UNIT
- 6 individually-controlled chambers
- Integrated gas mixer; CO2 and O2 Control
- Extremely reliable and easy-to-use
- Best-priced incubator on the market
- Optional integrated SafeSENS pH System
- Optional Stacking Frame for 2 units
Esco Lifesciences
Esco Lifesciences, a world-leading life science company, offers a diversified portfolio of laboratory and biopharma equipment, and IVF medical devices to over 100 countries. They provide tailored solutions to meet the unique needs of laboratories across various industries. Committed to innovation, Esco Lifesciences supports successful research, development, and quality control in clinical and industrial laboratories. Additionally, they supply reliable, efficient ART equipment to meet the growing demands of the IVF industry and promote equitable access to infertility care.
-
The Esco MIRI® Multiroom incubator is an excellent choice for safeguarding embryos in your IVF laboratory. Its six (6) separate chambers not only provide embryologists with a larger capacity to accommodate more embryos but also ensure that environmental conditions are maintained even when adjacent chambers are accessed. The incubator offers the best temperature recovery, accuracy, and uniformity in the IVF market, thanks to its heated lid design. This design guarantees that the temperature provided to your embryos is not solely sourced from the dish's bottom but also delivered from the top, maintaining a set point of 37.2C to ensure a consistent temperature of 37.0C for your samples. The Esco MIRI® Multiroom incubator provides the choice to use pure N2 and CO2 gases, which are more affordable than premixed gases. It recirculates these gas inserts, giving you the best value for your money. This feature also offers you the flexibility to adjust your gas concentration as needed to optimize embryo culture protocols in your laboratory. Additionally, the MIRI® Multiroom is compatible with the most commonly used brands of culture dishes in the market. -
The Esco MIRI® Humidified Multiroom incubator is an excellent choice for safeguarding embryos in your IVF laboratory. Its six (6) separate chambers not only provide embryologists with a larger capacity to accommodate more embryos but also ensure that environmental conditions are maintained even when adjacent chambers are accessed. The incubator offers the best temperature recovery, accuracy, and uniformity in the IVF market, thanks to its heated lid design. This design guarantees that the temperature provided to your embryos is not solely sourced from the dish's bottom but also delivered from the top, maintaining a set point of 37.2C to ensure a consistent temperature of 37.0C for your samples. The humidified MIRI includes a built-in humidity sensor for accurate and continuous readings, with a water bottle located on the side of the unit for refilling and easy control of water level. The Esco MIRI® Humidified Multiroom incubator provides the choice to use pure N2 and CO2 gases, which are more affordable than premixed gases. It recirculates these gas inserts, giving you the best value for your money. This feature also offers you the flexibility to adjust your gas concentration as needed to optimize embryo culture protocols in your laboratory. Additionally, the MIRI® Multiroom is compatible with the most commonly used brands of culture dishes in the market.Single unit
- Humidity Bottle allows circulating gas to be humidified
- 6 individually-controlled chambers
- Integrated gas mixer; CO2 and O2 Control
- Extremely reliable and easy-to-use
- Best-priced incubator on the market
- Optional integrated SafeSENS pH System
- Optional Stacking Frame for 2 units
-
Available with 6 or 12 chambers, the MIRI® Time-Lapse Incubator is a multiroom incubator that comes equipped with a microscope and camera. The integrated camera and microscope offer real-time, high-quality time-lapse images of embryo development, eliminating the need for manual microscopy and the potential risks associated with removing embryos from the safe environment of the incubation chamber. With time-lapse embryo monitoring, detailed morphokinetic data throughout the entire developmental process can be gathered, providing insights not available through traditional spot microscopic evaluation. This allows for the observation of all critical events, aiding in the identification of healthy embryos with the highest potential for implantation, and ultimately resulting in higher pregnancy rates. The process of embryo annotation has been simplified with an innovative annotation system, which revolves around “events” located on the left side of the interface. The pre-programmed events list includes t2, t3, t4, t5, t6, t7, t8, morula, blastocyst, and early blastocyst, but the software allows for complete customization of each event. Users can modify the pre-programmed events list by adding other criteria using the advanced parameters in the unit’s Settings menu. To make the process even more user-friendly, an Ideal Time function has been added, represented by a colored circular band on the edge of annotated events. This feature indicates the ideal timings for each event, making it easier to compare the actual timing of embryo development with the ideal timing. In addition to the integrated timelapse and annotation functionality, these incubators feature all of the advantages standard to the MIRI product line, including distinct chambers which ensure the maintenance of environmental conditions, a heated lid to enhance temperature regulation and recovery, an onboard gas mixer, and an optional integrated SafeSENS pH system.UNIT
- Available in 6 or 12 Chambers
- 6 individually-controlled chambers
- Integrated gas mixer; CO2 and O2 Control
- Extremely reliable and easy-to-use
- Best-priced timelapse incubator on the market
- Optional integrated SafeSENS pH System
- Available with Fairtility CHLOE AI System
-
The Esco MIRI® II-12 Multiroom Incubator is a top-of-the-line solution for IVF laboratories, able to meet exacting standards of performance and validation. The incubator features 12 chambers and 24 independent PID temperature controllers to ensure minimum environmental stress for embryos. Each compartment is separate and does not affect the temperature of other chambers. The lid temperature and the temperature in the culture chambers can be regulated and controlled separately, with PET layers separating the top and bottom of each compartment. And because it includes a separate PT-1000 sensor for each compartment, the MIRI® II-12 incubator can accurately monitor and control the temperature of each chamber individually, ensuring optimal conditions for embryo development. The circuitry for the PT-1000 sensors is separated from the unit's electronics, so it remains a genuinely independent validation system. The MIRI® II-12 incubator uses pure CO2 and N2 gases, allowing for precise control of CO2 and O2 concentrations in each chamber. The incubator features a recirculated gas system that ensures quick and complete gas replacement in less than five minutes, with gas cleaned by a 254 nm UVC light with filters to prevent dangerous ozone production. The incubator also has a complete gas control system, including pressure regulators, gas flow sensors, gas pressure sensors, and gas filters. The incubator's software runs on a built-in touchscreen and includes logging functions for long-term data storage, as well as a USB module for off-site evaluation of quality control data. The incubator also includes a pH sensor port, allowing users to measure the pH of samples at any time.Single unit
- 12 individually-controlled chambers
- real-time datalogging touchscreen
- Integrated gas mixer; CO2 and O2 Control
- Extremely reliable and easy-to-use
- Optional integrated SafeSENS pH System
-
ESCO’s Multi-Zone ART Workstations feature a vertical laminar flow and are equipped with multiple heating zones which provide temperature control throughout the work surface. The ten distinct zones, each with its own heating elements and sensors, automatically prioritize power distribution and provide the user with precise temperature regulation and rapid recovery. Four different temperature modes allow activating and deactivating different zones, simplifying vitrification cooling and warming procedures. These workstations are available in a variety of sizes and configurations to meet different requirements, with options including built-in microscopes and integrated MIRI® chambers. These workstations provide digital control of premixed gas, allowing for precise sample environmental control. An ULPA filtration system ensures clean airflow, filtering particles 10 times smaller than those caught by HEPA filters. The workstation's humidification system and positive pressure work environment ensure that your samples remain safe and uncontaminated. These workstations come equipped with a fully functional integrated touchscreen Windows PC interface that displays real-time information on all work area parameters, including zone temperature performance, gas pressure, and flow rate. The touchscreen interface is easy to use and allows for seamless temperature monitoring and control. With the variety of size and option configurations available, there is sure to be an ESCO IVF Heated Multi-Zone Workstations that fits your needs for safety, reliability, and accuracy.Single unit
- Available in 4 or 6 foot configurations
- Multi-Zone temperature control with Vitrification Mode
- Integrated, fully functional Windows touchscreen PCs
- ULPA Main Filter (99.9995% efficiency for the removal of 0.12 µm diameter or larger PM)
- Integrated humidification system using pre-mixed gas
- Optional tabletop built-in gassed and heated MIRI Chambers
- Quietest hood on the market
-
The CelCulture® CO₂ Incubator is equipped with a range of advanced features, including rapid temperature and gas recovery, ISO Class 5 cleanliness, an ISOCIDE™ antimicrobial coating, and an inner door kit that reduces the risk of contamination. Designed to create an environment that mimics the natural conditions required for the development of embryos, the incubator is able to maintain low levels of oxygen. This is achieved through the use of sophisticated firmware and precision sensors that monitor and regulate the temperature, CO2, and O2 levels within the chamber. The inner door kit further enhances the incubator's performance by facilitating fast parameter recovery and reducing the risk of contamination, with each section of the incubator featuring a dedicated door panel. Available in CO2+O2 control, or CO2-only control.Single unit
- Advanced IR CO2 Sensor
- Advanced, new-generation Zirconia O2 Sensor
- Integrated gas mixer; CO2 and O2 Control
- Extremely reliable and easy-to-use
- Fast Temperature and Gas Recover
- Optional integrated SafeSENS pH System
-
The Mini MIRI® Dry incubator is a compact and affordable solution for IVF laboratories that prioritize space and cost-effectiveness. With its two-chamber design, it is modeled after the classic MIRI® Multiroom incubator. This dry IVF bench top incubator is unique in that it can recirculate gas within the incubator, and is compatible with a HEPA/VOC filtration system, which is not typical of other humidified IVF incubators. The gas, whether pure N2 and CO2 or premixed, first flows through the tri-gas mixing chamber, where the user sets the desired CO2 and O2 gas concentrations. The gas then passes through the HEPA/VOC filter before entering the incubator chambers. Afterward, the gas undergoes sterilization using UV light (254nm) before returning to the tri-gas mixing chamber and recirculating within the system. This design ensures minimal gas consumption even with lid openings and maintains the recirculating air's cleanliness and safety for the embryo samples.Single unit
- 2 individually-controlled chambers
- Integrated gas mixer; CO2 and O2 Control
- External Validation Ports for Gas and Temperature
- Datalogging Software Included
- Optional integrated SafeSENS pH System
-
The ESCO Airstream Laminar Flow Air Flow Cabinet is an excellent choice for clinics and labs which require a sterile workspace with a constant filtered airflow. These benches provide a sterile environment ideal for medical and laboratory applications, as purified air travels across the working zone of the cabinet in a vertical, unidirectional stream. Airstream benches offer a high level of protection for both samples and users, ensuring the aseptic and particle-free conditions that are necessary for safe work with samples in open dishes. This vertical laminar flow workstation provides sample protection with ULPA filtration, which is 10x as efficient as HEPA filtration and creates an ISO Class 3 work zone. The laminar flow bench is highly efficient, incorporating the latest generation of DC ECM motors, and is able to maintain a stable airflow despite voltage fluctuations. This stable airflow eliminates turbulence and the possibility of dead corners in the work zone. In addition to its filtration capabilities, the ESCO Airstream Laminar Flow Bench also offers a comfortable low noise level of 52dBA* (LVG-4A in open field condition). The ESCO Airstream Laminar Flow Air Flow Cabinet has been tested for cross-contamination and product protection using a microbiological test method adopted from EN12469. The laminar flow bench also features an ISOCIDE™ Powder Coat (silver-impregnated), which inhibits microbial growth, improving safety. Each clean bench is individually factory tested for safety and performance in accordance with international standards.Single unit
- AISOCIDETM powder coat (silver-impregnated) inhibits microbial growth to improve safety
- Low-noise with energy-efficient ECM blowers
- ULPA (ultra low particulate air) filtration is 10x more efficient than HEPA filtration and creates an ISO class 3 work zone
- ULPA Main Filter (99.9995% efficiency for the removal of 0.12 µm diameter or larger PM)
- Improved safety with airflow sensors that monitor airflow in real-time and alerts users of insufficient airflow
-
The MIRI GA® is a tabletop device specifically designed for external validation of gas concentration and temperature in IVF incubators. This versatile device can validate various types of Esco Medical IVF incubators, including the MIRI® Time-lapse Incubator, MIRI® Multiroom Incubator, Mini MIRI® Incubators, and other brands. Unlike conventional handheld validating devices that require separate devices for temperature and gas concentration measurements, the MIRI® GA can perform both measurements concurrently. Moreover, the device can measure gas and temperature continuously 24/7, whereas conventional devices perform measurements at regular intervals. With its gentle and adjustable gas suction rate of 3L/h, the MIRI® GA consumes less gas than conventional devices, which can use up to 12L/h. The device also features data logging software, including an adjustable alarm threshold, which is not available in conventional devices. Additionally, the MIRI® GA can monitor up to six incubation chambers simultaneously, while conventional devices can only validate one unit at a time.Single unit
- 6-Channel gas and temperature validation
- Continuous 24h/7 days monitoring
- Gas Feedback Loop into incubator
- Datalogging Software
-
The Mini MIRI® Humidity Incubator is a compact and reliable humidified mini bench top incubator that is based on the robust MIRI® design. Its direct heat regulation and compact design prevent vapor condensation and contribute to faster temperature and gas recovery. This humidified incubator uses either premixed gases or pure gas (N2 and CO2) inserts that pass through a tri-gas mixing chamber, ensuring precise gas concentrations before entering the incubator chambers. The gas then recirculates and goes through the gas mixing chamber again, minimizing gas consumption.Single unit
- 2 individually-controlled chambers
- Integrated gas mixer; CO2 and O2 Control
- External Validation Ports for Gas and Temperature
- Datalogging Software Included
- Optional integrated SafeSENS pH System
-
The ESCO Airstream® NS G4 Class II Type A2 Biological Safety Cabinet is an NSF-certified unit equipped with the Centurion Touchscreen controller. Designed for laboratory use, the cabinet features dimmable LED illumination and a raised, stainless-steel armrest for user comfort. Two model variants are available: the S-Series has stainless steel side walls with side capture zones and a single-piece work tray that is designed to retain spills, while the E-Series comes with tempered glass side walls and a multi-piece, autoclavable work tray. Each variant is available in three-, four-, five-, and six-foot configurations. Both models provide filtration efficiency that is 10 times higher than standard HEPA filters, establishing an ISO Class 3 work zone instead of the more common ISO Class 5. Despite this increased efficiency, the filter has a lifespan of 10 years, with replacement costs equivalent to HEPA filters. The cabinet's design prioritizes safety, while also considering space constraints in laboratory settings. The Centurion Touchscreen Controller adds a layer of operational clarity for users.Single unit
- Centurion Touchscreen Controller: Provides a clear 3D BSC diagram displaying safety information and cabinet alarms, includes details on alarm types and intervention instructions, angled for ease of viewing, and offers a Quickstart mode for rapid operation.
- Lighting: Features dimmable LED lights with adjustable work zone brightness, producing a light intensity of 1200 lux, contributing to energy efficiency.
- Ergonomic Design: Comes with an 8” sash opening, and the frame is constructed of shatterproof, UV-absorbing tempered glass. It also includes support beams to reduce vibration and a holder for easier drain pan cleaning.
- Connectivity: Equipped with a USB port for data log access and BMS connectivity. Also integrates a Remote Modbus feature for remote secure access from external devices.
- Cabinet Variants: S-Series: Features stainless steel side walls with negative pressure for containment and a single-piece spill-retaining work tray, or E-Series: Designed with tempered glass side walls for increased visibility and a multi-piece, autoclavable work tray.
- Energy Efficiency: Incorporates an energy-efficient DC ECM for up to 70% energy savings compared to AC motors. The cabinet has a standby mode and an overall low energy consumption.
- ULPA Filter: Offers filtration efficiency ten times greater than HEPA filters, creating an ISO Class 3 work zone. This filter maintains a lifespan of 10 years with comparable replacement costs to HEPA filters.
- Isocide™ Coating: An antimicrobial powder coating on the cabinet surfaces that can eliminate 99.9% of surface bacteria within a 24-hour period.
-
The ESCO Medical CultureCoin® is a single-use, gamma-sterilized IVF culture dish, designed for use with the MIRI® TL, ESCO Medical's time-lapse incubator. The MIRI® TL's state-of-the-art technology captures real-time images of developing embryos, providing a continuous view in the form of time-lapse videos. The CultureCoin® facilitates the MIRI® TL’s capture of images, as each of the 14 wells on the coin has a 300µm optically clear area for optimal microscopy. The CultureCoin® features an ergonomic layout, which ensures the secure and effective handling of embryos, and oxygen plasma-treated surfaces, which are designed to prevent bubble formation. Each culture well also includes two wash wells for cell manipulation, washing, or replacing culture media, and a pH reservoir to allow spot pH measurement without interaction with any cultured samples.25 dishes/box
- 14 numbered wells for easy location and tracking by the user. Each well also includes two washing wells for cell manipulations and media changes.
- Mounted lid ensures complete coverage of the culture area for added security.
- A specially designed area for pH measurement that doesn't disturb the cultured samples.
- Flat bottom design is ideal for facilitating heat transfer from below, enhancing the culture environment.
- Gamma-sterilized