-
A growing body of scientific evidence demonstrates the impact of airborne contaminants on IVF success rates. Fertitech Canada offers detailed air quality assessments that accurately log VOCs and particle concentrations in IVF labs, highlighting air quality variations throughout the day and week. More specifically, our air quality assessment and monitoring services enable clients to identify, quantify, and target previously unknown risks and contamination points. We offer temporary air quality remediation during renovations and assist with more permanent solutions that enhance overall air quality and infection control. Rely on Fertitech Canada's expertise and advanced technology to optimize your lab conditions for ideal air quality. -
Fertitech offers rental of Novaerus air filtration equipment to effectively tackle air quality issues in environments affected by temporary disturbances or contamination sources. Ideal for situations where particulate matter or volatile organic compounds (VOCs) have compromised air quality, Novaerus technology swiftly and reliably restores air to safe parameters. Our rental service provides a practical and efficient solution for restoring and maintaining optimal air quality, ensuring health and safety standards are met without the need for permanent installation. Trust Fertitech to provide top-tier air filtration solutions when and where you need them most. -
The ACE Single Lumen Ovum Pickup Needle (OPU) by Allwin® is used for laparoscopic or ultrasound-guided transvaginal oocyte retrieval. Designed with an ergonomic handle and highly echogenic tip, the ACE Single Lumen OPU Needle ensures comfort and clear visualization during procedures. Needles are 35cm in length and are available in 16, or 17 gauge.10 / box
- Echogenic tip enhances visualization under ultrasound
- Silicone bung for a tight fit and oocyte safety during collection
- Non-coring needle
- Luer lock connector
- Ergonomic handle for comfort and control
- 100 cm aspiration line
-
Allwin®’s Bulb Trans Star is an embryo transfer catheter designed with several features to help improve embryo placement and IVF success. An echogenic band on the inner catheter improves visibility under ultrasound and optimizes embryo placement in the uterine cavity. The guide catheter features a rounded bulb tip and angled outer sheath which allows easy insertion through the cervix. An optional stylet which can be molded to provide rigidity and shape for difficult anatomies is also available.10 / box
- Supported soft inner catheter with smooth tip minimizing trauma
- Firm outer sheath for precise control
- Scale markings on inner and outer sheath to monitor and control insertion
- Silicone depth positioner for precise placement
- Catheters and stylets available in two lengths: 18 cm and 23 cm
- Also available with non-echogenic tip, Bulb Trans Ultra (AW-BT-ETC-U)
-
The Bulb Trans Ultra embryo transfer catheter by Allwin® is used to place in vitro fertilized (IVF) embryos into the uterine cavity. The guide catheter features a rounded bulb tip and angled outer sheath to allow easy insertion through the cervix.10 / box
- Supported soft inner catheter with smooth tip minimizing trauma
- Firm outer sheath for precise control
- Scale markings on inner and outer sheath to monitor and control insertion
- Silicone depth positioner for precise placement
- Mouse embryo assay tested (MEA)
- Limulus amebocyte lysate tested (LAL)
-
The EAGLE Single Lumen Ovum Pickup Needle (OPU) by Allwin® is used for laparoscopic or ultrasound-guided transvaginal oocyte retrieval. Designed with an ergonomic handle and highly echogenic tip, the ACE Single Lumen OPU Needle ensures comfort and clear visualization during procedures. Needles are 35cm in length and are available in 17 gauge.10 / box
- Echogenic tip enhances visualization under ultrasound
- Silicone bung for a tight fit and oocyte safety during collection
- Non-coring needle
- Luer lock connector
- Ergonomic handle for comfort and control
- 100 cm aspiration line
-
The Echo Trans embryo transfer catheter from Allwin® is fully echogenic – its unique design provides increased visibility during ultrasound guided embryo transfer procedures. The Echo Trans helps introduce the embryo into the uterine cavity with ease while maximizing your IVF success. Echo Trans trial catheters are also available for purchase for difficult cases.10 / box
- Soft material with smooth tip to decrease trauma
- Measurement scale marked on inner and outer sheath for precise placement
- Formable out sheath to mould catheter for unique patient anatomies
- Trial catheter available for difficult cases
- Embryo transfer catheter and trial catheter available in 18 cm or 23 cm
-
Allwin's Hysterosalpingography Catheters are specifically designed for use in hysterosalpingography (HSG) procedures, a key diagnostic tool in fertility assessments. This catheter facilitates the injection of contrast media into the uterine cavity and fallopian tubes, allowing clinicians to evaluate the patency of the fallopian tubes and the shape of the uterine cavity. This catheter is an essential tool for fertility clinics and diagnostic centers, offering reliable performance during HSG procedures. This catheter is available in open- and closed-tip versions to meet varying clinical requirements.5 / box
- 7 Fr Balloon: A low-profile balloon ensures secure placement within the cervix during the procedure, reducing the risk of contrast leakage.
- Open Tip Design: The open tip allows for the smooth injection of contrast media directly into the uterine cavity and fallopian tubes, providing clear imaging results.
- Stopcock Control: Integrated stopcock provides precise control over the inflation of the balloon and the flow of contrast media, ensuring accurate administration.
- Stylet Included: The catheter comes with a stylet for added rigidity, aiding in the easy introduction and placement of the catheter within the cervical canal.
- 3 ml Syringe: A syringe is included for the controlled inflation of the balloon or administration of contrast media.
-
The Insemina Intra Uterine Insemination Catheter by Allwin® features a silicone depth positioner and clear centimetre markings to ensure precise placement during insemination. This soft uterine catheter with firm support is available in two styles: Fertitech carries a traditional open tip catheter for direct introduction of washed spermatozoa into the uterine cavity; or a closed tip catheter with lateral side eyes, to better align with the opening of fallopian tubes, is available by special order upon request.25 / box
- Soft material with firm support
- Silicone depth positioner for precise placement
- Centimeter markings for depth measurement
- Available with open tip or lateral side-eyes opening
-
Allwin®’s Curved Intra Uterine Insemination Catheter features a pre-curved shape, a silicone depth positioner, and an open tip for direct introduction of washed spermatozoa into the uterine cavity.25 / box
- Soft material with firm pre-curved support
- Silicone depth positioner for precise placement
- Available with open tip
- Human sperm survival assay tested (HSSA)
- Limulus amebocyte lysate tested (LAL)
-
The Flexi Intra Uterine Insemination Catheter by Allwin® features a shapeable outer sheath for easy insertion, with a separately available stylet. With clear centimeter markings, this catheter ensures precise placement with each insemination. Choose from two available styles: Fertitech carries a closed tip catheter with lateral side eyes, to better align with the opening of fallopian tubes; or a traditional open tip catheter for direct introduction of washed spermatozoa into the uterine cavity may be available by special order upon request.25 / box
- Smooth tip and flexible outer sheath with memory
- Silicone depth positioner for precise placement
- Centimeter markings for depth measurement
- Available with open tip or lateral side-eyes opening
-
Allwin®’s Ovumpick Double Lumen Ovum Pickup Needle (OPU) is used for laparoscopic or ultrasound-guided transvaginal oocyte retrieval. Featuring an ergonomic handle and highly echogenic tip, the Double Lumen OPU Needle provides clear visualizing while ensuring user comfort during procedures. The Ovumpick’s outer lumen allows for flushing of follicles during the procedure. Needles are 35 cm in length and are available in 16 or 17 gauge.10 / box
- Echogenic tip enhances visualization under ultrasound
- Silicone bung for a tight fit and oocyte safety during collection
- Non-coring needle
- Luer lock connector
- Ergonomic handle for comfort and control
- Outer lumen allows for flushing of follicles
-
The Pro Echo Trans embryo transfer catheter by Allwin® contains micro bubbles along the full length of the catheter, thus increasing visibility under ultrasound. This unique feature, combined with its pre-curved design, provides users with accuracy, precision, and control during embryo transfer procedures. The Pro Echo is available with a soft obturator to assist in passing through the cervix as well.10 / box
- Supported soft inner catheter with smooth tip minimizing trauma
- Scale markings on inner and outer sheath to monitor and control insertion
- Silicone depth positioner for precise placement
- Flexible catheter for unique anatomies
- Orientation arrow on the hub
- Angled outer sheath provides easy passage through the cervix
- Catheter available in two lengths: 18 cm and 23 cm
- Fully echogenic, micro bubble technology increases visibility under ultrasound
-
The PRO-VAC Endometrial Biopsy Sampler, created by Allwin Medical Devices, is a tool designed for endometrial tissue collection and uterine menstrual content extraction, aiding in histological biopsies. The PRO-VAC sampler offers a practical solution for professionals conducting endometrial examinations and procedures.25 / box
- Centimeter marking provided on the catheter for precise placement
- Smooth rounded curved tip
- Locking syringe
-
The Trackable Intra Uterine Insemination Catheter by Allwin® is a soft uterine catheter with firm support featuring a malleable stylet and silicone depth positioner to aid insertion. Two styles are available: Fertitech carries a closed tip catheter with lateral side eyes, to better align with the opening of fallopian tubes. A traditional open tip catheter for direct introduction of washed spermatozoa into the uterine cavity may also available by special order.25 / box
- Soft material with support and malleable stylet
- Silicone depth positioner for precise placement
- Centimeter markings for depth measurement
- Available with open tip or closed tip with lateral side-eyes opening
- Human sperm survival assay tested (HSSA)
- Limulus amebocyte lysate tested (LAL)
-
The Trial Transfer Catheter is a closed-ended device designed to assess cervical passage prior to embryo transfer, complementing Allwin's Embryo Transfer Catheter. It facilitates precise positioning of the outer sheath before the introduction of the embryo-loaded catheter.10 / box
- Ensures accurate positioning of the outer sheath for embryo transfer.
- Constructed from soft material with a smooth tip to reduce patient discomfort.
- Features centimeter depth markings for precise placement.
- Tested with Limulus Amoebocyte Lysate (LAL) to verify non-pyrogenicity.
-
Alpha‑Tec’s FructoScreen Kit measures the amount of fructose in seminal plasma using a photometric method. Ejaculated spermatozoa are primarily powered by fructose produced in the seminal vesicles and found in seminal plasma. The concentration of fructose in ejaculate can provide information about the secretory function of the vas deferens, and/or the possibility of low androgen levels. FructoScreen produces a yellow-orange colour to indicate the presence of fructose, and its intensity directly correlates with increasing concentrations of fructose in seminal plasma. Both the concentration and total amount of fructose present can be calculated from this point. Product packaging may differ from image.96 Tests / Kit
- Easy two-step protocol gives results in approximately 40 minutes
- Colorimetric result with visible contrast that can be quantified
- Each kit includes all five reagents required for test completion
- 18-month shelf life from date of manufacture
-
Alpha‑Tec’s ImmunoSpheres® are a Immunobead Test (IBT) used to detect the presence or absence of antisperm antibodies (ASA) when screening for immune-mediated male infertility or unexplained infertility in couples. Four ImmunoSphere® reagent kits are available to detect distinct anti-sperm immunoglobulin isotypes: Anti IgA, Anti IgG, Anti IgM and Anti Ig (Heavy and Light chain). Both direct and indirect testing methods can be used with ImmunoSpheres®. Direct testing requires spermatozoa to be washed to remove any free immunoglobulins in the seminal plasma. Indirect testing can be used for reproductive fluids such as seminal plasma, follicular fluid, cervical mucus, as well as serum. A positive test result is defined as ≥ 20% of motile spermatozoa binding to the ImmunoSpheres®; a clinically significant test result produces ≥ 50% of motile spermatozoa being bound. Product packaging may differ from image.100 tests / kit
- A reliable, specific test for the detection of sperm-bound antibodies and sperm antibodies in reproductive fluids and serum
- Allows the determination of antibody class attached to spermatozoa, the localization on the spermatozoa, and the proportion of spermatozoa coated with antibody
- Produces results in less than 30 mins
- Monodispersed, does not clump together
- Latex bead size = uniform 3.0 μm
- Spermatozoa must be washed prior to testing
- Requires a centrifuge and a bright field or phase contrast microscope
- Bead colours: IgA (blue), IgG (blue), IgM (blue) Ig(H&L) (white)
- 18-month shelf life from date of manufacture
- Store reagents at 4°C
-
Alpha‑Tec’s LeucoScreen™ is a simple assay for detecting granulocytes in semen. Elevated levels of white blood cells in semen, also known as leuco-cytospermia, is associated with the production of residual oxidative stress (ROS), which affects sperm parameters such as motility, morphology, and DNA integrity. LeucoScreen™ uses a staining method to visualize the presence of the enzyme peroxidase in cells, in order to determine overall semen quality. Product packaging may differ from image.50 tests / kit
- Simple visualization of granulocytes in semen samples
- Minimal preparation involved, all reagents are ready to use as is
- Requires a single step, with immediate results
- Colorimetric result with visible contrast for easy interpretation
- Provides a minimum of 50 and as many as 300 determinations per kit, depending on use
- Does not require a blood specimen as a control, a peroxidase control is included in each kit
- 18-month shelf life
-
Alpha‑Tec’s MarScreen® is a quick and simple assay for testing fresh semen samples. Using a combination of antiserum to human IgA, IgG, and bead-conjugated IgG antibodies, MarScreen® can test for the presence or absence of antisperm antibodies (ASA) on the surface of sperm within minutes, making it an ideal tool for screening for immune-mediated male infertility or unexplained infertility in couples. MarScreen® can be used with direct and indirect testing methods. For direct testing, fresh ejaculate is used. Indirect testing requires a patient blood sample or serum. Product packaging may differ from image.70 tests / kit
- Available for 2 different antibodies: IgA or IgG
- Test can be performed and analyzed in less than 10 minutes (faster preparation than ImmunoSpheres®)
- Suitable for lower sperm count/motility samples compared to the ImmunoSpheres® test kit
- Compatible with both direct and indirect testing methods: use fresh, unwashed semen samples for direct testing, or patient blood / serum for indirect testing
- Kits have a built-in positive control
- Uniform coloured beads for easy-to read results
- 18-month shelf life
-
Alpha‑Tec’s QC-Beads™ are a solution of latex beads that can be used to establish controls during semen analysis. Each ready-to-use kit has known “high” and “low” concentrations of QC-Beads™ that standardize counting parameters. QC-Beads™ can be used to analyze a technician’s manual counting technique using a microscope, or to measure the performance of an automated semen analyzer’s optical system and image processing. Before performing any sperm counting, a daily quality control check using the two concentrations of QC-Beads™ is recommended. Product packaging may differ from image.2 X 4 ml vials (4 ml of each concentration)
- Kit contains two known concentrations of latex beads suspended in aqueous solution
- Ready-to-use
- FDA approved for in vitro diagnostic use
- Store at room temperature
- 24-month shelf-life
-
Alpha‑Tec Serum Control Kits are used to establish controls during antisperm antibody assays. The Serum Control Kit’s positive serum contains IgA and IgG antibodies, whereas its negative serum contains no detectable antibodies against sperm. Using a positive control during direct sperm antibody testing can overcome the impracticality of using antibody-positive sperm specimens as positive controls. Using a negative control during testing is also recommended. Both Sperm Antibody Positive A/G Serum and Sperm Antibody Negative Serum have been tested and found to be negative for HIV antibodies and hepatitis B surface antigens, however negative results do not guarantee absence of these viruses. Product packaging may differ from image.1 kit (1 ml of each serum)
- Suitable as a control for both direct and indirect sperm antibody assays
- Ready to use
- Serum is stable, heat inactivated, and undiluted
- 18-month shelf life
-
It is crucial for successful IVF laboratories to maintain quality and control. The 6-month filter by ASTEC is an inline gas filter that utilizes a unique micro-carbon technology with a large, activated carbon surface area. This technology ensures uniform gas flow and high purification. Filters are placed between CO2 gas sources and incubators to purify incoming CO2, N2, and premixed gas against chemically active compounds (CACs), volatile organize compounds (VOCs), microorganisms, and other harmful compounds and particles. Accessories include magnetic mount that allow filters to be securely fastened to equipment and filter connectors for 8mm tubing.Multipack (case of 4 individually packed filters)
- Each filter is produced in a cleanroom in a fully controlled environment and pressure tested to ensure high product safety and effectiveness
- Removes VOCs, CACs, microorganisms, dust, and other particles
- Combination of activated carbon granules, HEPA filter and pre-filters ensures high VOC removal capacity and traps particles (H14 efficiency ≥ 99.995%)
- Manufactured without the use of chemicals to ensure safe embryo development
- Filters have been used globally for many years in renowned IVF clinics as the main gas purification tool
-
The ASTEC CUBE AD-3100 is a versatile drawer-type incubator designed to offer exceptional space efficiency and functionality. With four individual incubator drawers that can slide out independently for use at a workstation, the CUBE AD 3100 is a convenient option to support various workflows. Thoughtful and detail-oriented ergonomic design ensures a comfortable and user-friendly experience. Truly independent controls for each drawer allow for precise temperature and gas management, making the AD 3100 an ideal option for applications which require specific and varied conditions. An advanced digital control system maintains precise temperature and gas levels, which ensures optimal conditions for cell culture growth. Further environmental control is supported by an integrated laser-engraved water tray; this offers flexibility with the option to culture cells in either ambient or active humidity according to user requirements. The CUBE AD 3100 is suitable for a range of use cases including cell line growth, microbiological studies, and veterinary research. Its reliable and efficient incubation capabilities provide independent consistent and controlled environments for a wide range of laboratory needs.- Versatile Design: Combines four individual incubators in one compact unit, optimizing space and functionality.
- Humidity Options: Offers the ability to culture cells in either ambient or active humidity, facilitated by an integrated water tray.
- Independent Controls: Each drawer has its own controls for temperature and gas management, allowing for varied and specific conditions.
- User-Friendly Design: Features easy-grip knobs, useful latches, and robust hinges for a reliable and straightforward user experience.
- Wide Application Range: Suitable for cell line growth, microbiological studies, veterinary research, and other related research applications.
- Enhanced Safety: Equipped with alarm functions for temperature, CO2, and O2 levels, as well as overheat prevention for added security.
-
The EC10 Bench Top Incubator is the latest advanced iteration of ASTEC's incubator line. It offers improved capacity and temperature stability, as well as industry-leading gas recovery and consumption rates, while maintaining the independently controlled chambers the line is known for. A reengineered design allows easy access to the rear chambers, enhancing user convenience. Each chamber is equipped with a built-in gas mixer, and an optional VOC-absorbing filter can be connected to the circulation gas line for continuous filtering. The chambers are independently temperature-controlled for rapid temperature recovery. The bottom plate design securely holds various dish sizes (6 x 35 mm, 3 x 60 mm, and 2 x 4-well dishes) for maximum storage capacity and custom plates are available upon request. Each chamber also features a tempered glass observation window to enable users to check cultures without disturbing samples. For enhanced safety, the incubator includes an analog output and BMS (contact relay) for connectivity to external devices, allowing remote monitoring and alerts for any irregularities. Convenient sampling ports located at the front of the unit provide easy access without moving the incubator, and secondary temperature sensors in each chamber offer improved lab quality assurance and safety protocols by allowing daily temperature checks while dishes remain inside. Designed for space efficiency, the EC10 can be installed in stacks of up to three units using an exclusive stand, accommodating a total of 30 chambers. This design helps labs run more cycles without compromising operational integrity.- Improved Capacity: Enhanced storage capacity with 10 chambers, each holding 6 x 35 mm dishes, 3 x 60 mm dishes, and 2 x 4-well dishes.
- Independent Temperature Control: Each chamber independently maintains temperature with rapid recovery due to the built-in gas mixer.
- Observation Windows: Tempered glass windows allow for culture monitoring without disturbing samples.
- Safety Features: Includes an analog output and BMS for remote monitoring and alerting of irregularities.
- Convenient Access: Front sampling ports and secondary temperature sensors for easy access and improved quality assurance.
- Space Efficiency: Low-profile design allows stacking of up to three units with the exclusive stand, providing 30 chambers in one spot.
-
The ASTEC MN-2 MINI Bench Top Incubator is engineered to provide maximum flexibility with a minimal footprint. A compact desktop incubator, the MN-2 MINI is compatible with both dry and humidified incubation requirements, making it a versatile addition to any laboratory setting. For humid applications, water can be placed under the perforated plate, building humidity through natural evaporation up to 90%+. For dry applications, the MINI includes base plates to adjust to non-humidified cultures. This adaptability makes the MINI suitable as a primary culture incubator or as a standby unit for transferring cultures. The thermal environment in the MINI is optimally sheltered with a heated top and bottom, ensuring uniform temperature distribution. Each chamber is independently temperature-controlled and designed for optimal cell culture conditions. An observation window, inherited from the EC6S model, allows users to monitor cultures without disturbing the internal environment. An ergonomic latch securely seals the chamber, preventing any gas leakage that could compromise the culture. The MINI’s design also includes easy access and convenient sampling ports located at the front of the unit, allowing operators to reach samples without moving the incubator. Safety is a priority with the MN-2, which comes equipped with a standard alarm system for both temperature and gas flow. These alarms can be monitored redundantly through outputs at the back of the unit. Additionally, gas flow can be disabled when the incubator is not in use, conserving gas and reducing costs. The compact size and sophisticated design of the MN-2 make it an excellent choice for labs that require a flexible and reliable incubation solution.- Versatile Incubation: Supports both dry and humidified incubation with adjustable base plates and a perforated plate for humid applications.
- Optimal Thermal Environment: Heated top and bottom ensure uniform temperature distribution, with an observation window for non-disturbing culture monitoring.
- Secure Chamber: Ergonomic latch prevents gas leakage, maintaining a safe environment for cultures.
- Safety Alarms: Standard alarm system for temperature and gas flow with redundant monitoring capability.
- Gas Conservation: Large green button to shut off gas flow when not in use, conserving resources.
- Easy Access: Front sampling ports for convenient access without moving the incubator.
- Compact and Efficient: Small footprint maximizes lab space while providing reliable incubation performance.
-
ASTEC’s Penguin Series incubators are water-jacketed incubators which are designed to offer superior stability and precision in cell culturing. A water-jacketed chamber provides consistent temperature control by using a surrounding layer of water, which acts as a buffer against fluctuations and external temperature changes. This method ensures uniform heat distribution throughout the chamber, significantly reducing the risk of condensation and maintaining over 98% humidity without compromising the culture media's osmolarity. This series is available in 30-liter and 50-liter capacities, with infrared (IR) CO2 sensors. An additional galvanic battery O2 sensor for low-oxygen environments is also available. A compact design ensures the incubator occupies minimal space and consumes minimal energy while providing rapid gas and temperature recovery, especially with optional sub-divided inner doors made of either acrylic or stainless-steel framed glass. The Penguin AQ series also includes Grade A stainless steel shelves and trays, an access port, and stackable options to maximize lab space. Additional optional features include a space-saving cart and interior chamber air filters for optimal air quality. Sound design fundamentals and a variety of options to suit particular needs make the Penguin AQ series a reliable and efficient solution for diverse cell culture applications.- Compact and Efficient: Available in 30L and 50L capacities, designed to consume less space and energy with quick recovery times.
- Advanced Environmental Control: Water-jacketed chamber ensures over 98% humidity without condensation, maintaining consistent osmolarity and reducing media evaporation.
- Sensor Options: IR CO2 sensors, with an optional galvanic battery O2 sensor for low-oxygen conditions.
- Optional Sub-Divided Inner Doors: Available in acrylic or stainless-steel framed glass for improved temperature recovery and gas efficiency.
- Stackable and Mobile: Designed to be stackable with a space-saving cart option, optimizing lab space usage.
-
The ASTEC SD830 mini-Cube Single Drawer Incubator is designed to offer a versatile incubation solution that is both compact and expandable. The mini-Cube can be used for both dry and humidified culture, heated from the top and bottom to ensure a stable and well-protected environment within its chamber. The standard bottom plates for humidified incubation can achieve over 90% humidity in just three minutes. Optional bottom plates for dry incubation are also available. A new optional split chamber feature allows dishes for up to two samples to occupy the same drawer. This design enables users to access a desired dish in half of the chamber with minimal disturbance to the other half, maintaining separate identification in a compact space. The solid aluminum base drawer is removable, allowing it to be autoclaved for cleanliness and sterility independently of the rest of the incubator. The mini-Cube’s gas mixing system, located at the back of the unit, efficiently combines incoming gases to provide the necessary mixed levels for your culture, eliminating the need for premixed gas. The mini-Cube also offers front-located gas sampling ports for easy access. The unit is designed to maximize lab space, with the capability to stack up to three mini-Cubes in the same footprint as a 30L water-jacketed incubator.-
Versatile Incubation: Suitable for both dry and humidified incubation, with optional split chamber design for minimal disturbance.
Optimal Thermal Environment: Heated from the top and bottom, ensuring stable temperature maintenance.
Humidity Control: Standard bottom plates achieve over 90% humidity in three minutes; optional dry incubation plates available.
Efficient Gas Mixing: Integrated system for CO2 and N2 mixing, eliminating the need for premixed gases.
Easy to Clean: Autoclave-able aluminum drawer with curved corners for easy cleaning.
Space-Efficient Design: Stackable up to three units in the footprint of a 30L water-jacketed incubator.
Convenient Access: Front gas sampling ports for easy and quick access.
-
The ASTEC SMA-30DRS Direct Heat Incubator is the world's smallest dry heat sterilization incubator, designed to deliver reliable performance in a compact form factor. Despite their small size, these incubators are engineered to handle both basic and advanced research applications, making them ideal for labs with limited space and stringent quality requirements. The SMA-30DRS is part of a series available in 30, 80, and 165-liter models, all of which are stackable to maximize lab space. Equipped with advanced features, the SMA-30DRS offers infrared (IR) CO2 sensors, O2 control, and the option for dry heat sterilization. The incubator's direct heat system ensures uniform temperature distribution, reducing the risk of contamination due to condensation. Additional features include a HEPA filter within the chamber, an external sample port for gas testing, and access ports for running equipment like shakers or mixers inside the chamber. The incubator’s inner chamber is designed with rounded corners for easy cleaning, and it is available with either a full glass inner door or an optional stainless steel multi-level door. ASTEC’s commitment to energy efficiency and low consumption makes the SMA-30DRS suitable for sensitive applications, including regenerative medicine. The unit also supports external alarm and monitoring systems, to ensure dependable operation in demanding lab environments.- Compact and Space-Saving: Available in 30, 80, and 165-liter models, all stackable to maximize lab space, ideal for laboratories with limited room.
- Advanced Sensor Options: Equipped with infrared (IR) CO2 sensors and O2 control for precise environmental monitoring.
- Dry Heat Sterilization: Incorporates a dry heat sterilization option to maintain a clean and contamination-free environment.
- Energy Efficient: Designed for low energy consumption, suitable for sensitive applications like regenerative medicine where precise temperature and gas stability are critical.
- User-Friendly Design: Features include a HEPA filter, rounded chamber corners for easy cleaning, and an external sample port for testing gas levels without opening the chamber.
- Versatile Door Options: Choose between a full glass inner door or a stainless steel multi-level door, both designed for easy access and monitoring.
- External Monitoring: Supports external alarm and running condition monitoring systems.
-
The ASTEC SS250 Smart Station is designed to provide an incubator-like controlled environment to minimize stress on cells, and an ergonomic experience to minimize stress on the operator. Ideal for a variety of tasks including oocyte pick-up and embryo transfer, the Smart Station’s variety of configurable options are aimed at enhancing the quality of lab work by enhancing the user experience. The workstation's spacious, full-flat working surface is ideal for handling and observation; made of heated stainless steel with an integrated glass thermos-plate, the surface’s design allows culture dishes to slide smoothly, minimizing the risk of spillage. The height of the working surface is adjustable between 840 to 1090 mm. Circular arm openings, a large front window, and front-panel controls enable easy handling of equipment, and two side doors for facilitate access during daily operations like cleaning and disinfection. The Smart Station’s stand is motorized, and handlebars on each side ensure comfortable mobility. Large front door folds down for safe handling of loaded ET catheters, while side doors provide a convenient means of access for other laboratory consumables. An optional rear door is also available. A Utility Smart-Shelf on each side of the station increases usable space without compromising the main working area. The Smart Station integrates with most stereo microscopes available on the market, offering seamless optical and illumination compatibility, and its design includes an eyepoint adjuster and long tilting trinocular for superior usability. The Smart Station is available with optional height-adjustable microscope heads and long tilting eyepiece tubes, allowing users to further configure their workspace for maximum flexibility and comfort. Atmospheric purity is maintained by integrated HEPA and optional VOC filters to maintain optimal air quality. CO2 gas is supplied through a port located underneath the chamber, with adjustable gas concentration settings ranging from 0.0 to 10.0%. An optional bracket for a CO2 gas tank adds further convenience. These design elements allow for efficient and reliable cell manipulation and observation in a CO2-controlled environment. The SS250 Smart Station is a versatile addition to any laboratory. By replicating the natural conditions cells are accustomed to, the Smart Station helps prevent cellular stress. Customizable ergonomic features improve user comfort, freeing operators from everyday inconveniences so they can concentrate on their work.- Ergonomic Design: Circular arm openings, large front window, and side doors for easy access and comfort.
- Gas Supply: CO2 gas port located underneath the chamber with adjustable concentration settings from 0.0 to 10.0%.
- Adjustable Workspace: Motorized stand and optional height-adjustable microscope heads and tilting eyepiece tubes for flexible configurations.
- Convenient Access: Large front door folds down for handling catheters; side and optional rear doors for easy material transfer.
- Full-Flat Working Surface: Heated stainless steel with integrated glass thermo plate for smooth dish movement and minimal spillage risk.
- Microscope Integration: Compatible with most stereo microscopes available in the market.
- Utility Smart-Shelf: Increases usable space without compromising the main working area.
- RI Witness Compatibility: Accommodates the RI Witness ART Management System for enhanced quality control in IVF labs.
-
The BreDevice® HA-ICSI dish is a sterile, hyaluronic acid-coated culture dish specifically designed for the selection and separation of mature sperm during Intracytoplasmic Sperm Injection (ICSI) procedures. As a substitute for the PISCI dish, the BreDevice® HA-ICSI provides a reliable method for identifying and selecting viable sperm with intact DNA and optimal morphology. The dish features a solid hyaluronic acid pre-coating in the center, where mature sperm with the ability to bind to hyaluronic acid can be effectively captured. This selection process helps in isolating sperm that are more likely to produce successful fertilization outcomes, as immature sperm, which lack hyaluronic acid binding sites, cannot adhere to the coating. Key advantages of using the BreDevice® HA-ICSI dish include a reduction in chromatic abnormalities, improved sperm morphology, and a lower presence of immature nucleoprotein. Additionally, when used in combination with a sperm-hyaluronic acid binding assay kit, the BreDevice® HA-ICSI dish may significantly reduce pregnancy loss rates and improve clinical pregnancy rates (CPR). This product offers a practical and effective solution for laboratories seeking to enhance the outcomes of ICSI procedures by ensuring the selection of the highest quality sperm.1 dish / box
- Reduction in chromatic abnormalities by 4-6 times
- Improved sperm morphology
- Lower presence of immature nucleoprotein
- Higher volumes of CK-B and HspA2 in selected sperm
-
Fertitech Canada offers calibration services for ART equipment. We have considerable experience with devices from top manufacturers and an understanding the importance of precise, dependable equipment in labs. Our services ensure the accuracy of your devices, whether they are integral systems or supplementary sensors. We conduct thorough checks to confirm optimal operation and alignment with performance specifications. We aim to minimize disruption, offering flexible scheduling to suit our customers' timelines. With our calibration services, we aim to promptly optimize your lab equipment's operation without affecting your routine. -
The CARIAD Automated Staining Machine for Sperm Morphology Staining streamlines the process of sperm morphology assessment, providing valuable insights into the prognostic outcomes of spontaneous pregnancies, ART results, and the functional state of male reproductive organs. This machine is equipped with a single-layer Teflon-coated staining carousel that individually positions slides to prevent cross-contamination. It can simultaneously handle 16 slides and accommodates 10 reagent bottles with a capacity of 500 mL each. On average, reagent consumption is 2.5-3 mL per slide. Users can choose from up to 10 staining programs, including the three most common options: Pap, Modified Pap, and Diff-Quik Staining. The centrifugal speed is adjustable between 100-300 rpm, and results can be viewed on a 7-inch touch screen. For safety, a lid interlock mechanism that ensures secure operation. Maintenance is simplified with a built-in gradienter for balance detection, auto-checking of reagent levels at startup, and automatic cleaning upon shutdown. The machine offers a fully automated experience from startup checks and staining to centrifuging and self-cleaning. It delivers a high degree of customization, efficiently staining 16 slides concurrently using an injection mode that conserves reagents and eliminates the chance of cross-contamination. With preset parameters, it ensures consistent staining procedures across slides, aligning with IQC standards.Single unit
- Fully automated: From startup, staining, and centrifuging to self-cleaning
- High degree of customization: Completely replace the manual method
- 3 most-used sperm staining programs are built in (Pap, Modified Pap and Diff-Quik Staining)
- Efficient process: 16 slides can be stained at the same time
- Injection mode: Saves reagents and avoids cross-contamination
- Standardization: Staining procedures follow preset parameters, ensuring the consistency among slides and IQC
-
The CARIAD Sperm DNA Fragmentation Kit employs the Sperm Chromatin Diffusion (SCD) method to assess sperm DNA integrity, crucial for male fertility. Sperm DNA fragmentation (SDF) indicates the presence of sperm with damaged DNA, affecting fertility and reproductive outcomes. This kit is based on the observation that sperm with fragmented DNA do not show the typical halo of dispersed DNA loops seen in sperm with intact DNA, after acid denaturation and removal of nuclear proteins. Additionally, the SCD test can be utilized to evaluate sperm DNA longevity, revealing latent DNA damage not immediately apparent during initial assessments.20 tests/kit
- Contain dithiothreitol lysis solution and Wright staining solution
- Easy identification: sperm with fragmented DNA does not show a dispersion halo or the halo is minimal
- 20 tests/kit, stable for 12 months at 2-8℃
-
CARIAD Modified Papanicolaou Staining Solution is tailored for sperm morphology assessment in semen samples. Utilizing Hematoxylin, eosin, and light green stains, it offers an enhanced staining outcome. Compared to traditional PAP staining, this solution dramatically reduces staining time to just 10 minutes. It remains stable for 6 months when stored between 4-30℃ and retains its effectiveness for 3 months after opening.50mL x 3
- Faster staining than conventional PAP staining, requiring only 10 minutes
- Distinct morphological features after staining
- Stable for 12 months at room temperature
-
The CARIAD SEA-5 Seminal Plasma POCT Automated Chemistry Analyzer is an in vitro diagnostic biochemistry instrument tailored for the quantitative determination of Seminal Plasma biomarkers. Recognizing the importance of prompt results in seminal plasma analysis for diagnostic and fertility evaluations, the SEA-5 is designed to provide immediate outcomes. This eliminates the dependence on off-site laboratories and simplifies the process for Andrologists, doing away with intricate manual tests. The device accommodates cartridges that can assess up to five parameters simultaneously, and these cartridges are designed for single-use. Users can navigate the system through its 10-inch touch screen display, and results can be conveniently printed on-site via the built-in thermal printer.Single unit
- 5 parameters in 1 single-test cartridge
- 12 minutes for 5 parameters
- Sample volume: 5-20μL
- 3 steps operation
- Highly accurate results with CV ≤ 3%
- No user calibration necessary
-
The CARIAD Sperm Membrane Detection Kit (Hypotonic Dilation Method) facilitates the swift detection of sperm membrane function and vitality. Operating on the principle of the semi-permeability of an intact sperm membrane, this kit offers insights into the fertilization capability to a certain degree. Formulated with 1.35% fructose and 0.74% sodium citrate, it employs a method recommended by the WHO for accurate and reliable results.20 tests/kit
- WHO recommended method
- Ready to use, simple to operate, and easy to count
- Contain 1.35% fructose and 0.74% sodium citrate
-
CARIAD Sperm Nuclear Staining Solution (Acridine Orange Method) is specifically formulated for staining sperm nuclei and evaluating the presence of single-stranded DNA in damaged sperm chromatin. Endorsed as a recommended method by the WHO, this solution provides accurate insights into sperm chromatin integrity. When stored at 2-8℃, the solution remains stable and effective for up to 12 months.20 tests/kit
- Faster staining than conventional PAP staining, requiring only 10 minutes
- Distinct morphological features after staining
- Stable for 12 months at room temperature
-
CARIAD Sperm Staining Solution, based on the Diff-Quik Method, is designed for sperm morphology staining analysis. This staining solution facilitates the quantitative evaluation of both normal and abnormal sperm forms within an ejaculate. Incorporating eosinophilic xanthene and basophilic thiazine stains, it is particularly suitable for CASA (Computer-Assisted Sperm Analysis). With a shelf life of 12 months at room temperature, this method is endorsed by the WHO for swift semen staining procedures.3 x 100mL
- WHO recommended method
- Simple operation and fast results within 5 minutes, competitive when a rapid report is required
- Eosinophilic xanthene and basophilic thiazine stains
-
The CARIAD Sperm Vitality Staining Solution utilizes the eosin-nigrosin stain method for swift detection of sperm vitality. Dead sperm cells absorb the eosin, resulting in a red stain due to their altered membrane permeability. In contrast, live sperm with intact cell structures remain unstained. The nigrosin provides a black background, enhancing the distinction between live and dead sperm, making observations more straightforward. This ready-to-use solution offers a simple, one-step staining process.40 tests / kit
- WHO recommended method
- Ready to use, one-step staining technique
- Easy to evaluate with black background: dead sperm’s head is red, live sperm’s head is white or pink after staining
-
The CARIAD Staining Solution for the Maturity of Spermatozoan Nucleoprotein (Aniline Blue-Eosin Staining) is designed to evaluate sperm maturity. Through the staining of sperm nucleoprotein, it aids in assessing the occurrence of nucleoprotein transition. Upon application, immature sperm heads are distinctly colored blue, while mature sperm heads appear red, simplifying evaluations. Aniline blue serves as a standard test to determine chromatin condensation in sperm DNA. The solution remains stable for up to 12 months when stored at 2-8℃, and maintains its efficacy for 15 days at 2-8℃ after being opened.40 tests/kit
- WHO-recommended method
- Aniline blue and eosin Y stains
- Easy to evaluate: immature sperm head is blue and mature sperm head is red after staining
- Stable for 12 months at 2-8℃ and 15 days at 2-8°C after opening
-
The CBS Digitcool® series provides a versatile array of controlled-rate freezers catering to diverse cryopreservation requirements. The line includes:- Digitcool®: A robust solution for large cryopreservation centers, accommodating high-security straws, cryogenic vials, glass ampoules, and blood bags, with custom rack options available.
- Mini-Digitcool®: Tailored for users with moderate freezing needs, such as tissue banks and cellular therapy centers, it supports a variety of storage formats including straws, tubes, and bags.
- Micro-Digitcool®: A compact freezer preferred by tissue and cord blood banks, cellular culture facilities, and clinical trials, offering efficient storage for straws, tubes, and bags.
- Nano-Digitcool®: Designed for daily use in Assisted Reproductive Technology centers, this compact freezer is ideal for smaller-scale, yet critical, cryopreservation needs. Each unit in the Digitcool® line is meticulously crafted to ensure reliability, consistency, and performance for the critical task of biological sample preservation.
Single unit
-
Cryo Bio System™ (CBS) Goblets and Visotubes maximize your cryotank’s limited space by offering a unique spatial and colour-coded organization system for storing biological samples.5 goblets/pkg or 10 visotubes/pkg
- Goblets and Visotubes come in a variety of colours, shapes and sizes, allowing for easy sample identification
- Goblets hold 12 Visotubes and can hold a maximum of 168 CBS High Security Vitrification Straws, or 240 CBS High Security 0.3 ml or 0.5 ml Straws
-
The CBS™ High Security Sperm Straw with braided plug is designed for the cryopreservation of human sperm. Made from a transparent ionomeric resin that is biocompatible and chemically inert, the straw’s high surface to volume ratio provides improved and homogenous heat exchange over the total volume of the straw. Available in two sizes, High Security Sperm Straws are designed for use with SYMS-type sealers. This fully closed vitrification system eliminates any possibility of cross-contamination to the specimen or its environment.20 or 100 straws (packaged in blisters of 5)
- High security closed system vitrification device
- CBS™ 0.3 ml straw features two compartments separated by a white plug: 1) compartment containing semen with a capacity of 0.3 ml, and 2) compartment that accommodates the coloured identification rod and is used for holding when handling liquid nitrogen
- CBS™ 0.5 ml straw features the same technical specifications as the 0.3 ml straw, but has a capacity of 0.5 ml and boasts a coloured external plug surface
- For large-scale application (for example, sperm banks), straws are filled with PACE, MAPI or DIVA automated filling and sealing machines
- Sealing straws with a CBS SYMS sealer ensures an impervious and high security seal
- Leak-proof and shatter-proof, guaranteed all the way down to LN2 temperatures
- Mechanically resistant to pressures of up to 150 kg/cm2 and indestructible under normal conditions of use
- Compatible with all nitrogen freezers and containers, both liquid and vapor phase as well as ultra-low temperature mechanical freezers
- Requires a sterile filling nozzle and a micro-aspirator or a syringe equipped with a special connector are used to manually fill straws
- CE-marked medical device and FDA 510 (k) approved
-
The CBS™ High Security Embryo and Sperm Straw with braided plug is designed for the long-term cryopreservation of human sperm and embryos. Made from a transparent ionomeric resin that is biocompatible and chemically inert, these high-quality straws have a high surface to volume ratio for improved and homogenous heat exchange over the total volume of the straw. The fully closed vitrification system eliminates any possibility of cross-contamination to the specimen or its environment.20 straws (4 packs of 5 blisters each)
- High security closed system vitrification device
- Straws have two distinct compartments separated by the braided plug that allows for controlled loading and extracting
- Tamper-proof top compartment for placement of a coloured identification rod to guarantee sample traceability
- Leak-proof and shatter-proof, guaranteed all the way down to LN2 temperatures
- Mechanically resistant to pressures of up to 150 kg/cm2 and indestructible under normal conditions of use
- Sealing straws with a CBS™ SYMS sealer assures an impervious and high security seal
- Compatible with all nitrogen freezers and containers, both liquid and vapor phase as well as ultra-low temperature mechanical freezers
- Requires a sterile filling nozzle and a micro-aspirator or a syringe equipped with a special connector are used to manually fill straws
- CE-marked medical device and FDA 510 (k) approved
-
CBS™ High Security Tubes are a unique fully secured system for storage of biological materials in liquid nitrogen. Once sealed, the tube eliminates any concerns related to cross-contamination and sample degradation from oxidation and evaporation. The High Security resin material is compatible with cryogenic storage temperatures from -80°C to LN2. The tubes are designed to function with the CBS™ SYMS III Sealer.20 sterile tubes
- High security closed system vitrification device
- Ideal for the cryopreservation of biological samples: biobanking; preservation of fertility (ovarian and testicular tissue, and sperm); biological tissue for clinical phase or research; biological samples for blood banks and blood transfusion centers; cell and genetic therapy (clinical phase and therapeutic applications); and the packaging of vaccines and heat-sensitive drugs
- Validated as leak-proof and shatter-proof in all cryogenic temperatures including temperatures as low as LN2 liquid phase
- Indestructible under normal conditions of use
- Traceable with coloured inserts, 2D data matrix coded inserts, and compatible with cryoresistant labels
- Compatible with cryogenic storage temperatures from -80°C to LN2
- Compatible with common storage systems, manual and automatic filling systems, programmable freezers and liquid nitrogen, vapor phase and mechanical freezers
- CE-marked medical device with Class II/a certification, appropriate for clinical phase trials and therapeutic applications
-
CBS™ High Security Vitrification (HSV) Straws are designed for the vitrification of human oocytes and embryos (all stages). The straw is made from transparent biocompatible ionomeric resin, making it secure, durable, and simple to use. The physical properties and method of sealing HSV straws guarantees that they remain sealed when immersed and stored in liquid nitrogen. The fully closed vitrification system eliminates any possibility of cross-contamination.4 individual peel-off blisters / pack
- High security closed system vitrification device
- Composed of three distinct parts: a High Security ultra-thin outer straw, featuring a pre-sealed weighted end and flared opening; a capillary tube with pre-formed, fully clear gutter co-injected with its coloured identification rod; and a blue introduction device
- One-step opening and retrieval
- Designed for use with CBS™ SYMS Sealers for perfect sealing, and fully compatible with CBS™ storage products
- Packaging designed to provide a "double sterile barrier", facilitating transfers into aseptic working areas
- Compatible with all nitrogen freezers and containers, both liquid and vapor phase, as well as ultra-low temperature mechanical freezers
- International Standards Compliance CE, FDA 510 (k) cleared
-
CBS™ ID Jackets are designed for use with CBS™ 0.5 ml High Security Sperm Straws. These external identification sleeves can be identified with the application of a custom label or written on directly with a cryo-safe marker. ID Jackets become secure once the straw is sealed for reliable tracking of straws in long-term storage.50 jackets / pkg
-
The CBS™ Micro-aspirator device is used for manually filling straws during cryopreservation. It eliminates the risk of contamination and is compatible with all CBS™ straws.Single device
- Eliminates risk of contamination while filling straws
- Compatible with all CBS™ straws
- No specific maintenance required
-
The Cryo Bio System™ (CBS) SYMS I Sealer is a tabletop device specifically designed to seal CBS High Security straws. Crafted with ionomeric resin, this sealer is highly reliable and durable, requiring minimal maintenance and ensuring optimal operation in the long run. The SYMS I can effectively seal 0.3 ml and 0.5 ml CBS High Security straws, as well as CBS High Security Vitrification straws. These straws are integral components of the CBS closed cryopreservation system, and the SYMS I Sealer ensures a secure seal, contributing to the system's overall safety and effectiveness. The sealer provides users with flexibility in operation, as it can be activated by either a push-button or a foot switch, depending on the user's preference. This user-friendly functionality makes the SYMS I Sealer a valuable asset in laboratories and facilities that use the CBS cryopreservation system.Single unit
- Two options to best suit your workflow: push-button or foot switch
- Requires only 5 minutes per day for start-up, maintenance, and shut-down procedures
- Easily cleaned with ethanol or a non-corrosive decontaminant fluid
-
The Cryo Bio System™ (CBS) SYMS III Sealer is a bench top unit designed to thermally seal all CBS™ High Security products, including CBS™ High Security 0.3 ml, 0.5 ml and 2 ml straws, CBS™ High Security Tubes, and CBS™ High Security Vitrification straws. Using an automatic detection system, the unit uses pre-set specific combinations of seal temperatures, time and jaw positions for each CBS device. Due to its compact size, the SYMS III can be used in a variety of locations, including on the lab bench, under laminar flow, or even in field operations.Single unit
- Multilingual interface (French, English, Spanish and Chinese) + 4 optional languages
- Laboratory glove-compatible colour touch screen
- Machine cycle display: pre-heating, ready status and sealing in progress
- Two sealing modes: automatic detection or operator-controlled via the touch screen
- Fault signal with messages and alarms
- Display and tracking of maintenance modes
- Easy to clean and service
-
CBS™ Weighted ID Rods are designed for use with CBS™ 0.3 ml High Security Sperm Straws. Thee rods provide internal colour-coding for easy sample identification, and are weighted to prevent filled straws from floating when immersed in liquid nitrogen.10 rods / pkg
-
CELL-VU® Pre-stained Morphology slides provide clean and clear slides for rapid cellular visualization and differential cell assessment. Each slide contains a dried layer of stain that facilitates morphology assessment when in contact with cells. Samples are applied directly to the slide and a coverslip placed over the sample, reducing exposure to harmful external variables. CELL-VU® slides combine conventional microscope slides with a proprietary combination of methylene blue and cresyl violet stains into a single, ready-to-use device.75 slides/box
- Used for the staining spermatozoa, blood, CSF, and urine for cytology
- Disposable, reducing clinician’s unnecessary exposure to bodily fluids
- One step process limits exposure to reagents and potentially harmful stains
- Highly accurate results
- Increases lab effectiveness by eliminating the need for cleaning
- Used for World Health Organization and Kruger strict morphology sperm assessment from undiluted semen
-
CellVision® slides are manufactured from cleaned coated non-toxic glass. Each disposable slide comes with or without an etched grid, has 2 or 4 separate counting chambers, as well as a fixed coverslip with 100 microns’ depth. The combination of specific chamber-depths and several built-in grid formats facilitate sperm motility assessments and contribute to accurate and reproducible semen analysis. Suitable for a variety of different human and veterinary applications, CellVision® slides eliminate time-consuming cleaning procedures and reduce the risk of exposure to infectious material.25 slides / box
- Disposable
- Made from cleaned and coated non-toxic glass
- Available in 2 and 4 chambers formats with 10 to 100 μm fixed-depth coverslips
- Colour-coded by format
- Slides come with an identical image, dimensions and fitted counting grid as a re-usable hematocytometer
- For use in human and veterinary semen analysis
-
CellVision® slides are manufactured from cleaned coated non-toxic glass. Each disposable slide comes with or without an etched grid, has 2 or 4 separate counting chambers, as well as a fixed coverslip with 10, 12, 20 or 100 microns’ depth. The combination of specific chamber-depths and several built-in grid formats facilitate sperm motility assessments and contribute to accurate and reproducible semen analysis. Suitable for a variety of different human and veterinary applications, CellVision® slides eliminate time-consuming cleaning procedures and reduce the risk of exposure to infectious material.25 slides / box
- Disposable
- Made from cleaned and coated non-toxic glass
- Colour-coded by format
- Slides come with an identical image, dimensions and fitted counting grid as a re-usable hematocytometer
- For use in human and veterinary semen analysis
-
CellVision® slides are manufactured from cleaned coated non-toxic glass. Each disposable slide comes with or without an etched grid, has 2 or 4 separate counting chambers, as well as a fixed coverslip with 20 microns’ depth. The combination of specific chamber-depths and several built-in grid formats facilitate sperm motility assessments and contribute to accurate and reproducible semen analysis. Suitable for a variety of different human and veterinary applications, CellVision® slides eliminate time-consuming cleaning procedures and reduce the risk of exposure to infectious material.25 slides / box
- Disposable
- Made from cleaned and coated non-toxic glass
- Colour-coded by format
- Slides come with an identical image, dimensions and fitted counting grid as a re-usable hematocytometer
- For use in human and veterinary semen analysis
-
The ColdStash VitroStash 47L Dewar is an innovative storage solution developed to optimize capacity in laboratory settings. The VitroStash is equipped with twelve stacked canisters, which effectively doubles the storage capacity when compared to traditional canister systems. Created specifically for IVF clinics, the VitroStash system accommodates up to 384 patients without necessitating any operational changes in the lab. The VitroStash system not only aids in addressing storage limitations but also reduces costs by eliminating the need for additional Dewars, alarms, monitors, and by lowering LN2 consumption. Thus, it serves as an economical and user-friendly solution for labs.Single unit
- A dewar retrofit with VitroStash will cost about half of a new dewar.
- VitroStash increases current storage capacities by 2X.
- No need to change current lab configurations.
- Enhanced grid configuration allows for simple, ergonomic storage.
- Fewer dewars further reduces energy and LN2 costs.
-
The VitroStash Max Dewar is a 95-liter high-capacity storage solution for laboratories, delivering a significant increase in storage capability while maintaining operational efficiency. This model comes equipped with twelve VitroStash stacked canisters, canes, and goblets, all designed for maximized storage density. The VitroStash Max Dewar stands out for its economic benefits, notably reducing per patient storage and operating costs compared to large LN2 freezers. It is engineered for lower liquid nitrogen and energy usage, contributing to sustainable operation. Enhancing lab safety, it minimizes alarm occurrences, thus reducing potential risks and demands on staff. With its ample storage capacity, compact footprint, and cost-saving features, the VitroStash Max Dewar offers an effective storage solution for labs.Single unit
- Made of high-strength aluminum alloy
- Advanced powder coat finish for increased durability
- A locked-lid switch for safety of preserved sample is optional
- Service life is five years
- Temperature and Liquid Level monitor available
-
Fertitech Canada's consultation services leverage our substantial expertise in the ART and IVF fields to provide your clinic with crucial insights. We can guide you through any stage of laboratory development, from new lab design and procurement for a new clinic to the integration of advanced technologies in an existing facility. We can address both immediate and long-term needs to support sustainable lab management. Our goal is to assist you in making informed decisions for your clinic's development and growth, leveraging our experience and industry knowledge. -
Dewin’s BXGuard Pipettes are specialized biopsy pipettes featuring a narrowed inner diameter, designed for extracting biopsiable cells from embryos. They boast a unique "isthmus" within the functional section's inner cavity, which enhances the safety and efficacy of biopsies by potentially reducing or eliminating the need for lasers. This design simplifies the biopsy process, shortens the learning curve for practitioners, and helps to prevent the loss of cells.10 pipettes / box
- Narrowed "isthmus" design for precise cell biopsy from embryos.
- Aims to reduce or eliminate laser use, increasing the safety and simplicity of biopsies.
- Contributes to a shorter learning curve and minimizes the risk of cell loss.
-
Dewin's Flickmate Pipettes are flat-opening holding pipettes designed for the immobilization of embryos during embryo biopsy, featuring a unique sloping surface at the upper part that intersects with the oocyte-holding surface to facilitate efficient immobilization. This design aims to increase the success rate of single biopsies by reducing the necessity for laser cutting, thereby minimizing the risk of chimera formation.10 pipettes / box
- Sloping surface design for efficient embryo immobilization during biopsy procedures.
- Eliminates the need for laser cutting, reducing chimera formation risk.
-
Embryotech Laboratories provide cryopreserved mouse embryos and hamster ova, with a simple one-step thawing process. These high-quality embryos and ova can be used for a wide variety of projects and applications such as research models, measuring quality control testing (Mouse Embryo Assay), embryo manipulation training and more. All embryos are shipped using a dry liquid nitrogen vapor shipper, and include a Thaw Alert™ straw to monitor temperature during transport. Due to the coordination and timing involved in shipping Embryotech products, they are available by special order only. For more information, or to place an order, please contact us directly.10 or 20 per straw
- Multiple mouse gametes available: Embryos at stages 1-Cell, 2-Cell, 4-Cell, 8-Cell or Blastocyst, and single sperm straws
- Hamster ova available in straws of 10
- All shipments include a Thaw Alert™ Straw to monitor shipper temperature, ensuring the quality of each and every order
- Produced in an ISO-17025 accredited test laboratory, with Good Laboratory Practice for Nonclinical Laboratory Studies accreditation
- Product thawing and dry shipper instructions included
-
Fertitech Canada provides installation services for ART equipment. Our team's extensive experience allows us to effectively handle installations in both new and established clinics. Our services are tailored to each clinic's unique needs. We recognize the delicate nature of ART equipment and ensure timely and careful transport and delivery for installation. With a track record of successfully installing equipment from various leading suppliers in a variety of clinics and labs across Canada, Fertitech Canada is well-positioned to meet your installation needs. -
The ESCO Medical CultureCoin® is a single-use, gamma-sterilized IVF culture dish, designed for use with the MIRI® TL, ESCO Medical's time-lapse incubator. The MIRI® TL's state-of-the-art technology captures real-time images of developing embryos, providing a continuous view in the form of time-lapse videos. The CultureCoin® facilitates the MIRI® TL’s capture of images, as each of the 14 wells on the coin has a 300µm optically clear area for optimal microscopy. The CultureCoin® features an ergonomic layout, which ensures the secure and effective handling of embryos, and oxygen plasma-treated surfaces, which are designed to prevent bubble formation. Each culture well also includes two wash wells for cell manipulation, washing, or replacing culture media, and a pH reservoir to allow spot pH measurement without interaction with any cultured samples.25 dishes/box
- 14 numbered wells for easy location and tracking by the user. Each well also includes two washing wells for cell manipulations and media changes.
- Mounted lid ensures complete coverage of the culture area for added security.
- A specially designed area for pH measurement that doesn't disturb the cultured samples.
- Flat bottom design is ideal for facilitating heat transfer from below, enhancing the culture environment.
- Gamma-sterilized
-
The ESCO Airstream Laminar Flow Air Flow Cabinet is an excellent choice for clinics and labs which require a sterile workspace with a constant filtered airflow. These benches provide a sterile environment ideal for medical and laboratory applications, as purified air travels across the working zone of the cabinet in a vertical, unidirectional stream. Airstream benches offer a high level of protection for both samples and users, ensuring the aseptic and particle-free conditions that are necessary for safe work with samples in open dishes. This vertical laminar flow workstation provides sample protection with ULPA filtration, which is 10x as efficient as HEPA filtration and creates an ISO Class 3 work zone. The laminar flow bench is highly efficient, incorporating the latest generation of DC ECM motors, and is able to maintain a stable airflow despite voltage fluctuations. This stable airflow eliminates turbulence and the possibility of dead corners in the work zone. In addition to its filtration capabilities, the ESCO Airstream Laminar Flow Bench also offers a comfortable low noise level of 52dBA* (LVG-4A in open field condition). The ESCO Airstream Laminar Flow Air Flow Cabinet has been tested for cross-contamination and product protection using a microbiological test method adopted from EN12469. The laminar flow bench also features an ISOCIDE™ Powder Coat (silver-impregnated), which inhibits microbial growth, improving safety. Each clean bench is individually factory tested for safety and performance in accordance with international standards.Single unit
- AISOCIDETM powder coat (silver-impregnated) inhibits microbial growth to improve safety
- Low-noise with energy-efficient ECM blowers
- ULPA (ultra low particulate air) filtration is 10x more efficient than HEPA filtration and creates an ISO class 3 work zone
- ULPA Main Filter (99.9995% efficiency for the removal of 0.12 µm diameter or larger PM)
- Improved safety with airflow sensors that monitor airflow in real-time and alerts users of insufficient airflow
-
The ESCO Airstream® NS G4 Class II Type A2 Biological Safety Cabinet is an NSF-certified unit equipped with the Centurion Touchscreen controller. Designed for laboratory use, the cabinet features dimmable LED illumination and a raised, stainless-steel armrest for user comfort. Two model variants are available: the S-Series has stainless steel side walls with side capture zones and a single-piece work tray that is designed to retain spills, while the E-Series comes with tempered glass side walls and a multi-piece, autoclavable work tray. Each variant is available in three-, four-, five-, and six-foot configurations. Both models provide filtration efficiency that is 10 times higher than standard HEPA filters, establishing an ISO Class 3 work zone instead of the more common ISO Class 5. Despite this increased efficiency, the filter has a lifespan of 10 years, with replacement costs equivalent to HEPA filters. The cabinet's design prioritizes safety, while also considering space constraints in laboratory settings. The Centurion Touchscreen Controller adds a layer of operational clarity for users.Single unit
- Centurion Touchscreen Controller: Provides a clear 3D BSC diagram displaying safety information and cabinet alarms, includes details on alarm types and intervention instructions, angled for ease of viewing, and offers a Quickstart mode for rapid operation.
- Lighting: Features dimmable LED lights with adjustable work zone brightness, producing a light intensity of 1200 lux, contributing to energy efficiency.
- Ergonomic Design: Comes with an 8” sash opening, and the frame is constructed of shatterproof, UV-absorbing tempered glass. It also includes support beams to reduce vibration and a holder for easier drain pan cleaning.
- Connectivity: Equipped with a USB port for data log access and BMS connectivity. Also integrates a Remote Modbus feature for remote secure access from external devices.
- Cabinet Variants: S-Series: Features stainless steel side walls with negative pressure for containment and a single-piece spill-retaining work tray, or E-Series: Designed with tempered glass side walls for increased visibility and a multi-piece, autoclavable work tray.
- Energy Efficiency: Incorporates an energy-efficient DC ECM for up to 70% energy savings compared to AC motors. The cabinet has a standby mode and an overall low energy consumption.
- ULPA Filter: Offers filtration efficiency ten times greater than HEPA filters, creating an ISO Class 3 work zone. This filter maintains a lifespan of 10 years with comparable replacement costs to HEPA filters.
- Isocide™ Coating: An antimicrobial powder coating on the cabinet surfaces that can eliminate 99.9% of surface bacteria within a 24-hour period.
-
The CelCulture® CO₂ Incubator is equipped with a range of advanced features, including rapid temperature and gas recovery, ISO Class 5 cleanliness, an ISOCIDE™ antimicrobial coating, and an inner door kit that reduces the risk of contamination. Designed to create an environment that mimics the natural conditions required for the development of embryos, the incubator is able to maintain low levels of oxygen. This is achieved through the use of sophisticated firmware and precision sensors that monitor and regulate the temperature, CO2, and O2 levels within the chamber. The inner door kit further enhances the incubator's performance by facilitating fast parameter recovery and reducing the risk of contamination, with each section of the incubator featuring a dedicated door panel. Available in CO2+O2 control, or CO2-only control.Single unit
- Advanced IR CO2 Sensor
- Advanced, new-generation Zirconia O2 Sensor
- Integrated gas mixer; CO2 and O2 Control
- Extremely reliable and easy-to-use
- Fast Temperature and Gas Recover
- Optional integrated SafeSENS pH System
-
ESCO’s Multi-Zone ART Workstations feature a vertical laminar flow and are equipped with multiple heating zones which provide temperature control throughout the work surface. The ten distinct zones, each with its own heating elements and sensors, automatically prioritize power distribution and provide the user with precise temperature regulation and rapid recovery. Four different temperature modes allow activating and deactivating different zones, simplifying vitrification cooling and warming procedures. These workstations are available in a variety of sizes and configurations to meet different requirements, with options including built-in microscopes and integrated MIRI® chambers. These workstations provide digital control of premixed gas, allowing for precise sample environmental control. An ULPA filtration system ensures clean airflow, filtering particles 10 times smaller than those caught by HEPA filters. The workstation's humidification system and positive pressure work environment ensure that your samples remain safe and uncontaminated. These workstations come equipped with a fully functional integrated touchscreen Windows PC interface that displays real-time information on all work area parameters, including zone temperature performance, gas pressure, and flow rate. The touchscreen interface is easy to use and allows for seamless temperature monitoring and control. With the variety of size and option configurations available, there is sure to be an ESCO IVF Heated Multi-Zone Workstations that fits your needs for safety, reliability, and accuracy.Single unit
- Available in 4 or 6 foot configurations
- Multi-Zone temperature control with Vitrification Mode
- Integrated, fully functional Windows touchscreen PCs
- ULPA Main Filter (99.9995% efficiency for the removal of 0.12 µm diameter or larger PM)
- Integrated humidification system using pre-mixed gas
- Optional tabletop built-in gassed and heated MIRI Chambers
- Quietest hood on the market
-
The Mini MIRI® Dry incubator is a compact and affordable solution for IVF laboratories that prioritize space and cost-effectiveness. With its two-chamber design, it is modeled after the classic MIRI® Multiroom incubator. This dry IVF bench top incubator is unique in that it can recirculate gas within the incubator, and is compatible with a HEPA/VOC filtration system, which is not typical of other humidified IVF incubators. The gas, whether pure N2 and CO2 or premixed, first flows through the tri-gas mixing chamber, where the user sets the desired CO2 and O2 gas concentrations. The gas then passes through the HEPA/VOC filter before entering the incubator chambers. Afterward, the gas undergoes sterilization using UV light (254nm) before returning to the tri-gas mixing chamber and recirculating within the system. This design ensures minimal gas consumption even with lid openings and maintains the recirculating air's cleanliness and safety for the embryo samples.Single unit
- 2 individually-controlled chambers
- Integrated gas mixer; CO2 and O2 Control
- External Validation Ports for Gas and Temperature
- Datalogging Software Included
- Optional integrated SafeSENS pH System
-
The Mini MIRI® Humidity Incubator is a compact and reliable humidified mini bench top incubator that is based on the robust MIRI® design. Its direct heat regulation and compact design prevent vapor condensation and contribute to faster temperature and gas recovery. This humidified incubator uses either premixed gases or pure gas (N2 and CO2) inserts that pass through a tri-gas mixing chamber, ensuring precise gas concentrations before entering the incubator chambers. The gas then recirculates and goes through the gas mixing chamber again, minimizing gas consumption.Single unit
- 2 individually-controlled chambers
- Integrated gas mixer; CO2 and O2 Control
- External Validation Ports for Gas and Temperature
- Datalogging Software Included
- Optional integrated SafeSENS pH System
-
The Esco MIRI® II-12 Multiroom Incubator is a top-of-the-line solution for IVF laboratories, able to meet exacting standards of performance and validation. The incubator features 12 chambers and 24 independent PID temperature controllers to ensure minimum environmental stress for embryos. Each compartment is separate and does not affect the temperature of other chambers. The lid temperature and the temperature in the culture chambers can be regulated and controlled separately, with PET layers separating the top and bottom of each compartment. And because it includes a separate PT-1000 sensor for each compartment, the MIRI® II-12 incubator can accurately monitor and control the temperature of each chamber individually, ensuring optimal conditions for embryo development. The circuitry for the PT-1000 sensors is separated from the unit's electronics, so it remains a genuinely independent validation system. The MIRI® II-12 incubator uses pure CO2 and N2 gases, allowing for precise control of CO2 and O2 concentrations in each chamber. The incubator features a recirculated gas system that ensures quick and complete gas replacement in less than five minutes, with gas cleaned by a 254 nm UVC light with filters to prevent dangerous ozone production. The incubator also has a complete gas control system, including pressure regulators, gas flow sensors, gas pressure sensors, and gas filters. The incubator's software runs on a built-in touchscreen and includes logging functions for long-term data storage, as well as a USB module for off-site evaluation of quality control data. The incubator also includes a pH sensor port, allowing users to measure the pH of samples at any time.Single unit
- 12 individually-controlled chambers
- real-time datalogging touchscreen
- Integrated gas mixer; CO2 and O2 Control
- Extremely reliable and easy-to-use
- Optional integrated SafeSENS pH System
-
The Esco MIRI® Multiroom incubator is an excellent choice for safeguarding embryos in your IVF laboratory. Its six (6) separate chambers not only provide embryologists with a larger capacity to accommodate more embryos but also ensure that environmental conditions are maintained even when adjacent chambers are accessed. The incubator offers the best temperature recovery, accuracy, and uniformity in the IVF market, thanks to its heated lid design. This design guarantees that the temperature provided to your embryos is not solely sourced from the dish's bottom but also delivered from the top, maintaining a set point of 37.2C to ensure a consistent temperature of 37.0C for your samples. The Esco MIRI® Multiroom incubator provides the choice to use pure N2 and CO2 gases, which are more affordable than premixed gases. It recirculates these gas inserts, giving you the best value for your money. This feature also offers you the flexibility to adjust your gas concentration as needed to optimize embryo culture protocols in your laboratory. Additionally, the MIRI® Multiroom is compatible with the most commonly used brands of culture dishes in the market.UNIT
- 6 individually-controlled chambers
- Integrated gas mixer; CO2 and O2 Control
- Extremely reliable and easy-to-use
- Best-priced incubator on the market
- Optional integrated SafeSENS pH System
- Optional Stacking Frame for 2 units
