Single unit
- Two options to best suit your workflow: push-button or foot switch
- Requires only 5 minutes per day for start-up, maintenance, and shut-down procedures
- Easily cleaned with ethanol or a non-corrosive decontaminant fluid
-
The Cryo Bio System™ (CBS) SYMS I Sealer is a tabletop device specifically designed to seal CBS High Security straws. Crafted with ionomeric resin, this sealer is highly reliable and durable, requiring minimal maintenance and ensuring optimal operation in the long run. The SYMS I can effectively seal 0.3 ml and 0.5 ml CBS High Security straws, as well as CBS High Security Vitrification straws. These straws are integral components of the CBS closed cryopreservation system, and the SYMS I Sealer ensures a secure seal, contributing to the system's overall safety and effectiveness. The sealer provides users with flexibility in operation, as it can be activated by either a push-button or a foot switch, depending on the user's preference. This user-friendly functionality makes the SYMS I Sealer a valuable asset in laboratories and facilities that use the CBS cryopreservation system. -
The Cryo Bio System™ (CBS) SYMS III Sealer is a bench top unit designed to thermally seal all CBS™ High Security products, including CBS™ High Security 0.3 ml, 0.5 ml and 2 ml straws, CBS™ High Security Tubes, and CBS™ High Security Vitrification straws. Using an automatic detection system, the unit uses pre-set specific combinations of seal temperatures, time and jaw positions for each CBS device. Due to its compact size, the SYMS III can be used in a variety of locations, including on the lab bench, under laminar flow, or even in field operations.Single unit
- Multilingual interface (French, English, Spanish and Chinese) + 4 optional languages
- Laboratory glove-compatible colour touch screen
- Machine cycle display: pre-heating, ready status and sealing in progress
- Two sealing modes: automatic detection or operator-controlled via the touch screen
- Fault signal with messages and alarms
- Display and tracking of maintenance modes
- Easy to clean and service
-
The Narishige MMO-4 micromanipulator is an essential tool enabling precise control of movements during IVF procedures. With its innovative oil hydraulic joystick, the MMO-4 allows for smooth and precise three-dimensional movement using just a single lever. Its improved joystick ensures accurate control and greatly reduces the risk of unwanted movements due to oil pressure. The hanging joystick design allows for comfortable manipulation from a natural posture, enabling longer periods of operation without fatigue. The unit includes the UT-10 Angle Adjustment Tool Holder which provides a stable point of attachment of a pipette. The MM-94 and MM-94B motor-drive coarse manipulators are used for initial positioning of the pipette within the microscope field of view; they are controlled remotely using a joystick controller.Single unit
- UT-10 Angle Tool Holder included
- Microscope Adaptor Bar to fit a wide range of microscopes
- Optional accessories enable the performance of a variety of additional procedures
-
The Narishige Takanome 4-axis Micromanipulator is the ultimate tool for delicate manipulation during IVF procedures. With a four-axis hanging joystick and oil hydraulic control, this micromanipulator provides unparalleled precision. Its fan-shaped pipette holder is designed to allow the user to adjust the angle of the pipette without losing focus on the pipette tip, and the retractable pipette holder makes for easy changes between procedures and reduces the likelihood of breakage. Dedicated adaptors exist for a variety of microscopes, making installation a breeze and ensuring that the micromanipulator is always in an optimal position.Single nit
- Easy pipette attachment
- Focused Pipette Holder angle adjustment design
- Simple and reliable motion from Home to Working position
- Compact design reduces clutter on the work surface
- Available on a wide range of microscopes
-
The Narishige IM-11-2 is a high-precision pneumatically operated microinjector that offers superior operability compared to other injectors. With its coarse-fine coaxial control knob, the IM-11-2 allows for both coarse and fine movement operations, giving users complete control over their microsamples. Additionally, the IM-11-2 has improved pressure change per knob rotation, enabling finer and more powerful control. Unlike other microinjectors, the IM-11-2 is free from worries about air bubbles entering the micropipette during fitting, thanks to its innovative fitting mechanism. This makes regular maintenance, including the removal of fragments of broken pipettes, a breeze. The IM-11-2 also features a one-touch pressure relief valve that allows pressure to escape, enabling volume changes of the syringe inside the microinjector and changing the operational responsiveness.Single unit
- Easy-to-insert/remove tubing connection
- Pressure release with push-button ease
- Responsiveness adjustable to your preference
- Wide range of movement/pressure characteristics
- Visible under ultrasound
-
The Narishige IM-21 Oil Injector is a compact and high-performance oil microinjector that's ideal for a variety of applications, including ICSI, injection of DNA and RNA, CRISPR, injection of ES and IPS cells, nuclear transfer, and cell pick-up. The IM-21 simplifies oil filling and air bubble removal with a plunger that allows for easy back-and-forth movement without turning the control knob. The built-in channel switch eliminates the need for a 3-way stopcock and facilitates easy flow channel switching. And with the easy tube connection, all you have to do is insert the tubing and tighten the knob. The IM-21 even features a built-in plastic cylinder for clear visibility and to eliminate the risk of cylinder breakage.Single unit
- Easy-to-insert/remove tubing connection
- Changeable Plunger Movement
- Built-in Channel Switch/3-way stopcock
- Built-in Plastic Cylinder
-
The Narishige IM-HD1 Pneumatic Injector is the perfect tool for those working with eggs. This injector is exclusively designed for holding eggs and can be attached to a manipulator joystick, allowing for precise and secure egg manipulation with just a forefinger. The IM-HD1 enables simultaneous micromanipulation and suctioning work, making it a versatile tool for various egg-related procedures. The injector comes with two types of tubing, each with a different inner diameter, allowing for customization of response speed. With the Narishige IM-HD1 Pneumatic Injector, you can be confident in your ability to delicately and securely handle eggs for your research needs.Single unit
- One-finger aspiration/release of holding side pipette
- Less clutter on workbench
- Available for Classic or Takanome Micromanipulators
-
The Esco MIRI® Multiroom incubator is an excellent choice for safeguarding embryos in your IVF laboratory. Its six (6) separate chambers not only provide embryologists with a larger capacity to accommodate more embryos but also ensure that environmental conditions are maintained even when adjacent chambers are accessed. The incubator offers the best temperature recovery, accuracy, and uniformity in the IVF market, thanks to its heated lid design. This design guarantees that the temperature provided to your embryos is not solely sourced from the dish's bottom but also delivered from the top, maintaining a set point of 37.2C to ensure a consistent temperature of 37.0C for your samples. The Esco MIRI® Multiroom incubator provides the choice to use pure N2 and CO2 gases, which are more affordable than premixed gases. It recirculates these gas inserts, giving you the best value for your money. This feature also offers you the flexibility to adjust your gas concentration as needed to optimize embryo culture protocols in your laboratory. Additionally, the MIRI® Multiroom is compatible with the most commonly used brands of culture dishes in the market.UNIT
- 6 individually-controlled chambers
- Integrated gas mixer; CO2 and O2 Control
- Extremely reliable and easy-to-use
- Best-priced incubator on the market
- Optional integrated SafeSENS pH System
- Optional Stacking Frame for 2 units
-
The Esco MIRI® Humidified Multiroom incubator is an excellent choice for safeguarding embryos in your IVF laboratory. Its six (6) separate chambers not only provide embryologists with a larger capacity to accommodate more embryos but also ensure that environmental conditions are maintained even when adjacent chambers are accessed. The incubator offers the best temperature recovery, accuracy, and uniformity in the IVF market, thanks to its heated lid design. This design guarantees that the temperature provided to your embryos is not solely sourced from the dish's bottom but also delivered from the top, maintaining a set point of 37.2C to ensure a consistent temperature of 37.0C for your samples. The humidified MIRI includes a built-in humidity sensor for accurate and continuous readings, with a water bottle located on the side of the unit for refilling and easy control of water level. The Esco MIRI® Humidified Multiroom incubator provides the choice to use pure N2 and CO2 gases, which are more affordable than premixed gases. It recirculates these gas inserts, giving you the best value for your money. This feature also offers you the flexibility to adjust your gas concentration as needed to optimize embryo culture protocols in your laboratory. Additionally, the MIRI® Multiroom is compatible with the most commonly used brands of culture dishes in the market.Single unit
- Humidity Bottle allows circulating gas to be humidified
- 6 individually-controlled chambers
- Integrated gas mixer; CO2 and O2 Control
- Extremely reliable and easy-to-use
- Best-priced incubator on the market
- Optional integrated SafeSENS pH System
- Optional Stacking Frame for 2 units
-
Available with 6 or 12 chambers, the MIRI® Time-Lapse Incubator is a multiroom incubator that comes equipped with a microscope and camera. The integrated camera and microscope offer real-time, high-quality time-lapse images of embryo development, eliminating the need for manual microscopy and the potential risks associated with removing embryos from the safe environment of the incubation chamber. With time-lapse embryo monitoring, detailed morphokinetic data throughout the entire developmental process can be gathered, providing insights not available through traditional spot microscopic evaluation. This allows for the observation of all critical events, aiding in the identification of healthy embryos with the highest potential for implantation, and ultimately resulting in higher pregnancy rates. The process of embryo annotation has been simplified with an innovative annotation system, which revolves around “events” located on the left side of the interface. The pre-programmed events list includes t2, t3, t4, t5, t6, t7, t8, morula, blastocyst, and early blastocyst, but the software allows for complete customization of each event. Users can modify the pre-programmed events list by adding other criteria using the advanced parameters in the unit’s Settings menu. To make the process even more user-friendly, an Ideal Time function has been added, represented by a colored circular band on the edge of annotated events. This feature indicates the ideal timings for each event, making it easier to compare the actual timing of embryo development with the ideal timing. In addition to the integrated timelapse and annotation functionality, these incubators feature all of the advantages standard to the MIRI product line, including distinct chambers which ensure the maintenance of environmental conditions, a heated lid to enhance temperature regulation and recovery, an onboard gas mixer, and an optional integrated SafeSENS pH system.UNIT
- Available in 6 or 12 Chambers
- 6 individually-controlled chambers
- Integrated gas mixer; CO2 and O2 Control
- Extremely reliable and easy-to-use
- Best-priced timelapse incubator on the market
- Optional integrated SafeSENS pH System
- Available with Fairtility CHLOE AI System
-
The Esco MIRI® II-12 Multiroom Incubator is a top-of-the-line solution for IVF laboratories, able to meet exacting standards of performance and validation. The incubator features 12 chambers and 24 independent PID temperature controllers to ensure minimum environmental stress for embryos. Each compartment is separate and does not affect the temperature of other chambers. The lid temperature and the temperature in the culture chambers can be regulated and controlled separately, with PET layers separating the top and bottom of each compartment. And because it includes a separate PT-1000 sensor for each compartment, the MIRI® II-12 incubator can accurately monitor and control the temperature of each chamber individually, ensuring optimal conditions for embryo development. The circuitry for the PT-1000 sensors is separated from the unit's electronics, so it remains a genuinely independent validation system. The MIRI® II-12 incubator uses pure CO2 and N2 gases, allowing for precise control of CO2 and O2 concentrations in each chamber. The incubator features a recirculated gas system that ensures quick and complete gas replacement in less than five minutes, with gas cleaned by a 254 nm UVC light with filters to prevent dangerous ozone production. The incubator also has a complete gas control system, including pressure regulators, gas flow sensors, gas pressure sensors, and gas filters. The incubator's software runs on a built-in touchscreen and includes logging functions for long-term data storage, as well as a USB module for off-site evaluation of quality control data. The incubator also includes a pH sensor port, allowing users to measure the pH of samples at any time.Single unit
- 12 individually-controlled chambers
- real-time datalogging touchscreen
- Integrated gas mixer; CO2 and O2 Control
- Extremely reliable and easy-to-use
- Optional integrated SafeSENS pH System
-
ESCO’s Multi-Zone ART Workstations feature a vertical laminar flow and are equipped with multiple heating zones which provide temperature control throughout the work surface. The ten distinct zones, each with its own heating elements and sensors, automatically prioritize power distribution and provide the user with precise temperature regulation and rapid recovery. Four different temperature modes allow activating and deactivating different zones, simplifying vitrification cooling and warming procedures. These workstations are available in a variety of sizes and configurations to meet different requirements, with options including built-in microscopes and integrated MIRI® chambers. These workstations provide digital control of premixed gas, allowing for precise sample environmental control. An ULPA filtration system ensures clean airflow, filtering particles 10 times smaller than those caught by HEPA filters. The workstation's humidification system and positive pressure work environment ensure that your samples remain safe and uncontaminated. These workstations come equipped with a fully functional integrated touchscreen Windows PC interface that displays real-time information on all work area parameters, including zone temperature performance, gas pressure, and flow rate. The touchscreen interface is easy to use and allows for seamless temperature monitoring and control. With the variety of size and option configurations available, there is sure to be an ESCO IVF Heated Multi-Zone Workstations that fits your needs for safety, reliability, and accuracy.Single unit
- Available in 4 or 6 foot configurations
- Multi-Zone temperature control with Vitrification Mode
- Integrated, fully functional Windows touchscreen PCs
- ULPA Main Filter (99.9995% efficiency for the removal of 0.12 µm diameter or larger PM)
- Integrated humidification system using pre-mixed gas
- Optional tabletop built-in gassed and heated MIRI Chambers
- Quietest hood on the market
-
The CelCulture® CO₂ Incubator is equipped with a range of advanced features, including rapid temperature and gas recovery, ISO Class 5 cleanliness, an ISOCIDE™ antimicrobial coating, and an inner door kit that reduces the risk of contamination. Designed to create an environment that mimics the natural conditions required for the development of embryos, the incubator is able to maintain low levels of oxygen. This is achieved through the use of sophisticated firmware and precision sensors that monitor and regulate the temperature, CO2, and O2 levels within the chamber. The inner door kit further enhances the incubator's performance by facilitating fast parameter recovery and reducing the risk of contamination, with each section of the incubator featuring a dedicated door panel. Available in CO2+O2 control, or CO2-only control.Single unit
- Advanced IR CO2 Sensor
- Advanced, new-generation Zirconia O2 Sensor
- Integrated gas mixer; CO2 and O2 Control
- Extremely reliable and easy-to-use
- Fast Temperature and Gas Recover
- Optional integrated SafeSENS pH System
-
The Mini MIRI® Dry incubator is a compact and affordable solution for IVF laboratories that prioritize space and cost-effectiveness. With its two-chamber design, it is modeled after the classic MIRI® Multiroom incubator. This dry IVF bench top incubator is unique in that it can recirculate gas within the incubator, and is compatible with a HEPA/VOC filtration system, which is not typical of other humidified IVF incubators. The gas, whether pure N2 and CO2 or premixed, first flows through the tri-gas mixing chamber, where the user sets the desired CO2 and O2 gas concentrations. The gas then passes through the HEPA/VOC filter before entering the incubator chambers. Afterward, the gas undergoes sterilization using UV light (254nm) before returning to the tri-gas mixing chamber and recirculating within the system. This design ensures minimal gas consumption even with lid openings and maintains the recirculating air's cleanliness and safety for the embryo samples.Single unit
- 2 individually-controlled chambers
- Integrated gas mixer; CO2 and O2 Control
- External Validation Ports for Gas and Temperature
- Datalogging Software Included
- Optional integrated SafeSENS pH System
-
The ESCO Airstream Laminar Flow Air Flow Cabinet is an excellent choice for clinics and labs which require a sterile workspace with a constant filtered airflow. These benches provide a sterile environment ideal for medical and laboratory applications, as purified air travels across the working zone of the cabinet in a vertical, unidirectional stream. Airstream benches offer a high level of protection for both samples and users, ensuring the aseptic and particle-free conditions that are necessary for safe work with samples in open dishes. This vertical laminar flow workstation provides sample protection with ULPA filtration, which is 10x as efficient as HEPA filtration and creates an ISO Class 3 work zone. The laminar flow bench is highly efficient, incorporating the latest generation of DC ECM motors, and is able to maintain a stable airflow despite voltage fluctuations. This stable airflow eliminates turbulence and the possibility of dead corners in the work zone. In addition to its filtration capabilities, the ESCO Airstream Laminar Flow Bench also offers a comfortable low noise level of 52dBA* (LVG-4A in open field condition). The ESCO Airstream Laminar Flow Air Flow Cabinet has been tested for cross-contamination and product protection using a microbiological test method adopted from EN12469. The laminar flow bench also features an ISOCIDE™ Powder Coat (silver-impregnated), which inhibits microbial growth, improving safety. Each clean bench is individually factory tested for safety and performance in accordance with international standards.Single unit
- AISOCIDETM powder coat (silver-impregnated) inhibits microbial growth to improve safety
- Low-noise with energy-efficient ECM blowers
- ULPA (ultra low particulate air) filtration is 10x more efficient than HEPA filtration and creates an ISO class 3 work zone
- ULPA Main Filter (99.9995% efficiency for the removal of 0.12 µm diameter or larger PM)
- Improved safety with airflow sensors that monitor airflow in real-time and alerts users of insufficient airflow
-
The MIRI GA® is a tabletop device specifically designed for external validation of gas concentration and temperature in IVF incubators. This versatile device can validate various types of Esco Medical IVF incubators, including the MIRI® Time-lapse Incubator, MIRI® Multiroom Incubator, Mini MIRI® Incubators, and other brands. Unlike conventional handheld validating devices that require separate devices for temperature and gas concentration measurements, the MIRI® GA can perform both measurements concurrently. Moreover, the device can measure gas and temperature continuously 24/7, whereas conventional devices perform measurements at regular intervals. With its gentle and adjustable gas suction rate of 3L/h, the MIRI® GA consumes less gas than conventional devices, which can use up to 12L/h. The device also features data logging software, including an adjustable alarm threshold, which is not available in conventional devices. Additionally, the MIRI® GA can monitor up to six incubation chambers simultaneously, while conventional devices can only validate one unit at a time.Single unit
- 6-Channel gas and temperature validation
- Continuous 24h/7 days monitoring
- Gas Feedback Loop into incubator
- Datalogging Software
-
The Mini MIRI® Humidity Incubator is a compact and reliable humidified mini bench top incubator that is based on the robust MIRI® design. Its direct heat regulation and compact design prevent vapor condensation and contribute to faster temperature and gas recovery. This humidified incubator uses either premixed gases or pure gas (N2 and CO2) inserts that pass through a tri-gas mixing chamber, ensuring precise gas concentrations before entering the incubator chambers. The gas then recirculates and goes through the gas mixing chamber again, minimizing gas consumption.Single unit
- 2 individually-controlled chambers
- Integrated gas mixer; CO2 and O2 Control
- External Validation Ports for Gas and Temperature
- Datalogging Software Included
- Optional integrated SafeSENS pH System
-
The MiOXSYS® is a male oxidative stress testing system specifically designed to evaluate Male Oxidative Stress Infertility (MOSI). By providing swift and reliable static oxidative-reductive potential (sORP) values, it facilitates an assessment of male fertility potential. The sORP value encapsulates the complete range of oxidants and antioxidants in the sample, demonstrating the oxidative equilibrium within the sperm cell and its environment. The system's capacity to offer a predictive positive value (PPV) of more than 95% distinguishes it within the realm of male fertility diagnostics. MiOXSYS® is the only system on the market backed by extensive clinical research and patent protection. The accuracy of the MiOXSYS® largely relies on its specialized sensor, which comprises a single-use, platinum-based, stable state electrode sensor coupled with an Ag/AgCl reference cell. The seminal plasma is drawn in through a filter on the sample port, which then migrates across the working electrode to fill the reference cell, thus establishing the electrochemical circuit essential for precise ORP measurement. The accompanying MiOXSYS® analyzer system and software have been thoroughly validated, with over 10,000 clinical samples tested. Overall, the MiOXSYS® system is designed to be user-friendly, ensuring quick and easy operation.Single unit
- Provides a comprehensive evaluation of all oxidants and antioxidants in the sample
- Swiftly delivers static oxidative-reductive potential (sORP) values, which predict male fertility potential with a positive predictive value (PPV) of over 95%.
- A preferred diagnostic system for Male Oxidative Stress Infertility (MOSI).
-
The OKOLAB Heated Plate designed for inverted microscopes utilizes an Indium Tin Oxide (ITO) coating, which ensures consistent heating across the entire glass surface. These plates are also equipped with a surface sensor, guaranteeing precise and accurate temperature measurements. The heated plates are compatible with various inverted microscope brands, providing support for a wide range of models available in the market. The plates are offer both metal and glass heating to cater to different preferences and requirements. The DragonTail glass used in the heated plates is chemically strengthened and further safeguarded by a sturdy aluminum frame, ensuring durability and protection.Single unit
- 0.5 mm thick, scratch-resistant, break-resistant glass
- DragonTail Glass 10 years warranty against damage
- aluminum frame for increased rigidity
- Available in Metal heated and Glass Heated options
- All microscope types and rages
- Requires heating controller
-
The OKOLAB Heated Plate designed for stereo microscopes utilizes an Indium Tin Oxide (ITO) coating, which ensures consistent heating across the entire glass surface. These plates are equipped with a surface sensor, guaranteeing accurate and precise temperature measurements. The heated plates are compatible with various stereo microscope brands, supporting a wide range of models available in the market. The plates are offer both metal and glass heating to cater to different preferences and requirements. The glass used in the heated plates is chemically strengthened and further safeguarded by a sturdy aluminum frame, ensuring durability and protection.Single unit
- 1mm thick, scratch-resistant glass
- aluminum frame for increased rigidity
- Available in Metal heated and Glass Heated options
- All microscope types and rages
- Requires heating controller
-
The Okolab Heated Glass Table is a versatile heating solution. Its adjustable design ensures compatibility with a variety of microscopes. The table provides a flat and transparent surface with precise temperature controls. The temperature can be regulated from ambient levels up to 60°C. Please note, the heated glass table requires an OKOLAB Heating Controller for operation.Single unit
- 2.0 mm thick, scratch-resistant, break-resistant glass
- 10 years warranty against glass damage
- aluminum frame for increased rigidity
- All stereo microscope types and ranges
- OKOLAB Heating controller required
-
The OKOLAB H401-T-PAD is a versatile heated flat metal plate designed to convert any surface, such as a table top or cabinet work area, into a temperature-controlled environment. Available in three sizes - small (174x234 mm), medium (297x210 mm, A4 size), and large (420x300 mm, A3 size) - it provides flexibility to suit various workspace requirements. The H401-T-PAD operates in conjunction with either the H401-T-CONTROLLER or the H401-T-PENNY, enabling precise temperature control for optimal sample conditions. This tool is an ideal solution for laboratories seeking to create consistent, controlled temperature zones on existing work surfaces.Single unit
- Plate calibration can be performed in the lab by the operator
- Temperature range: 27 to 45°C
- Temperature sensor accuracy: ±0.1°C
- Temperature accuracy on specimen: ±0.3°C, after self calibration, if room temperature remains within ±1°C
-
The OKOLAB H401-T-CONTROLLER is a 2-channel temperature controller equipped with a 4.3'' touch screen interface. It can independently control up to two H401 heating devices simultaneously, allowing for increased lab efficiency. The controller includes an external temperature sensor and self-calibration routines, facilitating precise calibration and ensuring the highest accuracy of sample temperature. The controller also features built-in data logging capabilities, enabling temperature recording over time, along with logging calibration events and alarms. The data can be easily downloaded to USB drives for further analysis. For enhanced security, the controller is equipped with password-protected routines for re-calibrating sensors against certified thermometers. The H401-T-PENNY is a compact single-channel temperature controller. Compatible with all OKOLAB single-channel metal and glass heated plates and heated objective collars, it blends performance with simplicity and affordability without compromising on quality or functionality.Single unit
H401 T-Controller:- Dual Channel: one controller can control independently up to two devices
- Self calibration routines allow to improve temperature accuracy
- External T - sensor (included)
- On-board Data logging and download routines to USB drive
- On-board logging of calibration and alarm events
- Alarm buzzer and External Alarm Connector
- Password protected procedure for periodic calibration against certified thermometer
- One-Point Temperature Calibration and Adjustment
- Performance and simplicity at an affordable price
-
The OKOLAB Tri-Gas Mixer is a versatile and precise CO2-O2 controller, engineered for optimal control over gas concentrations and pressure. The system mixes CO2, air, and N2 to achieve desired concentrations from 0-10% for both CO2 and O2, and it can manage controlled pressure within the range of 0-2 barg (0-30 psig). An adjustable knob on the embedded pressure gauge allows users to easily regulate delivery pressure. To assure consistent composition, the Tri-Gas Mixer comes with a mixing tank that provides stability even with variable output flows. It features compatibility with any mini incubator on the market, demonstrating flexibility and adaptability to diverse lab environments. The system includes a CO2-O2-MODULE, housing the CO2 and O2 sensors, which deliver high accuracy volume concentration measurements. These sensors facilitate automatic fine-tuning of the output gas. The module is factory calibrated, with a calibration certificate included in electronic format. On-site calibration or module replacement are also options, both of which do not require the disconnection or turning off of the Tri-Gas Mixer. An added advantage of the Tri-Gas Mixer is its self-calibration procedure. This can be periodically carried out to maintain high accuracy, using a connected calibration gas that closely matches standard working condition concentrations. This procedure can also be manually initiated if needed, and does not interrupt the delivery of gas to connected incubators. Two configurations of the Tri-Gas Mixer are available, offering maximum output flow rates of 1.5 L/min and 15 L/min.- Automatic switch to backup cylinder upon alarm
- On board memory for data logging
- Auto calibration with an external calibration gas
- Contact closure alarm
- Auto diagnostic procedure
- VOC-IN-BYPASS (optional) : VOC filter's holder with bypass panel to saturate newly installed filters with CO2 before using them with the tri-gas mixture