Shop - Fertitech

ZyMōt Multi Sperm Separation Devices

$934.99
ZyMōt Sperm Separation Devices offer a better way to prepare sperm, one that avoids centrifugation. By separating sperm according to their mobility, each device selects the highest quality sperm with the lowest possible level of DNA fragmentation in a sample. These healthier sperm promote outcomes that matter to patients: improved progressive motility, a higher proportion of normal morphology, increased fertilization rates, and higher euploidy and pregnancy rates. ZyMōt can be used for both intracytoplasmic sperm injection (ICSI) and intrauterine insemination (IUI) procedures.
10 devices / box

Selects the “Champions” – sperm with the lowest DNA fragmentation, highest motility, normal morphology, and low ROS

Available in two sizes: 850 µl and 3 ml

Clear instructions and simple standardized procedures improve reproducibility

Minimal training and no specialized equipment required

Improves lab efficiency. Requires only 5 minutes of total hands-on time per sample

Mitigates potential risk by shortening the chain of custody

Use ZyMōt to see immediate improvements in lab productivity and sample quality
Select options This product has multiple variants. The options may be chosen on the product page Details

Add to wishlist

Add to wishlist
VitroMed V-TRANSIN Single-Use 1 ml Transfer Syringe

$81.99
VitroMed’s V-TRANSIN is a 1 ml single-use syringe used for controlled embryo transfer.
100 individually packed, sterile syringes / box

Disposable

Unique medical grade silicone ring for airtight and controlled transfer

MEA and endotoxin tested

Latex and rubber free

1 ml volume with luer connector
Add to cart Details

Add to wishlist

Add to wishlist
VitroMed V-Sperm Morpho Slide

$42.99
VitroMed's V-SPERM MORPHO SLIDE is a pre-stained ready-to-use slide for staining human sperm. Each slide provides a pure and clear exposure of sperm anatomy during assessment of sperm morphology.
10 slides / box

Pre-stained with cresyl violet acetate and methylene blue

Time and cost efficient

No preparation required, ready to use

Each box contains 10 slides and 10 cover slides
Add to cart Details

Add to wishlist

Add to wishlist
VitroMed V-MARKER PEN

$47.99
VitroMed V-MARKER PENs are used for labeling labware during ART procedures. Ideal for labelling dishes, tubes, straws and more.
4 pens / box

Non-toxic and xylene-free

MEA and LAL tested

Ultra fine tip

Non-smearing and fast drying

Permanent

Available in black, red and blue
Add to cart Details

Add to wishlist

Add to wishlist
VitroMed V-GLASSPET Sterile Pasteur Pipettes Type 1

$219.99
VitroMed’s V-GLASSPET is a disposable sterile glass Pasteur pipette designed for easy liquid handling. The type 1 version of this product is composed of soda lime glass and gamma sterilized.
250 pipettes / box (10 sterile blister packs of 25 pipettes each)

Size: 5.75 inches / 150 mm or 9 inches / 230 mm

Plugged with sterile cotton

MEA and LAL tested

Safe for liquid handling

Gamma sterilized

Soda lime glass

Volume capacity: 2 ml
Select options This product has multiple variants. The options may be chosen on the product page Details

Add to wishlist

Add to wishlist
VitroMed V-DENUPET Microtools for Denuding and Pipetting Embryos and Oocytes

$266.99
VitroMed V-DENUPET pipettes are used for removing cumulus cells prior to ICSI and IVF, and for handling oocytes and embryos during ART procedures. Engineered with German precision and manufactured under cleanroom conditions, V-DENUPET pipettes are among the most precise microtools available for manipulating and transferring oocytes and embryos.
50 pipettes (5 vials of 10)

Oocyte and embryo denuding: 125 – 175 µm

Oocyte and embryo handling procedures: 200 - 600 µm

MEA and LAL tested

Gamma sterilized

Manufactured from high medical grade polymers

Flexible and easy to handle

Colour coded by size for easy identification
Select options This product has multiple variants. The options may be chosen on the product page Details

Add to wishlist

Add to wishlist
VitroMED V-Denupet Handle

$499.99
The VitroMED V-DENUPET HANDLE is adjustable up to a volume of 3 µl for all denudation pipettes. The optional grip enables an easy handling for the daily laboratory routine.
Single unit – 1 micropipettor

Smooth and responsive plunger making it ideal for daily lab routine

Ergonomic design

Fits Strip-ID micropipettes and most other popular plastic micropipettes (Æ9 mm OD)

Adjustable aspiration volume (min » 0.2 ml, max » 3 ml)

Total expulsion feature

Stainless steel table holder and spare parts kit with extra seals, plunger wire and hexagon key included
Add to cart Details

Add to wishlist

Add to wishlist
VitroMed V-CARE SteriControl (20ml)
V–CARE SteriControl enables an easy control of the aseptic working environment and medium handling. The product enables an unmatched level of control over the sterile liquid handling processes used in ART. Use V–CARE SteriControl as an as indicator of workplace sterility or bioburden or to evaluate contamination of culture and handling media.
20 ml bottle

Growth promotion tested

Sterility confirmed

Shelf life 12 months from date of production

20 ml glass and PETG bottle
Details

Add to wishlist

Add to wishlist
VitroMed Sperm Collection Cup

$219.99
VitroMed's sperm collection cup is has a 100ml capacity with graduations up to 90ml. The cup features a blue screw-cap lid for secure sample storage.
Case of 300 (packaged in individual soft blister packs)

100ml cup volume

Individually packed to protect from scratches and contamination

Assessed for one cell mouse embryo assay (MEA ≥ 80 % blastocyst), endotoxin testing, and human sperm survival and motility testing (SMI ≥ 0.70)

Manufactured from USP Class 6 standard polymers (virgin polystyrene)

Cleanroom manufactured
Add to cart Details

Add to wishlist

Add to wishlist
VitroMed Serological Pipets

$84.99 – $93.99
Serological pipettes are laboratory tools used in various scientific applications to transfer precise volumes of liquid. VitroMed's pipettes are composed of virgin polystyrene with excellent optical properties and are available in 1ml, 5ml, and 10ml sizes. They feature colour coding for easy visual differentiation and clear printed graduations. All VitroMed plasticware is manufactured to exacting German standards of precision in cleanroom conditions and individually packaged to prevent scratches and contamination.
Multipack – Case of 200 or 300 (packaged in individual soft blister packs)

Printed +/- graduations

Assessed for one cell mouse embryo assay (MEA ≥ 80 % blastocyst), endotoxin testing, and human sperm survival and motility testing (SMI ≥ 0.70)

Composed of virgin polystyrene with excellent optical properties (USP class 6)

Cleanroom manufactured
Select options This product has multiple variants. The options may be chosen on the product page Details

Add to wishlist

Add to wishlist
VitroMed Multi-Purpose 90mm Culture Dishes

$302.99
VitroMed's multi-purpose 90mm dishes can be utilized for a range of applications including, but not limited to, cell culture, oocyte collection, and microscopy. All Vitromed dishes are manufactured to exacting German standards of precision in cleanroom conditions and are individually packaged to prevent scratches and contamination.
Multipack – case of 300 (packaged in individual soft blister packs)

Individually packaged in soft blisters

Composed of clear virgin polystyrene with excellent optical properties

Assessed for one cell mouse embryo assay (MEA ≥ 80 % blastocyst), endotoxin testing, and human sperm survival and motility testing (SMI ≥ 0.70)

Cleanroom manufactured
Add to cart Details

Add to wishlist

Add to wishlist
VitroMed Multi-Purpose 60mm Culture Dishes

$295.99
VitroMed's versatile 60mm dishes are designed for various uses, such as cell culture, oocyte collection, and microscopy. Each Vitromed dish is produced under stringent German precision standards in cleanroom environments and comes individually packaged to protect against scratches and contamination.
Multipack – case of 300 (packaged in individual soft blister packs)

Individually packaged in soft blisters

Composed of clear virgin polystyrene with excellent optical properties

Assessed for one cell mouse embryo assay (MEA ≥ 80 % blastocyst), endotoxin testing, and human sperm survival and motility testing (SMI ≥ 0.70)

Cleanroom manufactured
Add to cart Details

Add to wishlist

Add to wishlist
VitroMed Multi-Purpose 35mm Culture Dishes

$259.99
VitroMed's multi-purpose dishes are available in 35 mm, 60 mm, and 90 mm sizes. These dishes can be utilized for a range of applications including, but not limited to, cell culture, oocyte collection, and microscopy. All Vitromed dishes are manufactured to exacting German standards of precision in cleanroom conditions and are individually packaged to prevent scratches and contamination.
Multipack – case of 300 (packaged in individual soft blister packs)

Individually packaged in soft blisters

Composed of clear virgin polystyrene with excellent optical properties

Assessed for one cell mouse embryo assay (MEA ≥ 80 % blastocyst), endotoxin testing, and human sperm survival and motility testing (SMI ≥ 0.70)

Cleanroom manufactured
Add to cart Details

Add to wishlist

Add to wishlist
VitroMed ICSI Dish

$397.99
VitroMed's 50 ml dishes are ideal for micro-manipulation procedures such as ICSI, sperm selection, and embryo biopsy. These dishes are composed of clear virgin polystyrene with excellent optical properties. All VitroMed dishes are manufactured to exacting German standards of precision in cleanroom conditions and are individually packaged to prevent contamination.
Multipack – case of 300 (packaged in individual soft blister packs)

Individually packed to protect from scratches and contamination

Assessed for one cell mouse embryo assay (MEA ≥ 80 % blastocyst), endotoxin testing, and human sperm survival and motility testing (SMI ≥ 0.70)

Manufactured from USP Class 6 standard polymers (virgin polystyrene)

Cleanroom manufactured
Add to cart Details

Add to wishlist

Add to wishlist
VitroMed Center-Well Dish

$346.99
VitroMed’s center-well dishes are multi-purpose dishes for use in fertilisation, cryo-procedures, embryo culture and embryo transfer. Each center-well dish features two outer compartments and a 360° grip to improve handling. These dishes are manufactured from virgin polystyrene wish excellent optical properties for superior microscopy. All VitroMed dishes are manufactured to exacting German standards of precision in cleanroom conditions and are individually packaged to prevent scratches and contamination.
Multipack – case of 300 (packaged in individual soft blister packs)

Radiation sterilized

Multi-purpose, designed for a wide range of applications

Excellent optical properties

Every lot assessed for one cell mouse embryo assay (MEA > 80% blastocyst), endotoxin testing (LAL < 0.03 EU/mL) and human sperm survival and motility testing (SMI > 0.75)

Individually packaged to protect against scratches and contamination

Cleanroom manufactured
Add to cart Details

Add to wishlist

Add to wishlist
VitroMed 5 ml Round Insemination Tube

$152.99
VitroMed's 5 ml multi-purpose rounded tube has a variety of uses in the laboratory. The dual position push-on cap enables venting and prevents sample loss and evaporation. All VitroMed plasticware is manufactured to exacting German standards of precision in cleanroom conditions and is individually packaged to prevent scratches and contamination.
Multipack – Case of 500 (packaged in individual soft blister packs)

Printed graduations

Dual position snap-cap

Assessed for one cell mouse embryo assay (MEA ≥ 80 % blastocyst), endotoxin testing, and human sperm survival and motility testing (SMI ≥ 0.70)

Cleanroom manufactured

Individually packaged to protect against scratches and contamination

5 ml volume tube, minimum volume measured at 0.5 ml
Add to cart Details

Add to wishlist

Add to wishlist
VitroMed 4-Well Dish

$356.99
Vitromed’s 4-well dishes feature a cut-corner design and numbered corners to ensure proper orientation, improved handling, and to prevent errors during use. All VitroMed dishes are manufactured to exacting German standards of precision in cleanroom conditions and are individually packaged to prevent contamination.
Multipack – case of 200 (packaged in individual soft blister packs)

Flat-bottomed dish

1.8 mL volume

Excellent optical properties

Numbered corners

Assessed for one cell mouse embryo assay (MEA ≥ 80 % blastocyst), endotoxin testing, and human sperm survival and motility testing (SMI ≥ 0.70)

Individually packaged to protect against scratches and contamination

Cleanroom manufactured

Particle-free
Add to cart Details

Add to wishlist

Add to wishlist
VitroMed 2mL CryoVials

$356.99
VitroMed's cryovials are designed for cryopreservation and feature a flat bottom specially designed for use in cryogenic racks and trays. They feature a screwcap with a silicon ring to ensure a secure seal when closed.
Case of 1000 (packaged in bags of 50)

2ml capacity

Polypropylene tube designed to withstand temperatures as low as -196°C
Printed graduations and white label area

Assessed for one cell mouse embryo assay (MEA ≥ 80 % blastocyst), endotoxin testing, and human sperm survival and motility testing (SMI ≥ 0.70)

Manufactured from USP Class 6 standard polymers (virgin polystyrene)

Cleanroom manufactured
Add to cart Details

Add to wishlist

Add to wishlist
VitroMed 15 ml Conical Tube

$280.99
VitroMed's 15ml centrifuge tube has a conical bottom and printed graduations with a white area for labelling. A screw-on cap prevents leakage, and the tubes are composed of virgin polystyrene with excellent optical properties. All VitroMed plasticware is manufactured to exacting German standards of precision in cleanroom conditions and these tubes are individually packaged to prevent scratches and contamination.
Multipack – Case of 500 (packaged in individual soft blister packs)

Twist-cap technology

Easy peel-open breathable packaging eliminates the need for off gassing prior to use

Assessed for one cell mouse embryo assay (MEA ≥ 80 % blastocyst), endotoxin testing, and human sperm survival and motility testing (SMI ≥ 0.70)

Individually packaged to protect against scratches and contamination

Cleanroom manufactured

Particle-free
Add to cart Details

Add to wishlist

Add to wishlist
VitroMed 14 ml Round OPU Tube

$203.99
VitroMed’s 14 ml rounded tube has a dual position push-on cap to enable venting and to prevent sample loss and evaporation. All VitroMed plasticware is manufactured to exacting German standards of precision in cleanroom conditions and individually packaged to prevent scratches and contamination.
Multipack – Case of 500 (packaged in individual soft blister packs)

Printed graduations

Dual position snap-cap

Assessed for one cell mouse embryo assay (MEA ≥ 80 % blastocyst), endotoxin testing, and human sperm survival and motility testing (SMI ≥ 0.70)

Composed of virgin polystyrene with excellent optical properties (USP class 6)

Cleanroom manufactured
Add to cart Details

Add to wishlist

Add to wishlist
VitaVitro Well of the Well (WOW) Culture Dish
The VitaVitro Well of the Well (WOW) Culture Dish offers an advanced solution for the cultivation of embryos from fertilization to the blastocyst stage. It's specifically designed to mimic a three-dimensional in vitro environment for embryos, maximizing their development potential. The dish features conical microwells that simulate conditions in the oviduct, providing an optimal microenvironment for embryo growth. The microwells' unique inverted sugar-loaf shape facilitates dilution of waste materials while enhancing the concentration of crucial autocrine and paracrine factors. Additionally, the dish includes flat-bottom microwells for individual microscopic evaluation or Time-Lapse follow-up. Two extra wells are incorporated for embryo holding or washing before transfer or cryopreservation. The dish is crafted with a jagged-edge design to ensure secure handling and minimize the risk of accidental drops or spillages. VitaVitro's WOW Culture Dish is highly adaptable, offering flexible workflows that cater to the unique requirements of individual patients, embryos, and clinical staff members. This innovative design has been demonstrated to improve the likelihood of embryo development to the blastocyst stage by day six, contributing to the success of IVF procedures.
Multipack (pack of 5)

Advanced Design: Offers a 3D in vitro environment for embryo development.

Optimized Microenvironment: Conical microwells mimic oviduct conditions, enhancing necessary factors for development.

Time-Lapse Support & Secure Handling: Supports individual microscopic evaluation and Time-Lapse follow-up. Jagged-edge design ensures safe handling.

Flexible Workflows: Extra wells for embryo holding/washing and varying microwell configurations cater to different needs.
Details

Add to wishlist

Add to wishlist
VitaVitro Cooling Box
The VitaVitro Cooling Box is a specialized liquid nitrogen container designed for the secure fixing and transfer of storage containers during the vitrification or warming of gametes or embryos. Recommended for use in conjunction with the VitaVitro Straw Set, this cooling box prioritizes safety and portability. The tank can be sterilized prior to use, aiding in the reduction of potential contamination. The cooling box's durable, compact design and well-structured box includes a shelf specifically for straws, ensuring optimal cryogenic properties. Additionally, the cover plate is designed to effectively minimize the volatilization of liquid nitrogen. For added convenience, the shelf can be adjusted to meet individual usage requirements.
Single unit

Safety & Portability: Designed for secure handling and ease of transport during the vitrification or warming of gametes or embryos.

Liquid Nitrogen-Saving: The box's design, complete with a cover plate, effectively slows the volatilization of liquid nitrogen.

Adjustable Shelf: Includes a straw shelf that can be adjusted to meet individual usage requirements.
Details

Add to wishlist

Add to wishlist
Tokai Hit TPiE-SGX Mini Glass Heater for Slides

$1.00
The Tokai Hit TPiE-SGX Mini Glass Heater for Slides is a microscope stage thermocontrol system designed to provide consistent and precise temperature regulation of samples during microscopic observation. With its compact controller, the system is tailored for space efficiency, making it suitable for use in clean benches. The device features a user-friendly calibration process, allowing for simple adjustments using just a fingertip, facilitating easier adaptation to various environments.
Single unit

Compact controller design

Easy calibration

10 year warranty against glass breakage
Add to cart Details

Add to wishlist

Add to wishlist
Tokai Hit Heated Vitrification Glass Table
The Tokai Hit Heated Plates designed for inverted microscopes utilize an Indium Tin Oxide (ITO) coating, which ensures consistent heating across the entire glass surface. These plates are equipped with a surface sensor, guaranteeing precise temperature measurements with utmost accuracy. The heated plates are compatible with various inverted microscope brands, providing support for a wide range of models available in the market. The plates are offer both metal and glass heating to cater to different preferences and requirements. Moreover, the glass used in the heated plates is chemically strengthened and further safeguarded by a sturdy aluminum frame, ensuring durability and protection. This Tabletop is designed with a sliding glass plate adaptor, and 2 Glass plates: one can be heated, and one can be kept at room temperature. Sliding the plate would allow switching from a warmed area to a non-warmed area on top of the microscope lightsource and objective.
Single unit

0.5 mm thick, scratch-resistant, break-resistant glass

10 years warranty against glass damage

aluminum frame for increased rigidity

Available in Glass Heated options

All stereo microscope types and ranges

Heating controller included
Details

Add to wishlist

Add to wishlist