Single unit
- Made from one solid block
- Specially insulated to guarantee heat transfer to the top of the block
- Removable cover for easy cleaning
- Specially treated to minimize heat radiation outside the block
-
The NiloBlock 14S from Nilotech is an advanced insulated warming block designed to provide optimal temperature stability for test tubes. This innovative device features a unique design that minimizes heat loss while allowing for visual inspection of tube contents. It is compatible with standard warming surfaces and block warmers, making it a versatile addition to any laboratory. Key to its design is each compartment's rounded bottom, which ensures optimal heat transfer, while the block and tubes are thermally insulated from the outside by a thin layer of air between the block and cover. This insulation provides a consistent temperature across the tubes. The NiloBlock 14S also features a transparent cover that enables easy viewing of tube contents, which is particularly beneficial during procedures such as oocyte retrieval. Additionally, the cover is designed to snap on and off effortlessly for cleaning, providing added convenience. -
Measuring gas levels inside incubators has always been a challenge, particularly with gas analyzers that require aspirating gas out of the incubator. Even the slightest gas aspirations can affect the stability of desktop incubators. However, the NiloChecker gas sensor is a game changer, as it can be placed inside the incubator without disrupting internal conditions or aspirating gas. It even allows for averaging readings over longer periods of time. The combined Carbon dioxide (CO2) and Oxygen (O2) probe is a revolutionary device in terms of both design and performance. Its extremely flat design and flexible connection enable it to be inserted into any type of incubator, including desktop models. By measuring gas levels inside the incubator without pumping gas out, the measurement results are more accurate and precise. This innovation represents a significant advancement in the field of gas measurements for incubators.Single unit
- Very Thin Cord for incubator door closing
- Inserted inside incubation chambers
- Easy to use
- Quick and affordable calibration
- No moving parts
-
The DG126 Digital Carbon Dioxide (CO2) and Oxygen (O2) Probe with Pump is a compact and versatile device designed for accurate gas monitoring in various incubator types. Its integrated pump enables precise and simultaneous measurements of CO2 and O2 levels. The flexible tubing allows for easy sampling from different ports or narrow openings. The probe can be connected to the NiloChecker device, which facilitates the start/stop of measurements, monitoring progress, and storing data for later analysis. This probe is suitable for both box-type and desktop incubators, offering a practical solution for gas measurement needs.Single unit
- Simultaneous CO2 and O2 measurements with integrated pump.
- Flexible tubing for easy sampling from various ports.
- Can be connected to the NiloChecker device for control and data management.
- Suitable for both box-type and desktop incubators.
- Compact and versatile design for minimal space usage.
- Supports connection of up to five DG126 probes simultaneously.
-
The Nilotech PT120 is a platinum 1mm flexible temperature probe designed for precision measurement in narrow openings down to 1mm in diameter. A compact design allows for unobstructive integration into a variety of systems while its PT-100 sensor offers high accuracy and stability over a wide temperature range. Approved for use with VitroLife Embryoscope systems, the PT120 enables real-time monitoring and control with its quick response time. The probe can be used on various surfaces, including metal, glass, and plastic, and is suitable for controlling heated stages and measuring liquids in water-tight pouches.Single unit
- Approved for use with VitroLife Embryoscope systems
- High accuracy PT-100 sensor with 0.03°C precision
- Quick response time with 0.01°C resolution
- Suitable for narrow openings down to 1 mm
- Durable design with flexible FR-4 and epoxy materials
- Operates in a wide temperature range of -50°C to 50°C
- Includes factory calibration certificate, ISO/IEC 17025 compliant
-
The NiloTech NiloChecker Tablet serves as a versatile laboratory quality control instrument, able to monitor a variety of parameters, including temperature and gas points. It allows for simultaneous connections to up to five different probes, providing a comprehensive monitoring solution. Moreover, the NiloChecker can control and calibrate various lab equipment, including incubators, laminar flow workstations, and warming systems. This eliminates the need for multiple devices from different manufacturers. With its expanding array of compatible measurement probes, the NiloChecker is a secure long-term investment for laboratory quality control. The tablet features a user-friendly touch screen interface that guides you through measurements with ease. The device is designed to help you perform measurements in accordance with international standards and manufacturer recommendations, ensuring accurate and reliable results. With the "target select" function, organizing data for quality reports has never been easier. Its 'target select' function aids in organizing data for quality reports, and the glove-compatible 7" screen offers convenience in laboratory settings. It automatically records and organizes data and can calculate statistical including averages and deviations.Single unit
- Large 7" glove-friendly touchscreen
- Up to 10 simultaneous probe readings
- Wide range of temperature, gas and air glow probes
- No maintenance or calibration required
- Long battery life
-
The Nilotech surface temperature probes are the ultimate solution for controlling and calibrating incubators and warming surfaces. Their copper bottom design guarantees optimal thermal contact for precise temperature measurement. The probes can be conveniently placed on an incubator shelf or bottom, and can also be inserted into dishware for temperature monitoring. The insulated tops minimize the impact of ambient air, making them ideal for use on warming plates or inside flow cabinets without interfering with the accuracy of the measurements. The probes are also equipped with a small microchip that carries the calibration data, enabling easy re-calibration without the need to send the tablet. When re-calibration is required, only the probe needs to be sent in for servicing, making the process quick and convenient. Various models of probes are available.Single unit
- High-accuracy probes: ± 0.03°C
- Copper bottom for best heat transfer
- Insulated cap for stability
- Thin cord design for fit
- Robust design
- Multiple models available
-
NordicCell’s Aspiration pump tubing works as an extension from the aspiration needle to an aspiration pump. The tubing is equipped with male/female luer connections, with a male luerlock towards the aspiration needle and female luerlock towards the protection filter on the aspiration pump. The associated pump protection filter is a hydrophobic protection filter designed to prevent any fluid from getting into the aspiration pump. It is packaged as individual sterilized units to protect the aspiration pump. The pump protection filter fits the supplied luerlock connector, which is intended to be mounted permanently on the air-intake valve of the pump.25 units/bag
- Protection filter fits a variety of aspiration pumps (see brochure for details)
-
The NordicCell MTG Multipurpose Storage Cassettes are used for storing samples in LN2 dewars. These cassettes are ether Flat or Triangular-Weighted, and come in many different colors.10 pcs / bag
- Clear plastic sleeves protect samples inside LN2 storage dewars
- Flat or triangular-weighted, Short or Long
- Color-Coded for easy identification
- Transparency allows sample identification without removing the casing
-
Fertitech offers rental of Novaerus air filtration equipment to effectively tackle air quality issues in environments affected by temporary disturbances or contamination sources. Ideal for situations where particulate matter or volatile organic compounds (VOCs) have compromised air quality, Novaerus technology swiftly and reliably restores air to safe parameters. Our rental service provides a practical and efficient solution for restoring and maintaining optimal air quality, ensuring health and safety standards are met without the need for permanent installation. Trust Fertitech to provide top-tier air filtration solutions when and where you need them most. -
The Novaerus Defend 1050 is a high-capacity, portable air disinfection unit designed specifically for rapid remediation in large spaces or high-risk environments. It utilizes Novaerus's patented ultra-low energy plasma technology to effectively deactivate airborne pathogens and neutralize volatile organic compounds (VOCs). This technology, paired with a triple-stage Camfil® filter system, provides a comprehensive solution for air disinfection and particle removal, reducing the risk of airborne contamination. The Defend 1050 has proven its effectiveness, demonstrating a 4-log (99.99%) reduction of both the MS2 bacteriophage RNA virus, an accepted surrogate for SARS-CoV-2, and Bacillus Globigii endospores within a 15-minute timeframe. A 5-speed fan allows for adjustable airflow, facilitating its adaptability to various environments and needs. This free-standing unit, designed for ease of use and portability, can be wheeled easily to the point of care and plugs into any standard outlet. It offers a flexible and efficient solution to improve air quality in indoor spaces, such as IVF labs, where airborne pollutants can impact crucial processes and outcomes. Note that replacement filters are sold separately.
Single unit
- Contains six Novaerus plasma coils that rapidly deactivate bacteria and viruses at the molecular level.
- Utilizes a Camfil® HEPA filter for trapping bacterial debris and fine particulate matter down to 0.12µm.
- Rapid remediation capability, demonstrated to achieve a 4-log (99.99%) reduction of both MS2 bacteriophage RNA virus and Bacillus Globigii endospores within 15 minutes.
- Versatile and mobile, designed as a free-standing unit that can be wheeled easily to point of care, plugging into any outlet.
- Suitable for large spaces and high-risk infection situations, offering continuous air disinfection and particle removal to improve indoor air quality.
-
The Novaerus Defend 400 is a portable, recirculating air cleaning system designed for continuous 24/7 use in healthcare and other high-risk environments. This FDA-cleared Class II Medical Device is engineered to inactivate airborne pathogens and purify indoor air, making it an essential tool in settings where infection control is critical. At the heart of the Defend 400 is WellAir’s patented NanoStrike™ technology, which provides a multi-stage inactivation process. NanoStrike technology works by rapidly inactivating airborne microorganisms at the DNA level, preventing them from causing infection. The NanoStrike coils create a powerful burst that perforates pathogen cell walls, leading to their destruction through a combination of osmotic pressure and electroporation by electromagnetic fields. This process ensures that the pathogens are no longer viable, offering reliable protection against a wide range of airborne threats. The Defend 400 combines NanoStrike technology with a triple-stage filtration system from Camfil®. This system includes a pre-filter for capturing large particles, a HEPA H13 filter for trapping bacterial debris and fine particles as small as 0.12 microns, and a carbon/molecular filter for neutralizing volatile organic compounds (VOCs), gases, and odors. Together, these components create a comprehensive air disinfection and purification process that is both effective and efficient. Designed for use in medium to small-sized rooms, the Defend 400 is ideal for environments such as operating rooms, outpatient surgery centers, ICUs, dental practices, and other areas where the risk of airborne infection is high. With its portable, plug-and-play design, the Defend 400 can be easily moved to different locations as needed, providing consistent and reliable air quality wherever it is deployed. This device represents a key line of defense against airborne pathogens, ensuring safer indoor environments for both patients and healthcare providers.Single unit
- NanoStrike™ Technology: Rapidly inactivates airborne pathogens at the DNA level using a multi-stage inactivation process, ensuring pathogens are no longer viable.
- Triple-Stage Filtration System: Combines a pre-filter, HEPA H13 filter, and carbon/molecular filter to capture particles as small as 0.12 microns, neutralize VOCs, and remove odors.
- Portable and Easy to Use: Designed for plug-and-play operation with no installation required, the Defend 400 can be easily moved to different locations as needed.
- 24/7 Continuous Protection: Suitable for around-the-clock operation in healthcare and high-risk environments, providing consistent air disinfection and purification.
- FDA Cleared Class II Medical Device: Certified for medical use, offering reliable air cleaning in settings where infection control is critical, such as ICUs, operating rooms, and dental practices.
-
Oosafe®’s 5 ml multi-purpose andrology tube has a variety of uses in the laboratory. The dual position push-on cap enables venting and prevents sample loss and evaporation. Every lot of Oosafe® plasticware is tested to ensure the delivery of high-quality tubes that you can depend on for your IVF procedures.Multipack – Case of 500 (packaged in packs of 10 tubes)
- Easy push-on cap design
- Easy peel-open breathable packaging eliminates the need for off gassing prior to use
- Every lot assessed for one cell mouse embryo assay (MEA > 80% blastocyst), endotoxin testing (LAL < 0.03 EU/mL) and human sperm survival and motility testing (SMI > 0.75)
- Manufactured and sterilized in an ISO 9001 and ISO 13485 certified facility
- Made of medical grade USP VI tested raw materials
- Sterilized with gamma irradiation and CE marked
- 5 ml volume tube, minimum volume measured at 0.5 ml
-
The Novaerus Protect 200 is a compact air filtration system designed for continuous air disinfection and odour control in small indoor spaces. It utilizes patented filter-free ultra-low energy plasma technology, which destroys contaminants at the DNA level, to ensure the air in your space remains clean and healthy. Equipped with a single-speed fan, the device draws in contaminated air, neutralizes it with an internal plasma coil, and returns it to the room free from contaminants. The system can either be wall-mounted or placed on any surface, offering flexible installation options, and it conveniently plugs into any outlet.Single unit
- Utilizes patented NanoStrike technology to disintegrate airborne viruses and pathogens.
- Proven 99.99% effectiveness against MS2 bacteriophage, a surrogate for SARS-CoV-2.
- Independently tested in U.S. labs with proven effectiveness against viruses such as SARS-CoV-2, Influenza, and Measles, as well as bacteria like Tuberculosis.
- Requires no maintenance, cleaning, or replacement components, providing a hassle-free ownership experience.
- Designed with gills on all sides for efficient air intake and purification, with the lower vents channeling purified air back into the room.
-
The Novaerus Protect 900 (NV900) is a dynamic air disinfection and odour control system designed for medium indoor spaces. Utilizing the patented NanoStrike technology, it employs an atmospheric plasma discharge, similar to lightning strikes, to kill and deactivate harmful airborne microorganisms at the DNA level, impeding the spread of viruses and inhibiting the reproduction of bacteria and fungal spores. This 2-speed fan unit can be wall-mounted or placed on a stand, offering flexibility in placement. The NV900 is designed for continuous operation, and can be conveniently plugged into any outlet. Independent laboratory tests have proven NanoStrike's effectiveness against a broad range of airborne pathogens, including the smallest viruses, bacteria, mould spores, and VOCs. Moreover, this technology is adept at neutralizing volatile organic compounds (VOCs) and reducing particulates like mould spores, dust mites, pollen, and dander. This ultra-low energy system provides a robust and maintenance-free solution for air disinfection needs.Single unit
- Utilizes patented NanoStrike technology to disintegrate airborne viruses and pathogens.
- Efficient in neutralizing VOCs and reducing particulates such as mould spores, dust mites, pollen, and dander.
- Designed for continuous air disinfection and odor control in medium indoor spaces.
- Flexible installation options - can be wall-mounted or placed on a stand.
- 2-speed fan for adjustable airflow and purification.
- Independently tested and proven effective against a broad spectrum of airborne pathogens.
- Easy to use with simple plug-and-play functionality.
-
The OKOLAB H401-T-CONTROLLER is a 2-channel temperature controller equipped with a 4.3'' touch screen interface. It can independently control up to two H401 heating devices simultaneously, allowing for increased lab efficiency. The controller includes an external temperature sensor and self-calibration routines, facilitating precise calibration and ensuring the highest accuracy of sample temperature. The controller also features built-in data logging capabilities, enabling temperature recording over time, along with logging calibration events and alarms. The data can be easily downloaded to USB drives for further analysis. For enhanced security, the controller is equipped with password-protected routines for re-calibrating sensors against certified thermometers. The H401-T-PENNY is a compact single-channel temperature controller. Compatible with all OKOLAB single-channel metal and glass heated plates and heated objective collars, it blends performance with simplicity and affordability without compromising on quality or functionality.Single unit
H401 T-Controller:- Dual Channel: one controller can control independently up to two devices
- Self calibration routines allow to improve temperature accuracy
- External T - sensor (included)
- On-board Data logging and download routines to USB drive
- On-board logging of calibration and alarm events
- Alarm buzzer and External Alarm Connector
- Password protected procedure for periodic calibration against certified thermometer
- One-Point Temperature Calibration and Adjustment
- Performance and simplicity at an affordable price
-
Fertitech offers rental services for OKOLAB Heated Plates, designed to enhance microscopy with precise temperature control for Nikon and Olympus inverted microscopes. These heated plates utilize an Indium Tin Oxide (ITO) coating to ensure uniform heating across the glass surface, combined with a surface sensor that guarantees accurate temperature measurements. Suitable for various microscope models, these plates support both metal and glass heating options to accommodate different research needs. Made from chemically strengthened DragonTail glass and protected by a robust aluminum frame, these plates promise durability and reliability. Renting from Fertitech provides a flexible and cost-effective solution for researchers needing temporary or periodic access to advanced microscope enhancements without the commitment of a purchase. -
The OKOLAB Heated Plate designed for inverted microscopes utilizes an Indium Tin Oxide (ITO) coating, which ensures consistent heating across the entire glass surface. These plates are also equipped with a surface sensor, guaranteeing precise and accurate temperature measurements. The heated plates are compatible with various inverted microscope brands, providing support for a wide range of models available in the market. The plates are offer both metal and glass heating to cater to different preferences and requirements. The DragonTail glass used in the heated plates is chemically strengthened and further safeguarded by a sturdy aluminum frame, ensuring durability and protection.
Single unit
- 0.5 mm thick, scratch-resistant, break-resistant glass
- DragonTail Glass 10 years warranty against damage
- aluminum frame for increased rigidity
- Available in Metal heated and Glass Heated options
- All microscope types and rages
- Requires heating controller
-
The OKOLAB Heated Plate designed for stereo microscopes utilizes an Indium Tin Oxide (ITO) coating, which ensures consistent heating across the entire glass surface. These plates are equipped with a surface sensor, guaranteeing accurate and precise temperature measurements. The heated plates are compatible with various stereo microscope brands, supporting a wide range of models available in the market. The plates are offer both metal and glass heating to cater to different preferences and requirements. The glass used in the heated plates is chemically strengthened and further safeguarded by a sturdy aluminum frame, ensuring durability and protection.Single unit
- 1mm thick, scratch-resistant glass
- aluminum frame for increased rigidity
- Available in Metal heated and Glass Heated options
- All microscope types and rages
- Requires heating controller
-
The Okolab Heated Glass Table is a versatile heating solution. Its adjustable design ensures compatibility with a variety of microscopes. The table provides a flat and transparent surface with precise temperature controls. The temperature can be regulated from ambient levels up to 60°C. Please note, the heated glass table requires an OKOLAB Heating Controller for operation.Single unit
- 2.0 mm thick, scratch-resistant, break-resistant glass
- 10 years warranty against glass damage
- aluminum frame for increased rigidity
- All stereo microscope types and ranges
- OKOLAB Heating controller required
-
The OKOLAB H401-T-PAD is a versatile heated flat metal plate designed to convert any surface, such as a table top or cabinet work area, into a temperature-controlled environment. Available in three sizes - small (174x234 mm), medium (297x210 mm, A4 size), and large (420x300 mm, A3 size) - it provides flexibility to suit various workspace requirements. The H401-T-PAD operates in conjunction with either the H401-T-CONTROLLER or the H401-T-PENNY, enabling precise temperature control for optimal sample conditions. This tool is an ideal solution for laboratories seeking to create consistent, controlled temperature zones on existing work surfaces.Single unit
- Plate calibration can be performed in the lab by the operator
- Temperature range: 27 to 45°C
- Temperature sensor accuracy: ±0.1°C
- Temperature accuracy on specimen: ±0.3°C, after self calibration, if room temperature remains within ±1°C
-
The OKOLAB Leo is a comprehensive, handheld meter designed for IVF applications. This device is capable of assessing key environmental parameters such as CO2-O2 gas composition, temperature, relative humidity, and gas flow. It accomplishes this by using multiple sensor modules, ensuring accurate measurements within high-top and bench-top incubators. Leo can execute both single point measurements as well as extended time logging, storing all data in its local memory, providing versatile and thorough monitoring for all your IVF application needs. At the core of Leo's functionality is the standard-included CO2-O2 module. This module is embedded into the device and can be conveniently extracted and sent back to Okolab for recalibration, maintaining the integrity and precision of measurements. Leo offers an impressive storage capacity, with the ability to save and organize data from up to 40 different devices. This stored data, categorized by both date and device, can be accessed directly on Leo's clear and easy-to-read screen. In addition to immediate access, the device enables data downloading via a micro USB port. This data can be further examined and analyzed using the complimentary LEO DATA IMPORT Excel Macro, streamlining the interpretation of measurement results.Single unit
- Included CO2-O2-MODULE
- User-friendly touch screen interface
- Compatible with any incubator on the market
- Diffusion or Aspiration gas sampling modes
- Sampling tube and de-humidification kit included
- Long term logging and single point measurement
- USB OTG for data downloading to a USB flash drive
- Two external sensor connections to connect up to two optional sensor modules at the same time
- Software Update is available online so that LEO always has the latest software version
-
The OKOLAB Tri-Gas Mixer is a versatile and precise CO2-O2 controller, engineered for optimal control over gas concentrations and pressure. The system mixes CO2, air, and N2 to achieve desired concentrations from 0-10% for both CO2 and O2, and it can manage controlled pressure within the range of 0-2 barg (0-30 psig). An adjustable knob on the embedded pressure gauge allows users to easily regulate delivery pressure. To assure consistent composition, the Tri-Gas Mixer comes with a mixing tank that provides stability even with variable output flows. It features compatibility with any mini incubator on the market, demonstrating flexibility and adaptability to diverse lab environments. The system includes a CO2-O2-MODULE, housing the CO2 and O2 sensors, which deliver high accuracy volume concentration measurements. These sensors facilitate automatic fine-tuning of the output gas. The module is factory calibrated, with a calibration certificate included in electronic format. On-site calibration or module replacement are also options, both of which do not require the disconnection or turning off of the Tri-Gas Mixer. An added advantage of the Tri-Gas Mixer is its self-calibration procedure. This can be periodically carried out to maintain high accuracy, using a connected calibration gas that closely matches standard working condition concentrations. This procedure can also be manually initiated if needed, and does not interrupt the delivery of gas to connected incubators. Two configurations of the Tri-Gas Mixer are available, offering maximum output flow rates of 1.5 L/min and 15 L/min.- Automatic switch to backup cylinder upon alarm
- On board memory for data logging
- Auto calibration with an external calibration gas
- Contact closure alarm
- Auto diagnostic procedure
- VOC-IN-BYPASS (optional) : VOC filter's holder with bypass panel to saturate newly installed filters with CO2 before using them with the tri-gas mixture
-
Oosafe®’s 14 ml oocyte pick-up (OPU) tube has a dual position push-on cap to enable venting and to prevent sample loss and evaporation. Every lot of Oosafe® plasticware is tested to ensure the delivery of high-quality tubes that you can depend on for your IVF procedures.Multipack – Case of 500 (packaged in packs of 10 tubes)
- Easy push-on cap design
- Easy peel-open breathable packaging eliminates the need for off gassing prior to use
- Every lot assessed for one cell mouse embryo assay (MEA > 80% blastocyst), endotoxin testing (LAL < 0.03 EU/mL) and human sperm survival and motility testing (SMI > 0.75)
- Manufactured and sterilized in an ISO 9001 and ISO 13485 certified facility
- Made of medical grade USP VI tested raw materials
- Sterilized with gamma irradiation and CE marked
- 14 ml volume tube, minimum volume measure 0.1 ml
-
Oosafe®’s 15 ml centrifuge tube has a conical bottom and an etched measuring scale in 0.5 ml increments. Fitted with a tightly sealed twist-on cap, this centrifuge tube is suited to applications that require thermal and chemical stability. Every lot of Oosafe® plasticware is tested to ensure the delivery of high-quality tubes that you can depend on for your IVF procedures.Multipack – Case of 500 (packaged in packs of 10 tubes)
- Twist-cap technology
- Easy peel-open breathable packaging eliminates the need for off gassing prior to use
- Every lot assessed for one cell mouse embryo assay (MEA > 80% blastocyst), endotoxin testing (LAL < 0.03 EU/mL) and human sperm survival and motility testing (SMI > 0.75)
- Manufactured and sterilized in an ISO 9001 and ISO 13485 certified facility
- Made of medical grade USP VI tested raw materials
- Sterilized with gamma irradiation and CE marked
- 15 ml volume tube, minimum volume measured is 0.1 ml