10 / box
- Echogenic tip enhances visualization under ultrasound
- Silicone bung for a tight fit and oocyte safety during collection
- Non-coring needle
- Luer lock connector
- Ergonomic handle for comfort and control
- 100 cm aspiration line
-
The ACE Single Lumen Ovum Pickup Needle (OPU) by Allwin® is used for laparoscopic or ultrasound-guided transvaginal oocyte retrieval. Designed with an ergonomic handle and highly echogenic tip, the ACE Single Lumen OPU Needle ensures comfort and clear visualization during procedures. Needles are 35cm in length and are available in 16, or 17 gauge. -
The EAGLE Single Lumen Ovum Pickup Needle (OPU) by Allwin® is used for laparoscopic or ultrasound-guided transvaginal oocyte retrieval. Designed with an ergonomic handle and highly echogenic tip, the ACE Single Lumen OPU Needle ensures comfort and clear visualization during procedures. Needles are 35cm in length and are available in 17 gauge.10 / box
- Echogenic tip enhances visualization under ultrasound
- Silicone bung for a tight fit and oocyte safety during collection
- Non-coring needle
- Luer lock connector
- Ergonomic handle for comfort and control
- 100 cm aspiration line
-
Allwin®’s Ovumpick Double Lumen Ovum Pickup Needle (OPU) is used for laparoscopic or ultrasound-guided transvaginal oocyte retrieval. Featuring an ergonomic handle and highly echogenic tip, the Double Lumen OPU Needle provides clear visualizing while ensuring user comfort during procedures. The Ovumpick’s outer lumen allows for flushing of follicles during the procedure. Needles are 35 cm in length and are available in 16 or 17 gauge.10 / box
- Echogenic tip enhances visualization under ultrasound
- Silicone bung for a tight fit and oocyte safety during collection
- Non-coring needle
- Luer lock connector
- Ergonomic handle for comfort and control
- Outer lumen allows for flushing of follicles
-
CBS™ High Security Vitrification (HSV) Straws are designed for the vitrification of human oocytes and embryos (all stages). The straw is made from transparent biocompatible ionomeric resin, making it secure, durable, and simple to use. The physical properties and method of sealing HSV straws guarantees that they remain sealed when immersed and stored in liquid nitrogen. The fully closed vitrification system eliminates any possibility of cross-contamination.4 individual peel-off blisters / pack
- High security closed system vitrification device
- Composed of three distinct parts: a High Security ultra-thin outer straw, featuring a pre-sealed weighted end and flared opening; a capillary tube with pre-formed, fully clear gutter co-injected with its coloured identification rod; and a blue introduction device
- One-step opening and retrieval
- Designed for use with CBS™ SYMS Sealers for perfect sealing, and fully compatible with CBS™ storage products
- Packaging designed to provide a "double sterile barrier", facilitating transfers into aseptic working areas
- Compatible with all nitrogen freezers and containers, both liquid and vapor phase, as well as ultra-low temperature mechanical freezers
- International Standards Compliance CE, FDA 510 (k) cleared
-
Embryotech Laboratories provide cryopreserved mouse embryos and hamster ova, with a simple one-step thawing process. These high-quality embryos and ova can be used for a wide variety of projects and applications such as research models, measuring quality control testing (Mouse Embryo Assay), embryo manipulation training and more. All embryos are shipped using a dry liquid nitrogen vapor shipper, and include a Thaw Alert™ straw to monitor temperature during transport. Due to the coordination and timing involved in shipping Embryotech products, they are available by special order only. For more information, or to place an order, please contact us directly.10 or 20 per straw
- Multiple mouse gametes available: Embryos at stages 1-Cell, 2-Cell, 4-Cell, 8-Cell or Blastocyst, and single sperm straws
- Hamster ova available in straws of 10
- All shipments include a Thaw Alert™ Straw to monitor shipper temperature, ensuring the quality of each and every order
- Produced in an ISO-17025 accredited test laboratory, with Good Laboratory Practice for Nonclinical Laboratory Studies accreditation
- Product thawing and dry shipper instructions included
-
The ESCO Airstream Laminar Flow Air Flow Cabinet is an excellent choice for clinics and labs which require a sterile workspace with a constant filtered airflow. These benches provide a sterile environment ideal for medical and laboratory applications, as purified air travels across the working zone of the cabinet in a vertical, unidirectional stream. Airstream benches offer a high level of protection for both samples and users, ensuring the aseptic and particle-free conditions that are necessary for safe work with samples in open dishes. This vertical laminar flow workstation provides sample protection with ULPA filtration, which is 10x as efficient as HEPA filtration and creates an ISO Class 3 work zone. The laminar flow bench is highly efficient, incorporating the latest generation of DC ECM motors, and is able to maintain a stable airflow despite voltage fluctuations. This stable airflow eliminates turbulence and the possibility of dead corners in the work zone. In addition to its filtration capabilities, the ESCO Airstream Laminar Flow Bench also offers a comfortable low noise level of 52dBA* (LVG-4A in open field condition). The ESCO Airstream Laminar Flow Air Flow Cabinet has been tested for cross-contamination and product protection using a microbiological test method adopted from EN12469. The laminar flow bench also features an ISOCIDE™ Powder Coat (silver-impregnated), which inhibits microbial growth, improving safety. Each clean bench is individually factory tested for safety and performance in accordance with international standards.Single unit
- AISOCIDETM powder coat (silver-impregnated) inhibits microbial growth to improve safety
- Low-noise with energy-efficient ECM blowers
- ULPA (ultra low particulate air) filtration is 10x more efficient than HEPA filtration and creates an ISO class 3 work zone
- ULPA Main Filter (99.9995% efficiency for the removal of 0.12 µm diameter or larger PM)
- Improved safety with airflow sensors that monitor airflow in real-time and alerts users of insufficient airflow
-
The CelCulture® CO₂ Incubator is equipped with a range of advanced features, including rapid temperature and gas recovery, ISO Class 5 cleanliness, an ISOCIDE™ antimicrobial coating, and an inner door kit that reduces the risk of contamination. Designed to create an environment that mimics the natural conditions required for the development of embryos, the incubator is able to maintain low levels of oxygen. This is achieved through the use of sophisticated firmware and precision sensors that monitor and regulate the temperature, CO2, and O2 levels within the chamber. The inner door kit further enhances the incubator's performance by facilitating fast parameter recovery and reducing the risk of contamination, with each section of the incubator featuring a dedicated door panel. Available in CO2+O2 control, or CO2-only control.Single unit
- Advanced IR CO2 Sensor
- Advanced, new-generation Zirconia O2 Sensor
- Integrated gas mixer; CO2 and O2 Control
- Extremely reliable and easy-to-use
- Fast Temperature and Gas Recover
- Optional integrated SafeSENS pH System
-
ESCO’s Multi-Zone ART Workstations feature a vertical laminar flow and are equipped with multiple heating zones which provide temperature control throughout the work surface. The ten distinct zones, each with its own heating elements and sensors, automatically prioritize power distribution and provide the user with precise temperature regulation and rapid recovery. Four different temperature modes allow activating and deactivating different zones, simplifying vitrification cooling and warming procedures. These workstations are available in a variety of sizes and configurations to meet different requirements, with options including built-in microscopes and integrated MIRI® chambers. These workstations provide digital control of premixed gas, allowing for precise sample environmental control. An ULPA filtration system ensures clean airflow, filtering particles 10 times smaller than those caught by HEPA filters. The workstation's humidification system and positive pressure work environment ensure that your samples remain safe and uncontaminated. These workstations come equipped with a fully functional integrated touchscreen Windows PC interface that displays real-time information on all work area parameters, including zone temperature performance, gas pressure, and flow rate. The touchscreen interface is easy to use and allows for seamless temperature monitoring and control. With the variety of size and option configurations available, there is sure to be an ESCO IVF Heated Multi-Zone Workstations that fits your needs for safety, reliability, and accuracy.Single unit
- Available in 4 or 6 foot configurations
- Multi-Zone temperature control with Vitrification Mode
- Integrated, fully functional Windows touchscreen PCs
- ULPA Main Filter (99.9995% efficiency for the removal of 0.12 µm diameter or larger PM)
- Integrated humidification system using pre-mixed gas
- Optional tabletop built-in gassed and heated MIRI Chambers
- Quietest hood on the market
-
The Mini MIRI® Dry incubator is a compact and affordable solution for IVF laboratories that prioritize space and cost-effectiveness. With its two-chamber design, it is modeled after the classic MIRI® Multiroom incubator. This dry IVF bench top incubator is unique in that it can recirculate gas within the incubator, and is compatible with a HEPA/VOC filtration system, which is not typical of other humidified IVF incubators. The gas, whether pure N2 and CO2 or premixed, first flows through the tri-gas mixing chamber, where the user sets the desired CO2 and O2 gas concentrations. The gas then passes through the HEPA/VOC filter before entering the incubator chambers. Afterward, the gas undergoes sterilization using UV light (254nm) before returning to the tri-gas mixing chamber and recirculating within the system. This design ensures minimal gas consumption even with lid openings and maintains the recirculating air's cleanliness and safety for the embryo samples.Single unit
- 2 individually-controlled chambers
- Integrated gas mixer; CO2 and O2 Control
- External Validation Ports for Gas and Temperature
- Datalogging Software Included
- Optional integrated SafeSENS pH System
-
The Mini MIRI® Humidity Incubator is a compact and reliable humidified mini bench top incubator that is based on the robust MIRI® design. Its direct heat regulation and compact design prevent vapor condensation and contribute to faster temperature and gas recovery. This humidified incubator uses either premixed gases or pure gas (N2 and CO2) inserts that pass through a tri-gas mixing chamber, ensuring precise gas concentrations before entering the incubator chambers. The gas then recirculates and goes through the gas mixing chamber again, minimizing gas consumption.Single unit
- 2 individually-controlled chambers
- Integrated gas mixer; CO2 and O2 Control
- External Validation Ports for Gas and Temperature
- Datalogging Software Included
- Optional integrated SafeSENS pH System
-
The Esco MIRI® II-12 Multiroom Incubator is a top-of-the-line solution for IVF laboratories, able to meet exacting standards of performance and validation. The incubator features 12 chambers and 24 independent PID temperature controllers to ensure minimum environmental stress for embryos. Each compartment is separate and does not affect the temperature of other chambers. The lid temperature and the temperature in the culture chambers can be regulated and controlled separately, with PET layers separating the top and bottom of each compartment. And because it includes a separate PT-1000 sensor for each compartment, the MIRI® II-12 incubator can accurately monitor and control the temperature of each chamber individually, ensuring optimal conditions for embryo development. The circuitry for the PT-1000 sensors is separated from the unit's electronics, so it remains a genuinely independent validation system. The MIRI® II-12 incubator uses pure CO2 and N2 gases, allowing for precise control of CO2 and O2 concentrations in each chamber. The incubator features a recirculated gas system that ensures quick and complete gas replacement in less than five minutes, with gas cleaned by a 254 nm UVC light with filters to prevent dangerous ozone production. The incubator also has a complete gas control system, including pressure regulators, gas flow sensors, gas pressure sensors, and gas filters. The incubator's software runs on a built-in touchscreen and includes logging functions for long-term data storage, as well as a USB module for off-site evaluation of quality control data. The incubator also includes a pH sensor port, allowing users to measure the pH of samples at any time.Single unit
- 12 individually-controlled chambers
- real-time datalogging touchscreen
- Integrated gas mixer; CO2 and O2 Control
- Extremely reliable and easy-to-use
- Optional integrated SafeSENS pH System
-
The Esco MIRI® Multiroom incubator is an excellent choice for safeguarding embryos in your IVF laboratory. Its six (6) separate chambers not only provide embryologists with a larger capacity to accommodate more embryos but also ensure that environmental conditions are maintained even when adjacent chambers are accessed. The incubator offers the best temperature recovery, accuracy, and uniformity in the IVF market, thanks to its heated lid design. This design guarantees that the temperature provided to your embryos is not solely sourced from the dish's bottom but also delivered from the top, maintaining a set point of 37.2C to ensure a consistent temperature of 37.0C for your samples. The Esco MIRI® Multiroom incubator provides the choice to use pure N2 and CO2 gases, which are more affordable than premixed gases. It recirculates these gas inserts, giving you the best value for your money. This feature also offers you the flexibility to adjust your gas concentration as needed to optimize embryo culture protocols in your laboratory. Additionally, the MIRI® Multiroom is compatible with the most commonly used brands of culture dishes in the market.UNIT
- 6 individually-controlled chambers
- Integrated gas mixer; CO2 and O2 Control
- Extremely reliable and easy-to-use
- Best-priced incubator on the market
- Optional integrated SafeSENS pH System
- Optional Stacking Frame for 2 units
-
The Esco MIRI® Humidified Multiroom incubator is an excellent choice for safeguarding embryos in your IVF laboratory. Its six (6) separate chambers not only provide embryologists with a larger capacity to accommodate more embryos but also ensure that environmental conditions are maintained even when adjacent chambers are accessed. The incubator offers the best temperature recovery, accuracy, and uniformity in the IVF market, thanks to its heated lid design. This design guarantees that the temperature provided to your embryos is not solely sourced from the dish's bottom but also delivered from the top, maintaining a set point of 37.2C to ensure a consistent temperature of 37.0C for your samples. The humidified MIRI includes a built-in humidity sensor for accurate and continuous readings, with a water bottle located on the side of the unit for refilling and easy control of water level. The Esco MIRI® Humidified Multiroom incubator provides the choice to use pure N2 and CO2 gases, which are more affordable than premixed gases. It recirculates these gas inserts, giving you the best value for your money. This feature also offers you the flexibility to adjust your gas concentration as needed to optimize embryo culture protocols in your laboratory. Additionally, the MIRI® Multiroom is compatible with the most commonly used brands of culture dishes in the market.Single unit
- Humidity Bottle allows circulating gas to be humidified
- 6 individually-controlled chambers
- Integrated gas mixer; CO2 and O2 Control
- Extremely reliable and easy-to-use
- Best-priced incubator on the market
- Optional integrated SafeSENS pH System
- Optional Stacking Frame for 2 units
-
The MIRI GA® is a tabletop device specifically designed for external validation of gas concentration and temperature in IVF incubators. This versatile device can validate various types of Esco Medical IVF incubators, including the MIRI® Time-lapse Incubator, MIRI® Multiroom Incubator, Mini MIRI® Incubators, and other brands. Unlike conventional handheld validating devices that require separate devices for temperature and gas concentration measurements, the MIRI® GA can perform both measurements concurrently. Moreover, the device can measure gas and temperature continuously 24/7, whereas conventional devices perform measurements at regular intervals. With its gentle and adjustable gas suction rate of 3L/h, the MIRI® GA consumes less gas than conventional devices, which can use up to 12L/h. The device also features data logging software, including an adjustable alarm threshold, which is not available in conventional devices. Additionally, the MIRI® GA can monitor up to six incubation chambers simultaneously, while conventional devices can only validate one unit at a time.Single unit
- 6-Channel gas and temperature validation
- Continuous 24h/7 days monitoring
- Gas Feedback Loop into incubator
- Datalogging Software
-
Available with 6 or 12 chambers, the MIRI® Time-Lapse Incubator is a multiroom incubator that comes equipped with a microscope and camera. The integrated camera and microscope offer real-time, high-quality time-lapse images of embryo development, eliminating the need for manual microscopy and the potential risks associated with removing embryos from the safe environment of the incubation chamber. With time-lapse embryo monitoring, detailed morphokinetic data throughout the entire developmental process can be gathered, providing insights not available through traditional spot microscopic evaluation. This allows for the observation of all critical events, aiding in the identification of healthy embryos with the highest potential for implantation, and ultimately resulting in higher pregnancy rates. The process of embryo annotation has been simplified with an innovative annotation system, which revolves around “events” located on the left side of the interface. The pre-programmed events list includes t2, t3, t4, t5, t6, t7, t8, morula, blastocyst, and early blastocyst, but the software allows for complete customization of each event. Users can modify the pre-programmed events list by adding other criteria using the advanced parameters in the unit’s Settings menu. To make the process even more user-friendly, an Ideal Time function has been added, represented by a colored circular band on the edge of annotated events. This feature indicates the ideal timings for each event, making it easier to compare the actual timing of embryo development with the ideal timing. In addition to the integrated timelapse and annotation functionality, these incubators feature all of the advantages standard to the MIRI product line, including distinct chambers which ensure the maintenance of environmental conditions, a heated lid to enhance temperature regulation and recovery, an onboard gas mixer, and an optional integrated SafeSENS pH system.UNIT
- Available in 6 or 12 Chambers
- 6 individually-controlled chambers
- Integrated gas mixer; CO2 and O2 Control
- Extremely reliable and easy-to-use
- Best-priced timelapse incubator on the market
- Optional integrated SafeSENS pH System
- Available with Fairtility CHLOE AI System
-
Gynemed’s GM508 CultActive is a bicarbonate-buffered reagent that can be used to determine whether fertilization failure was due to deficient oocyte activation in patients with previously failed ICSI cycles. Patient oocytes are activated using CultActive, followed by incubation to investigate oocyte development.1 ml bottle
- Raw materials are of highest purity and meet European Pharmacopoeia and USP standards
- Certificate of analysis available by lot number
- Store at 2-8oC in dark location
- 6-month shelf life from time of manufacture
- Use within 7 days of opening
-
SpermWash® is Gynotec’s ready-to-use HEPES-buffered medium for all sperm preparation processes. This versatile medium is used for separating healthy motile spermatozoa from the residual semen sample during preparation for IUI, sperm selection, and/or when diluting stock solution of silica-based density gradients. Additionally, SpermWash® can be used for washing human oocytes and embryos, and for embryo transfer processes.100 ml or 250 ml bottle
- Ready-to-use, with a shelf life of 18 months
- HEPES buffer requires no need for CO2 incubation
- Useful in many procedures, including sperm wash processes, oocyte and embryo washing, etc.
-
The Matcher IVF electronic witnessing system is a comprehensive solution designed specifically for IVF clinics and donor banks to ensure accurate patient identification, labeling, workflow scheduling, and traceability throughout the treatment process. By utilizing barcode technology, Matcher minimizes the risk of human error and offers peace of mind to both staff and patients. Using Pocket Matcher and Benchtop Matcher devices, along with ID card and label printers, the Matcher system employs digital photo images to read barcoded labels. The associated software seamlessly integrates with various patient management systems and can be customized to align with clinic-specific Standard Operating Procedures. By incorporating unique barcode identifiers on labels for all labware, media, and consumables, Matcher ensures an audit trail of interactions with gametes and embryos. The system supports the labeling and witnessing of even the smallest items, such as straws and PGT tubes. Additionally, Matcher facilitates the management, reporting, and auditing of cryo stores and vessel space. Clinics that implement the Matcher electronic witnessing system benefit from enhanced safety for staff and patients, streamlined workflow processes, and significant time and cost savings. With its robust error prevention system and comprehensive traceability features, Matcher offers a reliable and efficient solution for maintaining accuracy and compliance throughout the IVF treatment journey.- Error prevention: Alerts to potential mistakes before material transfer occurs.
- Automatic traceability: Matches, confirms, and photographs patient and labware identifiers in every procedure.
- Compliance assistance: Supports clinics in meeting requirements, offering validation and risk assessment support.
- Unbroken chain of custody: Ensures a continuous witnessing chain from registration to cryo stores without additional verification.
- Simple installation: Quick and easy installation process, typically completed within one week, including testing and training.
-
The Kitazato Oocyte Cryoplate is an innovative tool designed for the efficient completion of the equilibration process in oocyte cryopreservation. This dish allows the entire cryopreservation procedure to be performed on a single platform, significantly enhancing the efficiency and consistency of the process. Each dish comes clearly labeled with the necessary protocol details, such as type, volume, and time, effectively minimizing operational errors and ensuring adherence to consistent procedures. In addition to its streamlined design, the Cryoplate is engineered to maintain the equilibration conditions of cryopreservation solution consistently, leading to stable and reliable results. The inclusion of a grooved lid for securing the Cryotop further enhances operability, simplifying the handling process. The Kitazato Cryoplate represents a blend of convenience, precision, and reliability, making it a valuable asset for professionals in the field of cryopreservation.10 units / pack
- Streamlines equilibration in oocyte cryopreservation efficiently.
- Labeled dish minimizes errors, ensures protocol adherence.
- High reproducibility for stable cryopreservation results.
- Grooved lid design improves Cryotop handling and operability.
-
In in vitro fertilization (IVF) procedures, maintaining an optimal and consistent temperature is critical for the survival and development of embryos. This is where a test tube warmer comes into play. The EllioSafe T.H. Tube Warmer is used to keep the media a constant body-like temperature (approximately 37 degrees Celsius or 98.6 degrees Fahrenheit). Ensuring that these materials stay at this temperature even outside of the incubator during handling and various procedural steps can help improve the overall success rate of IVF treatments. By creating an environment that closely mimics the human body, a test tube warmer reduces potential temperature-induced stress on the embryos, supporting their development and increasing the likelihood of a successful pregnancy. The temperature of the EllioSafe T.H. can be adjusted and the unit comes up to temperature within 10-15 minutes.Single unit
- 14 places for receiving harvested samples
- 2 colors: gray and gold
- Optional battery
-
The Nilotech surface temperature probes are the ultimate solution for controlling and calibrating incubators and warming surfaces. Their copper bottom design guarantees optimal thermal contact for precise temperature measurement. The probes can be conveniently placed on an incubator shelf or bottom, and can also be inserted into dishware for temperature monitoring. The insulated tops minimize the impact of ambient air, making them ideal for use on warming plates or inside flow cabinets without interfering with the accuracy of the measurements. The probes are also equipped with a small microchip that carries the calibration data, enabling easy re-calibration without the need to send the tablet. When re-calibration is required, only the probe needs to be sent in for servicing, making the process quick and convenient. Various models of probes are available.Single unit
- High-accuracy probes: ± 0.03°C
- Copper bottom for best heat transfer
- Insulated cap for stability
- Thin cord design for fit
- Robust design
- Multiple models available
-
NordicCell’s Aspiration pump tubing works as an extension from the aspiration needle to an aspiration pump. The tubing is equipped with male/female luer connections, with a male luerlock towards the aspiration needle and female luerlock towards the protection filter on the aspiration pump. The associated pump protection filter is a hydrophobic protection filter designed to prevent any fluid from getting into the aspiration pump. It is packaged as individual sterilized units to protect the aspiration pump. The pump protection filter fits the supplied luerlock connector, which is intended to be mounted permanently on the air-intake valve of the pump.25 units/bag
- Protection filter fits a variety of aspiration pumps (see brochure for details)
-
Fertitech offers rental services for OKOLAB Heated Plates, designed to enhance microscopy with precise temperature control for Nikon and Olympus inverted microscopes. These heated plates utilize an Indium Tin Oxide (ITO) coating to ensure uniform heating across the glass surface, combined with a surface sensor that guarantees accurate temperature measurements. Suitable for various microscope models, these plates support both metal and glass heating options to accommodate different research needs. Made from chemically strengthened DragonTail glass and protected by a robust aluminum frame, these plates promise durability and reliability. Renting from Fertitech provides a flexible and cost-effective solution for researchers needing temporary or periodic access to advanced microscope enhancements without the commitment of a purchase. -
The OKOLAB Heated Plate designed for inverted microscopes utilizes an Indium Tin Oxide (ITO) coating, which ensures consistent heating across the entire glass surface. These plates are also equipped with a surface sensor, guaranteeing precise and accurate temperature measurements. The heated plates are compatible with various inverted microscope brands, providing support for a wide range of models available in the market. The plates are offer both metal and glass heating to cater to different preferences and requirements. The DragonTail glass used in the heated plates is chemically strengthened and further safeguarded by a sturdy aluminum frame, ensuring durability and protection.
Single unit
- 0.5 mm thick, scratch-resistant, break-resistant glass
- DragonTail Glass 10 years warranty against damage
- aluminum frame for increased rigidity
- Available in Metal heated and Glass Heated options
- All microscope types and rages
- Requires heating controller