH of samples at any time.Single unit
- 12 individually-controlled chambers
- real-time datalogging touchscreen
- Integrated gas mixer; CO2 and O2 Control
- Extremely reliable and easy-to-use
- Optional integrated SafeSENS pH System
-
The Esco MIRI® Multiroom incubator is an excellent choice for safeguarding embryos in your IVF laboratory. Its six (6) separate chambers not only provide embryologists with a larger capacity to accommodate more embryos but also ensure that environmental conditions are maintained even when adjacent chambers are accessed. The incubator offers the best temperature recovery, accuracy, and uniformity in the IVF market, thanks to its heated lid design. This design guarantees that the temperature provided to your embryos is not solely sourced from the dish's bottom but also delivered from the top, maintaining a set point of 37.2C to ensure a consistent temperature of 37.0C for your samples. The Esco MIRI® Multiroom incubator provides the choice to use pure N2 and CO2 gases, which are more affordable than premixed gases. It recirculates these gas inserts, giving you the best value for your money. This feature also offers you the flexibility to adjust your gas concentration as needed to optimize embryo culture protocols in your laboratory. Additionally, the MIRI® Multiroom is compatible with the most commonly used brands of culture dishes in the market.UNIT
- 6 individually-controlled chambers
- Integrated gas mixer; CO2 and O2 Control
- Extremely reliable and easy-to-use
- Best-priced incubator on the market
- Optional integrated SafeSENS pH System
- Optional Stacking Frame for 2 units
-
The Esco MIRI® Humidified Multiroom incubator is an excellent choice for safeguarding embryos in your IVF laboratory. Its six (6) separate chambers not only provide embryologists with a larger capacity to accommodate more embryos but also ensure that environmental conditions are maintained even when adjacent chambers are accessed. The incubator offers the best temperature recovery, accuracy, and uniformity in the IVF market, thanks to its heated lid design. This design guarantees that the temperature provided to your embryos is not solely sourced from the dish's bottom but also delivered from the top, maintaining a set point of 37.2C to ensure a consistent temperature of 37.0C for your samples. The humidified MIRI includes a built-in humidity sensor for accurate and continuous readings, with a water bottle located on the side of the unit for refilling and easy control of water level. The Esco MIRI® Humidified Multiroom incubator provides the choice to use pure N2 and CO2 gases, which are more affordable than premixed gases. It recirculates these gas inserts, giving you the best value for your money. This feature also offers you the flexibility to adjust your gas concentration as needed to optimize embryo culture protocols in your laboratory. Additionally, the MIRI® Multiroom is compatible with the most commonly used brands of culture dishes in the market.Single unit
- Humidity Bottle allows circulating gas to be humidified
- 6 individually-controlled chambers
- Integrated gas mixer; CO2 and O2 Control
- Extremely reliable and easy-to-use
- Best-priced incubator on the market
- Optional integrated SafeSENS pH System
- Optional Stacking Frame for 2 units
-
The MIRI GA® is a tabletop device specifically designed for external validation of gas concentration and temperature in IVF incubators. This versatile device can validate various types of Esco Medical IVF incubators, including the MIRI® Time-lapse Incubator, MIRI® Multiroom Incubator, Mini MIRI® Incubators, and other brands. Unlike conventional handheld validating devices that require separate devices for temperature and gas concentration measurements, the MIRI® GA can perform both measurements concurrently. Moreover, the device can measure gas and temperature continuously 24/7, whereas conventional devices perform measurements at regular intervals. With its gentle and adjustable gas suction rate of 3L/h, the MIRI® GA consumes less gas than conventional devices, which can use up to 12L/h. The device also features data logging software, including an adjustable alarm threshold, which is not available in conventional devices. Additionally, the MIRI® GA can monitor up to six incubation chambers simultaneously, while conventional devices can only validate one unit at a time.Single unit
- 6-Channel gas and temperature validation
- Continuous 24h/7 days monitoring
- Gas Feedback Loop into incubator
- Datalogging Software
-
Available with 6 or 12 chambers, the MIRI® Time-Lapse Incubator is a multiroom incubator that comes equipped with a microscope and camera. The integrated camera and microscope offer real-time, high-quality time-lapse images of embryo development, eliminating the need for manual microscopy and the potential risks associated with removing embryos from the safe environment of the incubation chamber. With time-lapse embryo monitoring, detailed morphokinetic data throughout the entire developmental process can be gathered, providing insights not available through traditional spot microscopic evaluation. This allows for the observation of all critical events, aiding in the identification of healthy embryos with the highest potential for implantation, and ultimately resulting in higher pregnancy rates. The process of embryo annotation has been simplified with an innovative annotation system, which revolves around “events” located on the left side of the interface. The pre-programmed events list includes t2, t3, t4, t5, t6, t7, t8, morula, blastocyst, and early blastocyst, but the software allows for complete customization of each event. Users can modify the pre-programmed events list by adding other criteria using the advanced parameters in the unit’s Settings menu. To make the process even more user-friendly, an Ideal Time function has been added, represented by a colored circular band on the edge of annotated events. This feature indicates the ideal timings for each event, making it easier to compare the actual timing of embryo development with the ideal timing. In addition to the integrated timelapse and annotation functionality, these incubators feature all of the advantages standard to the MIRI product line, including distinct chambers which ensure the maintenance of environmental conditions, a heated lid to enhance temperature regulation and recovery, an onboard gas mixer, and an optional integrated SafeSENS pH system.UNIT
- Available in 6 or 12 Chambers
- 6 individually-controlled chambers
- Integrated gas mixer; CO2 and O2 Control
- Extremely reliable and easy-to-use
- Best-priced timelapse incubator on the market
- Optional integrated SafeSENS pH System
- Available with Fairtility CHLOE AI System
-
The ExSeed CASA Lite system is designed to aid embryologists and technicians in performing quantitative semen analysis, providing metrics such as concentration, motility, and morphology. The system boasts a plug-n-play web-based interface, high-resolution video with a large field of view, and real-time imaging through its brightfield microscopy. Portable in nature, it has a small lab footprint, integrates seamlessly with clinic software, and offers customizable reports. The system is known for its straightforward user interface, requires minimal training, and provides results in under a minute. Data security is prioritized, with anonymized patient data, full encryption, multi-factor authentication, and daily data backups. The storage is on ISO 27001 certified servers, and ExSeed holds the ISO 13485:2016 certification for quality management in medical devices.Single unit
- Intuitive UI with minimal training required
- Integrates with clinic software
- Customizable reports available
- Web-based software for remote access
- Portable device with minimal lab footprint
- Measures concentration, motility, morphology and more
- Significantly less expensive than other systems
-
The ExSeed Home Sperm Test Kit offers a convenient, fast, and accurate way to test male fertility parameters right from home. This CE-certified kit provides over 95% accuracy compared to lab tests, offering insights on sperm volume, concentration, and motility according to WHO standards. The process is straightforward and results are ready within 15 minutes. With a personalized lifestyle intervention program available through the app, users can get tips for improving sperm health based on their individual results. Every test is manually reviewed by fertility experts for accuracy and to provide personalized guidance. The ExSeed test primarily measures the Total Motile Sperm Count, which includes volume, concentration, and motility of the sperm, parameters that have been closely associated with the chance of pregnancy. The company recommends users to test their semen quality twice, with more than a week between tests, to account for natural variations in sperm quality. A kit with a larger number of tests is also available to track change in semen quality over time. With the ExSeed kit, tracking male fertility becomes as easy as using a pregnancy test. ExSeed test kits and refill kits are available for direct order through their online store and will be fulfilled by Fertitech.Multipack – Kit with 2 or 5 tests
- High accuracy: Over 95% accuracy compared to lab tests, providing reliable results from home.
- Fast results: Test results available within 15 minutes, with no need to send anything to a lab.
- Comprehensive measurements: Assesses sperm volume, motility, and concentration to WHO standards.
- Expert review: Every test is manually reviewed by fertility experts for maximum accuracy.
- Personalized guidance: The accompanying app provides a tailored lifestyle intervention program with tips to improve sperm health.
- Measures key fertility indicator: The test measures Total Motile Sperm Count, a crucial parameter associated with pregnancy success.
-
Gynemed’s GM501 Collagenase media is designed to digest human testicular tissue retrieved during testicular biopsy (TESE). Using this solution, testicular tissue is degraded into single sperm cells, which can then be microinjected into oocytes (ICSI).3 ml bottle
- Raw materials are of highest purity and meet European Pharmacopoeia and USP standards
- Certificate of analysis available by lot number
- Store at 2-8oC in dark location
- 9-month shelf life from time of manufacture
- Use within 7 days of opening
-
Gynemed’s GM501 SpermActive is a ready-to-use medium designed to maintain sperm quality during human sperm preparation processes. SpermActive media supports all types of sperm preparation procedures prior to fertilization, including IUI, IVF and other ART procedures such as sperm washing, testicular tissue (TESE), and swim up techniques like density-gradient centrifugation.50 ml bottle
- Raw materials are of highest purity and meet European Pharmacopoeia and USP standards
- Certificate of analysis available by lot number
- Store at 2-8oC in dark location
- 6-month shelf life from time of manufacture
- Use within 7 days of opening
-
Gynemed’s GM501 SpermMobil is a HEPES-buffered reagent containing low biocarbonate, theophylline and other components that accelerate the movement of immobile sperm. This reagent is well suited to examine and analyze sperm from necrozoospermia ejaculates, or immotile sperm that have been isolated from testicular tissue (TESE). SpermMobil provides a boost of energy to help identify slow but viable sperm that otherwise would have been rejected for ICSI treatment.1 ml bottle
- Raw materials are of highest purity and meet European Pharmacopoeia and USP standards
- Certificate of analysis available by lot number
- Store at 2-8oC in dark location
- 6-month shelf life from time of manufacture
- Use within 7 days of opening
-
Gynemed’s GM508 CultActive is a bicarbonate-buffered reagent that can be used to determine whether fertilization failure was due to deficient oocyte activation in patients with previously failed ICSI cycles. Patient oocytes are activated using CultActive, followed by incubation to investigate oocyte development.1 ml bottle
- Raw materials are of highest purity and meet European Pharmacopoeia and USP standards
- Certificate of analysis available by lot number
- Store at 2-8oC in dark location
- 6-month shelf life from time of manufacture
- Use within 7 days of opening
-
Gynemed’s SpermTrack is a counting chamber for convenient and accurate sperm analysis. Its thin design creates a flow of condensed light from the microscope to the sample, improving optical quality while preventing the creation of visual artifacts that may appear in similar products. With a simple-to-use design for easy microscopy and cleaning, SpermTrack provides a superior view for easier counting and evaluation of sperm motility and morphology in undiluted semen samples.Single unit
- Individual series number on the device allows for full traceability under ISO 13485 standards
- Integrated grid in the cover glass
- designed not to interfere with objectives rotating into place
- 20x objective and a 10x ocular required
- Repeated use with complete accuracy
- No calibration required
- Available in two sizes: 10 μm depth and 20 μm depth (appropriate for veterinary purposes, by special order)
-
Gynétics Strip-ID tips are specialized single-use micropipettes for handling embryos and oocytes during IVF procedures. Designed to be both flexible and unbreakable, these high-quality tips ensure smooth edges for precise denudation, all without scratching your culture dishes. Strip-ID tips are available in a wide range of sizes and come in colour-coded vials for easy identification.Multipack – 10 tips/vial
- Convenient multi-packaging allows for easy removal of a single tip
- Available in a wide range of sizes to best suit your procedures, with colour-coded vials for quick identification of pipette size
- Designed for use with Gynétics’s Pipet-ID, compatible with most popular pipette holders
- Strict individual microscopic quality inspection ensures precise denudation without scratching dish surface
-
The Gynétics Handling Pipette is a single-use IVF laboratory micropipette used for transferring oocytes and embryos from one dish to another.Multipack – 10 tips/vial
- Will not scratch dishes
- Available in three lengths: 45, 55 and 94 mm
- Designed for use with any 1ml syringe
-
The Gynétics Pipet-ID and Pipet-IDs are reusable micropipettors for use in IVF laboratories. Developed to fit Strip-ID micropipettes and other commonly used micropipettes, the Pipet-ID is available in two sizes to comfortably fit every hand in your laboratory.Single unit – 1 micropipettor
- Available in two sizes to provide the most comfortable fit: Pipet-ID for regular to large hands, and Pipet-IDs for small to regular hands
- Ergonomic design
- Fits Strip-ID micropipettes and most other popular plastic micropipettes (Æ9 mm OD)
- Adjustable aspiration volume (min » 0.2 ml, max » 3 ml)
- Total expulsion feature
- Stainless steel table holder and spare parts kit with extra seals, plunger wire and hexagon key included
-
Gynotec’s SpermCryo™ All-round is a concentrated (4X) ready-to-use HEPES-buffered cryopreservation media. This media is ideal for freezing human semen, purified spermatozoa, and testicular biopsies (TESA/TESE) at ultra-low temperatures (-196oC) in liquid nitrogen.2 X 10 ml bottles
- Four-time concentrated HEPES-buffered cryopreservation medium
- Ready-to-use, with a shelf life of 18 months
- 26.7% glycerol content protects sperm from damage during the freezing process
- Sterilized by sterile filtration
-
Gynotec’s SpermFilter® media are ready-to-use density gradients for separation and purification of highly motile human spermatozoa for all sperm wash processes. Composed of silica particles covalently coated with silane and resuspended in isotonic phosphate and HEPES-buffered saline, SpermFilter® density gradients are a reliable suspension media for semen preparation in IUI, IVF, and ICSI procedures. SpermFilter® is available in several sizes and formats: 100% stock solution, 45% gradient and 80% gradient.100 ml or 250 ml
- Ready-to-use, with a shelf life of 18 months
- Silane-coated silica particles
- Osmolair stability with EBSS salts
- Removes sources of ROS, bacteria, and sperm with abnormal DNA
- Improves cryo-survival, yield, and recovery compared to traditional swim-up techniques
-
SpermWash® is Gynotec’s ready-to-use HEPES-buffered medium for all sperm preparation processes. This versatile medium is used for separating healthy motile spermatozoa from the residual semen sample during preparation for IUI, sperm selection, and/or when diluting stock solution of silica-based density gradients. Additionally, SpermWash® can be used for washing human oocytes and embryos, and for embryo transfer processes.100 ml or 250 ml bottle
- Ready-to-use, with a shelf life of 18 months
- HEPES buffer requires no need for CO2 incubation
- Useful in many procedures, including sperm wash processes, oocyte and embryo washing, etc.
-
Hunter Scientific's borosilicate sterile pasteur pipettes are manufactured in compliance with Medical Device Regulations and are certified as Class IIa Medical Devices. These pipettes undergo a thorough multi-stage washing, drying, and sterilization process. Notably, plugged versions use a special non-cotton material to prevent contamination from cotton or fibres. Each pipette features a fire-polished tip, ensuring optimal performance, and they have undergone toxicity testing for safety. The pipettes are conveniently packaged in pouches of five, housed in sturdy shipping boxes for safe transportation — with a distinctive blue box indicating borosilicate glass. Hunter Scientific upholds ISO 13485:2016 QMS standards and is regularly audited for quality assurance.100 pipettes / box (20 pouches of five pipettes each)
- Consistent quality
- Non-cotton plug avoids fibre contamination
- Fire polished tip
- Tamper evident seal
- 100% inspection at each stage of manufacture
- Superior primary & secondary packaging
-
Hunter Scientific offers fire-polished sterile glass Pasteur pipettes, meticulously crafted to ensure precision and reliability for a variety of laboratory applications. Each pipette is sterilized and ready for immediate use in procedures requiring strict hygiene and accuracy. Made from durable glass with a smooth, fire-polished finish, these pipettes ensure consistent performance and ease of use. Ideal for transferring small volumes of liquids in clinical, research, and other ART and IVF settings, their design facilitates precise liquid handling. Packaged to maintain sterility and integrity, Hunter Scientific's fire-polished glass Pasteur pipettes are a dependable choice for professionals requiring efficient and accurate tools.100 pipettes / box (20 pouches of five pipettes each)
- Fire Polished tips
- Strong primary and secondary packaging
- Packed in 20 easy peel pouches each containing 5 Pasteur pipettes.
- Non-cotton plugs avoid fibre drop
- Washed glass
- Certificates of Analysis available
-
Hunter Scientific offers the 230mm variation of their sterile glass Pasteur pipettes, which are expertly crafted with a fire-polished finish for enhanced precision and reliability in laboratory applications. Each pipette, sterilized for immediate use, is designed for strict adherence to hygiene and accuracy standards. The durable glass construction and elongated 230mm length facilitate smooth and precise liquid handling, ideal for transferring small volumes in clinical and research environments. These pipettes are encased in protective packaging to ensure they maintain sterility and structural integrity until needed. Hunter Scientific's 230mm glass Pasteur pipettes are a reliable choice for professionals seeking high-quality, efficient liquid management solutions.100 pipettes / box (20 pouches of five pipettes each)
- Fire Polished tips
- Strong primary and secondary packaging
- Packed in 20 easy peel pouches each containing 5 Pasteur pipettes.
- Non-cotton plugs avoid fibre drop
- Washed glass
- Certificates of Analysis available
-
The Matcher IVF electronic witnessing system is a comprehensive solution designed specifically for IVF clinics and donor banks to ensure accurate patient identification, labeling, workflow scheduling, and traceability throughout the treatment process. By utilizing barcode technology, Matcher minimizes the risk of human error and offers peace of mind to both staff and patients. Using Pocket Matcher and Benchtop Matcher devices, along with ID card and label printers, the Matcher system employs digital photo images to read barcoded labels. The associated software seamlessly integrates with various patient management systems and can be customized to align with clinic-specific Standard Operating Procedures. By incorporating unique barcode identifiers on labels for all labware, media, and consumables, Matcher ensures an audit trail of interactions with gametes and embryos. The system supports the labeling and witnessing of even the smallest items, such as straws and PGT tubes. Additionally, Matcher facilitates the management, reporting, and auditing of cryo stores and vessel space. Clinics that implement the Matcher electronic witnessing system benefit from enhanced safety for staff and patients, streamlined workflow processes, and significant time and cost savings. With its robust error prevention system and comprehensive traceability features, Matcher offers a reliable and efficient solution for maintaining accuracy and compliance throughout the IVF treatment journey.- Error prevention: Alerts to potential mistakes before material transfer occurs.
- Automatic traceability: Matches, confirms, and photographs patient and labware identifiers in every procedure.
- Compliance assistance: Supports clinics in meeting requirements, offering validation and risk assessment support.
- Unbroken chain of custody: Ensures a continuous witnessing chain from registration to cryo stores without additional verification.
- Simple installation: Quick and easy installation process, typically completed within one week, including testing and training.
-
Meet IVF2.0’s ERICA™: Embryo-Ranking Without Biopsy or Media Sampling. ERICA allows you to harness the power of Machine Learning in your lab to objectively rank and prioritize embryos based on euploidy training sets. ERICA is designed to work with you and your equipment and can generally be installed without additional hardware costs. Access is based on a full-service subscription model, so ERICA’s AI ranking is available for use with every case without added cost considerations or decisions. This includes ERICA’s patient specific reports, which are a helpful tool for patient communication and expectations management. By assisting to select the healthiest embryo from your pool, ERICA™ can help increase the chances of successful pregnancy for every transfer.- Ultra-fast and accurate AI-driven embryo ranking system
- Embryo-Ranking Without Biopsy or Media Sampling
- Considers over 200 objective features associated with embryo quality
- Enhances efficiency and consistency in your lab
- Improves communication and patient expectations management
-
IVF2.0’s SiD is an advanced, AI powered, sperm ranking software designed to assist sperm selection in ICSI (intracytoplasmic sperm injection) procedures. SiD’s cutting-edge technology utilizes computer vision algorithms to automatically detect, track and objectively rank the sperm in the video feed from your ICSI microscope. After a momentary analysis step based on published motility parameters, SiD presents the top 3 sperm in the video feed to the embryologist in real-time and with added color coding to further facilitate final comparison and selection. SiD assisted motility evaluation allows greater objectivity and repeatability and allows the embryologist to put more focus on morphological selection parameters. Case studies on SiD implementation have linked its use to better fertilization and blastocyst rates and decreased time to pregnancy. SiD is designed to work with you and your equipment and can often be installed without additional hardware costs. Contact us today to ‘hire’ SiD, your lab’s new AI sperm selection assistant.- Real-time sperm selection based on morphology, speed, and motility patterns
- Identification, tracking, and evaluation of every sperm in the vision field, in real-time
- Continuous learning and improvement with each assisted cycle
- Effortless and accurate judgment of human spermatozoa in suspension
-
Kitazato’s state-of-the-art cooling rack is designed to hold liquid nitrogen during vitrification procedures. Available in two separate sizes to best suit your needs, the cooling rack is combined with a stainless-steel interior insert which can be sterilized. Optional lids for the cooling rack to prevent liquid nitrogen from evaporating are available separately.1 unit, optional lid sold separately
- Small cooling rack is ideal for conservative use of liquid nitrogen (20 X 11 X 11 cm).
- Large cooling rack allows for improved handling of vitrification devices (34 X 12.5 X 11 cm).
- Stainless steel interior container allows for easy sterilization prior to use.