• ZyMōt Sperm Separation Devices offer a better way to prepare sperm, one that avoids centrifugation. By separating sperm according to their mobility, each device selects the highest quality sperm with the lowest possible level of DNA fragmentation in a sample. These healthier sperm promote outcomes that matter to patients: improved progressive motility, a higher proportion of normal morphology, increased fertilization rates, and higher euploidy and pregnancy rates. ZyMōt can be used for both intracytoplasmic sperm injection (ICSI) and intrauterine insemination (IUI) procedures.

    10 devices / box

    • Selects the “Champions” – sperm with the lowest DNA fragmentation, highest motility, normal morphology, and low ROS
    • Available in two sizes: 850 µl and 3 ml
    • Clear instructions and simple standardized procedures improve reproducibility
    • Minimal training and no specialized equipment required
    • Improves lab efficiency. Requires only 5 minutes of total hands-on time per sample
    • Mitigates potential risk by shortening the chain of custody
    • Use ZyMōt to see immediate improvements in lab productivity and sample quality
    Select options This product has multiple variants. The options may be chosen on the product page Details
    Add to wishlist
    Add to wishlist
  • VitroMed V-DENUPET pipettes are used for removing cumulus cells prior to ICSI and IVF, and for handling oocytes and embryos during ART procedures. Engineered with German precision and manufactured under cleanroom conditions, V-DENUPET pipettes are among the most precise microtools available for manipulating and transferring oocytes and embryos.

    50 pipettes (5 vials of 10)

    • Oocyte and embryo denuding: 125 – 175 µm
    • Oocyte and embryo handling procedures: 200 - 600 µm
    • MEA and LAL tested
    • Gamma sterilized
    • Manufactured from high medical grade polymers
    • Flexible and easy to handle
    • Colour coded by size for easy identification
    Select options This product has multiple variants. The options may be chosen on the product page Details
    Add to wishlist
    Add to wishlist
  • VitroMed's V-SPERM MORPHO SLIDE is a pre-stained ready-to-use slide for staining human sperm. Each slide provides a pure and clear exposure of sperm anatomy during assessment of sperm morphology.

    10 slides / box

    • Pre-stained with cresyl violet acetate and methylene blue
    • Time and cost efficient
    • No preparation required, ready to use
    • Each box contains 10 slides and 10 cover slides
  • CellVision® slides are manufactured from cleaned coated non-toxic glass. Each disposable slide comes with or without an etched grid, has 2 or 4 separate counting chambers, as well as a fixed coverslip with 10, 12, 20 or 100 microns’ depth. The combination of specific chamber-depths and several built-in grid formats facilitate sperm motility assessments and contribute to accurate and reproducible semen analysis. Suitable for a variety of different human and veterinary applications, CellVision® slides eliminate time-consuming cleaning procedures and reduce the risk of exposure to infectious material.

    25 slides / box

    • Disposable
    • Made from cleaned and coated non-toxic glass
    • Colour-coded by format
    • Slides come with an identical image, dimensions and fitted counting grid as a re-usable hematocytometer
    • For use in human and veterinary semen analysis
    Select options This product has multiple variants. The options may be chosen on the product page Details
    Add to wishlist
    Add to wishlist
  • CELL-VU® Pre-stained Morphology slides provide clean and clear slides for rapid cellular visualization and differential cell assessment. Each slide contains a dried layer of stain that facilitates morphology assessment when in contact with cells. Samples are applied directly to the slide and a coverslip placed over the sample, reducing exposure to harmful external variables. CELL-VU® slides combine conventional microscope slides with a proprietary combination of methylene blue and cresyl violet stains into a single, ready-to-use device.

    75 slides/box

    • Used for the staining spermatozoa, blood, CSF, and urine for cytology
    • Disposable, reducing clinician’s unnecessary exposure to bodily fluids
    • One step process limits exposure to reagents and potentially harmful stains
    • Highly accurate results
    • Increases lab effectiveness by eliminating the need for cleaning
    • Used for World Health Organization and Kruger strict morphology sperm assessment from undiluted semen
  • VitroMed’s V-TRANSIN is a 1 ml single-use syringe used for controlled embryo transfer.

    100 individually packed, sterile syringes / box

    • Disposable
    • Unique medical grade silicone ring for airtight and controlled transfer
    • MEA and endotoxin tested
    • Latex and rubber free
    • 1 ml volume with luer connector
  • VitroMed V-MARKER PENs are used for labeling labware during ART procedures. Ideal for labelling dishes, tubes, straws and more.

    4 pens / box

    • Non-toxic and xylene-free
    • MEA and LAL tested
    • Ultra fine tip
    • Non-smearing and fast drying
    • Permanent
    • Available in black, red and blue
  • VitroMed’s V-GLASSPET is a disposable sterile glass Pasteur pipette designed for easy liquid handling. The type 1 version of this product is composed of soda lime glass and gamma sterilized.

    250 pipettes / box (10 sterile blister packs of 25 pipettes each)

    • Size: 5.75 inches / 150 mm or 9 inches / 230 mm
    • Plugged with sterile cotton
    • MEA and LAL tested
    • Safe for liquid handling
    • Gamma sterilized
    • Soda lime glass
    • Volume capacity: 2 ml
    Select options This product has multiple variants. The options may be chosen on the product page Details
    Add to wishlist
    Add to wishlist
  • Sunlight Medical Holding Pipettes are used to hold an oocyte or embryo in position during ICSI and other micromanipulation procedures. Sunlight’s micropipettes are hand-crafted to exacting standards, individually examined for quality assurance, fully traceable, and packaged in colour-coded cases for easy visual identification. The micropipettes are available in a range of configurations, with various options for inner diameter, outer diameter, and tip angle. All pipettes have an elbow length of 0.65 mm.

    10 pipettes / box

    • Each pipette is handmade and individually inspected
    • History of each pipette, from manufacturing to inspection, is logged for quality assurance
    • 2-cell MEA and endotoxin tested
    • Convenient colour-coded pipette safe cases
    • Gamma irradiated
    • Available with inner diameters as small as 10 μm through to larger 25-30 μm
    • All holding pipettes have an elbow length of 0.65 mm
    • Tip angles available in 0° - 45° with the most common formats being 30° or 35°.
    Select options This product has multiple variants. The options may be chosen on the product page Details
    Add to wishlist
    Add to wishlist
  • Sunlight Medical ICSI Injection Pipettes are used to perform intracytoplasmic sperm injection (ICSI). Designed by experts in the field of assisted reproduction technology (ART), these pipettes feature a unique shape and taper that ensures the smooth control of sperm for loading and injection. The spike at the tip is short, sharp, and fine, to allow for easy, non-traumatizing penetration of oocytes. Several sperm can be loaded at one time for the injection of multiple oocytes. Pipettes are offered in a variety of tip, angle, and length configurations.

    10 pipettes / box

    • Each pipette is handmade and individually inspected
    • History of each pipette, from manufacturing to inspection, is logged for quality assurance
    • 2-cell MEA and endotoxin tested
    • Convenient colour-coded pipette safe cases
    • Gamma irradiated
    • Inner diameter sizes of 4.0 – 4.5 μm, 5 – 5.0 μm and 5.0 – 5.5 μm available
    • Tip angles available in 0° – 45° with the most common formats being 30°or 35°
    • Spiked (Series V, H & W) or non-spiked (Series T) tips
    Select options This product has multiple variants. The options may be chosen on the product page Details
    Add to wishlist
    Add to wishlist
  • Blastomere biopsy pipettes are used to remove blastomeres and trophectoderm cells from embryos for pre-implantation genetic diagnosis (PGD). Sunlight’s pipettes are manufactured to the exacting standards of consistency, precision, and reliability that the company is known for.

    10 pipettes / box

    • 2-cell MEA tested and endotoxin tested
    • Convenient colour-coded pipette safe cases
    • Available in either a flat or beveled tip
    • Inner diameter sizes of 20 µm, 25 µm, 30 µm, 35 µm, and 40 µm, with 20 µm and 25 µm recommended for trophectoderm (TE) biopsy
    • Tip angles available in 0° - 45° with the most common formats being 30° or 35°
    • Elbow length of 0.55 mm
    • No shrinkage at the bend of the pipette, reducing likelihood of damage to the blastomere if it is sucked through the pipette
    • Tips are fire polished to reduce damage to the cell membrane
    Select options This product has multiple variants. The options may be chosen on the product page Details
    Add to wishlist
    Add to wishlist
  • MFC Global’s SpermVD is an innovative, efficient medical device for cryopreservation of small numbers of spermatozoa. It allows quick and convenient vitrification of spermatozoa, from a single sperm cell to thousands, and is specifically designed for cases of azoospermia, crypto azoospermia, oligo azoospermia and urgent male fertility preservation. SpermVD is best used for patients with extremely low numbers of spermatozoa, either in their ejaculate or following testicular biopsy (TESE). A simple thawing process enables quick retrieval of sperm with minimal sperm loss. Sperm may be used immediately for ICSI post-thaw with the SpermVD device.

    25 units / box

    • Sperm viability and function maintained, maximizing fertility preservation for men
    • Minimal post-thaw sperm loss
    • Fits a standard ICSI dish or cryovial
    • Can be used with the SpermVD DISH to provide increased stability
    • 3 wells for individual sperm storage
    • 96% post-warm retrieval rate, facilitated by storage in 1 µl drops
    • Allows uncoupling of sperm retrieval from ovum pick-up, minimizing the need for oocyte freezing
    • Different gripping positions for easy handling
    • Injection molded from a medical grade polycarbonate and sterilized by gamma irradiation
  • MFC Global’s SpermVD DISH is a 60mm-wide Petri dish containing a niche-like indentation specifically designed to fit the SpermVD device. The niche brings the SpermVD to the same focal plane as the surface of the SpermVD DISH, providing stability and eliminating the need to adjust the height of the micromanipulator arm. The location of the niche near the perimeter also leaves enough room for a standard ICSI layout, enabling retrieved spermatozoa to be injected immediately.

    25 units / box

    • Specially designed to provide superior stability when using the SpermVD device, to facilitate low-count sperm vitrification
    • The SpermVD DISH’s niche prevents the SpermVD device shifting when moved
    • Niche also allows SpermVD device to rest at the same focal plane as the surface of the SpermVD DISH, eliminating the need to adjust the height of the micromanipulator arm
    • Suitable for ICSI
    • CE marked
    • MEA tested
  • The Kitazato Cryotop® is a vitrification device for use in the storage of human oocytes and embryos. The device itself consists of a fine strip of transparent film attached to a plastic handle. Specimens with a minimum volume of 0.1 µl can be loaded into the device for vitrification. Cooling and warming rates of -23,000 ºC/minute and 42,000 ºC/minute respectively can be achieved by using the Cryotop® device, leading to superior oocyte and embryo survival rates.

    10 units / pack

    • Wider sheet for easy loading of specimens on the straw
    • Thin strip maximizes temperature exposure of specimens during cooling and warming
    • Diamond tip allows for easy insertion into the cover straw and handle is nitrogen-resistant
    • Identification marks define which side to load specimens, and enable quick identification during thawing
    • Up to four specimens can be loaded per device without impacting survival or reproductive potential
    • Small device size maximizes storage space in cryo-tanks
    • Available in five colours for easy identification
    • SAL, endotoxin and MEA tested
    Select options This product has multiple variants. The options may be chosen on the product page Details
    Add to wishlist
    Add to wishlist
  • Kitazato cooling and warming vitrification media is a versatile option for cryopreservation of oocytes and embryos in all stages of development – from oocyte to blastocyst stage. VT601 Vitrification Cooling media consists of:
    • 5 ml Basic Solution vial (BS)
    • 5 ml Equilibrated Solution vial (ES)
    • 2 x 1.5 ml Vitrification Solution vial (VS)
    VT602 Vitrification Warming media consists of:
    • 2 x 4 ml Thawing Solution vial (TS)
    • 4 ml Diluent Solution vial (DS)
    • 4 ml Washing Solution vial (WS)

    Features:

    • Works for vitrification and warming of oocytes and embryos, helping to standardize procedures and optimize lab efficiency
    • Works effectively at room temperature, preserving the cell membrane
    • Media contains hydroxypropyl cellulose (HPC) to decrease the risk of contamination, increase survival rate in hatched blastocysts and reduce mechanical stress
    • Trehalose replaces sucrose as an osmotic agent, providing greater protection of the cellular membranes
    • Media also contains DMSO and ethylene glycol, providing decreased toxicity and increasing viability after warming
    • Endotoxin and MEA tested
    • Sterile
    Select options This product has multiple variants. The options may be chosen on the product page Details
    Add to wishlist
    Add to wishlist
  • Kitazato Cooling Rack

    $64.99$235.99
    Kitazato’s state-of-the-art cooling rack is designed to hold liquid nitrogen during vitrification procedures. Available in two separate sizes to best suit your needs, the cooling rack is combined with a stainless-steel interior insert which can be sterilized. Optional lids for the cooling rack to prevent liquid nitrogen from evaporating are available separately.

    1 unit, optional lid sold separately

    • Small cooling rack is ideal for conservative use of liquid nitrogen (20 X 11 X 11 cm).
    • Large cooling rack allows for improved handling of vitrification devices (34 X 12.5 X 11 cm).
    • Stainless steel interior container allows for easy sterilization prior to use.
    Select options This product has multiple variants. The options may be chosen on the product page Details
    Add to wishlist
    Add to wishlist
  • BRED Life Science’s SpermFunc® DNAf is a quick and easy-to-use test kit designed to evaluate the degree of sperm DNA fragmentation using sperm chromatin dispersion (SCD) protocols. This kit allows for controlled sperm denaturation and removal of proteins, resulting in easy identification of normal spermatozoa by their glowing ‘halos’ which are absent in sperm cells with damaged DNA. Test results can support the analysis of pathogenesis in cases of infertility, natural abortion, and inactive embryo development.

    40 tests / box

    • Simple, quick, and reproducible results with optimized SCD protocols
    • Produces highly contrasted halo images that are easy to interpret
    • Results can be viewed under the microscope - no need for complex laboratory equipment
    • Tests can be completed within one hour
    • Reagents have a two-year shelf-life
  • BRED Life Science’s SpermFunc® Morphology staining kit uses the quick and easy Diff-Quik method, recommended by the WHO, to quantitatively evaluate normal versus abnormal spermatozoa morphology in semen samples. Air-dried smears can be stained within seconds, allowing for rapid counting and evaluation of specimen morphology using only a regular microscope. Each kit includes two dyes and a fixative solution.

    3 X 100 ml/kit OR 3 X 500 ml/kit

    • Simple, reliable, and reproducible method for better quality control
    • Possible for staining to be completed in a special slide barrel, for ease and simplicity
    • Instant results with previously prepared slides to evaluate sperm morphology
    • Results can be viewed under a microscope without the need for other special equipment
    • Reagents are stable and reliable, with a two-year shelf life
    Select options This product has multiple variants. The options may be chosen on the product page Details
    Add to wishlist
    Add to wishlist
  • The SpermFunc® Vitality Kit by BRED Life Science is an assessment tool for the measurement and characterization of healthy, motile sperm in a semen sample. It works by identifying spermatazoa with or without altered membranes. Healthy sperm with intact cell membranes repel the eosin-nigrosin test stain, identifying the ‘dead’ or nonviable sperm with permeable membranes in samples. For samples with low motility, this kit can be used to differentiate between live and dead sperm cells, or to verify the membrane structure and integrity of immotile sperm.

    150 tests / kit

    • Simple, reliable, and reproducible method of assessing sperm vitality
    • Instant results
    • No need for special equipment - can be viewed using a standard microscope or phase contrast microscopy
    • Black background provides better contrast for viewing
  • The Oosafe® Cryoware series is designed to make embryologists’ and biologists’ daily routine faster, easier, and safer. Oosafe® Canes are designed to safely store both cryovials and straws in visotubes. Combined with Oosafe® Tags and Visotubes, embryologists can create colour combinations to differentiate individual patient samples stored within the same LN2 tanks, minimizing potential errors. Oosafe® Canes are manufactured from aluminum, making them light, durable, and safe to use for IVF.

    50 pcs / pack

    • Three different formats to suit your specific laboratory needs: Canes for 1-2 ml cryovials, 13 mm diameter visotubes and 12 mm diameter visotubes
    • Built in security shelves to secure samples
    • Made of anodized aluminum, making them suitable for IVF and other cryo applications
    Select options This product has multiple variants. The options may be chosen on the product page Details
    Add to wishlist
    Add to wishlist
  • The Oosafe® Cryoware series is designed to make embryologists’ and biologists’ daily routines faster, easier, and safer. Oosafe® non-printed tabs can be used to create variety of unique colour-coded identifiers for patient samples when combined with visotubes and Oosafe® canes. The tags are made of aluminum, making them suitable for cryopreservation of oocytes, embryos, and sperm. Available in nine colours.

    50 pcs / pk

    • Made of aluminum to provide safe identification for IVF and other cryo applications
    • Provide a wide variety of colour combinations as unique sample identifiers when used with other Cryoware products
    • 10 clearly distinct colours available
    Select options This product has multiple variants. The options may be chosen on the product page Details
    Add to wishlist
    Add to wishlist
  • Oosafe’s® Transparent Sleeves enclose and provide extra security for cryocanes during handling and storage. Made of durable plastic, the slightly smaller diameter of Oosafe’s® sleeves allows more canes to be stored per canister when compared to other brands. The sleeve’s transparency allows for easy visual identification of samples when combined with the Tags in the Oosafe® Cryoware series, minimizing possible errors. Oosafe® sleeves for cryocanes are compatible with both 12 mm and 13 mm diameter visotubes.

    100 pcs / case

    • Clear plastic sleeves protect samples inside aluminum canes during handling and storage
    • Safe for cryogenic freezing
    • More durable than cardboard sleeves
    • Transparency allows sample identification without removing the sleeve
    Select options This product has multiple variants. The options may be chosen on the product page Details
    Add to wishlist
    Add to wishlist
  • ASTEC 6-month Filter

    $38.99$1,174.99
    It is crucial for successful IVF laboratories to maintain quality and control. The 6-month filter by ASTEC is an inline gas filter that utilizes a unique micro-carbon technology with a large, activated carbon surface area. This technology ensures uniform gas flow and high purification. Filters are placed between CO2 gas sources and incubators to purify incoming CO2, N2, and premixed gas against chemically active compounds (CACs), volatile organize compounds (VOCs), microorganisms, and other harmful compounds and particles. Accessories include magnetic mount that allow filters to be securely fastened to equipment and filter connectors for 8mm tubing.

    Multipack (case of 4 individually packed filters)

    • Each filter is produced in a cleanroom in a fully controlled environment and pressure tested to ensure high product safety and effectiveness
    • Removes VOCs, CACs, microorganisms, dust, and other particles
    • Combination of activated carbon granules, HEPA filter and pre-filters ensures high VOC removal capacity and traps particles (H14 efficiency ≥ 99.995%)
    • Manufactured without the use of chemicals to ensure safe embryo development
    • Filters have been used globally for many years in renowned IVF clinics as the main gas purification tool
    Select options This product has multiple variants. The options may be chosen on the product page Details
    Add to wishlist
    Add to wishlist
  • Oosafe® 4-Well Dishes

    $511.99$606.99
    Oosafe®’s 4-well dishes feature a cut-corner design to ensure proper orientation, improved handling and to prevent errors during use. Oosafe’s exacting standards for quality mean every lot is tested, ensuring the provision of consistent, high-quality performance for your laboratory. 4-well dishes are available with both treated and non-treated surfaces. The treated dish provides an even hydrophilic surface and concave meniscus for superior drop attachment and cell culture. The non-treated dish provides a hydrophobic surface with a convex meniscus.

    Multipack – case of 120 (packaged in 4-dish sleeves)

    • Superior thermal transfer from heated stages
    • Easy grip design for safer transfer with a designated label area
    • Clear microscopic imaging
    • Easy peel-open breathable packaging eliminates the need for off gassing prior to use
    • Every lot assessed for one cell mouse embryo assay (MEA ≥ 80 % blastocyst), endotoxin testing (LAL ≤ 0.03 EU/mL) and human sperm survival and motility testing (SMI ≥ 0.75)
    • Available as both treated and non-treated
    • Manufactured and sterilized in an ISO 9001 and ISO 13485 certified facility
    • Made of medical grade USP VI tested raw materials
    • Sterilized with gamma irradiation and CE marked
    • 1.8 ml well volume, 7 ml volume between wells
    Select options This product has multiple variants. The options may be chosen on the product page Details
    Add to wishlist
    Add to wishlist
Go to Top