• ZyMōt Sperm Separation Devices offer a better way to prepare sperm, one that avoids centrifugation. By separating sperm according to their mobility, each device selects the highest quality sperm with the lowest possible level of DNA fragmentation in a sample. These healthier sperm promote outcomes that matter to patients: improved progressive motility, a higher proportion of normal morphology, increased fertilization rates, and higher euploidy and pregnancy rates. ZyMōt can be used for both intracytoplasmic sperm injection (ICSI) and intrauterine insemination (IUI) procedures.

    10 devices / box

    • Selects the “Champions” – sperm with the lowest DNA fragmentation, highest motility, normal morphology, and low ROS
    • Available in two sizes: 850 µl and 3 ml
    • Clear instructions and simple standardized procedures improve reproducibility
    • Minimal training and no specialized equipment required
    • Improves lab efficiency. Requires only 5 minutes of total hands-on time per sample
    • Mitigates potential risk by shortening the chain of custody
    • Use ZyMōt to see immediate improvements in lab productivity and sample quality
    Select options This product has multiple variants. The options may be chosen on the product page Details
    Add to wishlist
    Add to wishlist
  • VitroMed’s V-TRANSIN is a 1 ml single-use syringe used for controlled embryo transfer.

    100 individually packed, sterile syringes / box

    • Disposable
    • Unique medical grade silicone ring for airtight and controlled transfer
    • MEA and endotoxin tested
    • Latex and rubber free
    • 1 ml volume with luer connector
  • VitroMed's V-SPERM MORPHO SLIDE is a pre-stained ready-to-use slide for staining human sperm. Each slide provides a pure and clear exposure of sperm anatomy during assessment of sperm morphology.

    10 slides / box

    • Pre-stained with cresyl violet acetate and methylene blue
    • Time and cost efficient
    • No preparation required, ready to use
    • Each box contains 10 slides and 10 cover slides
  • VitroMed V-MARKER PENs are used for labeling labware during ART procedures. Ideal for labelling dishes, tubes, straws and more.

    4 pens / box

    • Non-toxic and xylene-free
    • MEA and LAL tested
    • Ultra fine tip
    • Non-smearing and fast drying
    • Permanent
    • Available in black, red and blue
  • VitroMed’s V-GLASSPET is a disposable sterile glass Pasteur pipette designed for easy liquid handling. The type 1 version of this product is composed of soda lime glass and gamma sterilized.

    250 pipettes / box (10 sterile blister packs of 25 pipettes each)

    • Size: 5.75 inches / 150 mm or 9 inches / 230 mm
    • Plugged with sterile cotton
    • MEA and LAL tested
    • Safe for liquid handling
    • Gamma sterilized
    • Soda lime glass
    • Volume capacity: 2 ml
    Select options This product has multiple variants. The options may be chosen on the product page Details
    Add to wishlist
    Add to wishlist
  • VitroMed V-DENUPET pipettes are used for removing cumulus cells prior to ICSI and IVF, and for handling oocytes and embryos during ART procedures. Engineered with German precision and manufactured under cleanroom conditions, V-DENUPET pipettes are among the most precise microtools available for manipulating and transferring oocytes and embryos.

    50 pipettes (5 vials of 10)

    • Oocyte and embryo denuding: 125 – 175 µm
    • Oocyte and embryo handling procedures: 200 - 600 µm
    • MEA and LAL tested
    • Gamma sterilized
    • Manufactured from high medical grade polymers
    • Flexible and easy to handle
    • Colour coded by size for easy identification
    Select options This product has multiple variants. The options may be chosen on the product page Details
    Add to wishlist
    Add to wishlist
  • The VitroMED V-DENUPET HANDLE is adjustable up to a volume of 3 µl for all denudation pipettes. The optional grip enables an easy handling for the daily laboratory routine.

    Single unit – 1 micropipettor

    • Smooth and responsive plunger making it ideal for daily lab routine
    • Ergonomic design
    • Fits Strip-ID micropipettes and most other popular plastic micropipettes (Æ9 mm OD)
    • Adjustable aspiration volume (min » 0.2 ml, max » 3 ml)
    • Total expulsion feature
    • Stainless steel table holder and spare parts kit with extra seals, plunger wire and hexagon key included
  • V–CARE SteriControl enables an easy control of the aseptic working environment and medium handling. The product enables an unmatched level of control over the sterile liquid handling processes used in ART. Use V–CARE SteriControl as an as indicator of workplace sterility or bioburden or to evaluate contamination of culture and handling media.

    20 ml bottle

    • Growth promotion tested
    • Sterility confirmed
    • Shelf life 12 months from date of production
    • 20 ml glass and PETG bottle
    Details
    Add to wishlist
    Add to wishlist
  • VitroMed's sperm collection cup is has a 100ml capacity with graduations up to 90ml. The cup features a blue screw-cap lid for secure sample storage.

    Case of 300 (packaged in individual soft blister packs)

    • 100ml cup volume
    • Individually packed to protect from scratches and contamination
    • Assessed for one cell mouse embryo assay (MEA ≥ 80 % blastocyst), endotoxin testing, and human sperm survival and motility testing (SMI ≥ 0.70)
    • Manufactured from USP Class 6 standard polymers (virgin polystyrene)
    • Cleanroom manufactured
  • Serological pipettes are laboratory tools used in various scientific applications to transfer precise volumes of liquid. VitroMed's pipettes are composed of virgin polystyrene with excellent optical properties and are available in 1ml, 5ml, and 10ml sizes. They feature colour coding for easy visual differentiation and clear printed graduations. All VitroMed plasticware is manufactured to exacting German standards of precision in cleanroom conditions and individually packaged to prevent scratches and contamination.

    Multipack – Case of 200 or 300 (packaged in individual soft blister packs)

    • Printed +/- graduations
    • Assessed for one cell mouse embryo assay (MEA ≥ 80 % blastocyst), endotoxin testing, and human sperm survival and motility testing (SMI ≥ 0.70)
    • Composed of virgin polystyrene with excellent optical properties (USP class 6)
    • Cleanroom manufactured
    Select options This product has multiple variants. The options may be chosen on the product page Details
    Add to wishlist
    Add to wishlist
  • VitroMed's multi-purpose 90mm dishes can be utilized for a range of applications including, but not limited to, cell culture, oocyte collection, and microscopy. All Vitromed dishes are manufactured to exacting German standards of precision in cleanroom conditions and are individually packaged to prevent scratches and contamination.

    Multipack – case of 300 (packaged in individual soft blister packs)

    • Individually packaged in soft blisters
    • Composed of clear virgin polystyrene with excellent optical properties
    • Assessed for one cell mouse embryo assay (MEA ≥ 80 % blastocyst), endotoxin testing, and human sperm survival and motility testing (SMI ≥ 0.70)
    • Cleanroom manufactured
  • VitroMed's versatile 60mm dishes are designed for various uses, such as cell culture, oocyte collection, and microscopy. Each Vitromed dish is produced under stringent German precision standards in cleanroom environments and comes individually packaged to protect against scratches and contamination.

    Multipack – case of 300 (packaged in individual soft blister packs)

    • Individually packaged in soft blisters
    • Composed of clear virgin polystyrene with excellent optical properties
    • Assessed for one cell mouse embryo assay (MEA ≥ 80 % blastocyst), endotoxin testing, and human sperm survival and motility testing (SMI ≥ 0.70)
    • Cleanroom manufactured
  • VitroMed's multi-purpose dishes are available in 35 mm, 60 mm, and 90 mm sizes. These dishes can be utilized for a range of applications including, but not limited to, cell culture, oocyte collection, and microscopy. All Vitromed dishes are manufactured to exacting German standards of precision in cleanroom conditions and are individually packaged to prevent scratches and contamination.

    Multipack – case of 300 (packaged in individual soft blister packs)

    • Individually packaged in soft blisters
    • Composed of clear virgin polystyrene with excellent optical properties
    • Assessed for one cell mouse embryo assay (MEA ≥ 80 % blastocyst), endotoxin testing, and human sperm survival and motility testing (SMI ≥ 0.70)
    • Cleanroom manufactured
  • VitroMed's 50 ml dishes are ideal for micro-manipulation procedures such as ICSI, sperm selection, and embryo biopsy. These dishes are composed of clear virgin polystyrene with excellent optical properties. All VitroMed dishes are manufactured to exacting German standards of precision in cleanroom conditions and are individually packaged to prevent contamination.

    Multipack – case of 300 (packaged in individual soft blister packs)

    • Individually packed to protect from scratches and contamination
    • Assessed for one cell mouse embryo assay (MEA ≥ 80 % blastocyst), endotoxin testing, and human sperm survival and motility testing (SMI ≥ 0.70)
    • Manufactured from USP Class 6 standard polymers (virgin polystyrene)
    • Cleanroom manufactured
  • VitroMed’s center-well dishes are multi-purpose dishes for use in fertilisation, cryo-procedures, embryo culture and embryo transfer. Each center-well dish features two outer compartments and a 360° grip to improve handling. These dishes are manufactured from virgin polystyrene wish excellent optical properties for superior microscopy. All VitroMed dishes are manufactured to exacting German standards of precision in cleanroom conditions and are individually packaged to prevent scratches and contamination.

    Multipack – case of 300 (packaged in individual soft blister packs)

    • Radiation sterilized
    • Multi-purpose, designed for a wide range of applications
    • Excellent optical properties
    • Every lot assessed for one cell mouse embryo assay (MEA > 80% blastocyst), endotoxin testing (LAL < 0.03 EU/mL) and human sperm survival and motility testing (SMI > 0.75)
    • Individually packaged to protect against scratches and contamination
    • Cleanroom manufactured
  • VitroMed's 5 ml multi-purpose rounded tube has a variety of uses in the laboratory. The dual position push-on cap enables venting and prevents sample loss and evaporation. All VitroMed plasticware is manufactured to exacting German standards of precision in cleanroom conditions and is individually packaged to prevent scratches and contamination.

    Multipack – Case of 500 (packaged in individual soft blister packs)

    • Printed graduations
    • Dual position snap-cap
    • Assessed for one cell mouse embryo assay (MEA ≥ 80 % blastocyst), endotoxin testing, and human sperm survival and motility testing (SMI ≥ 0.70)
    • Cleanroom manufactured
    • Individually packaged to protect against scratches and contamination
    • 5 ml volume tube, minimum volume measured at 0.5 ml
  • Vitromed’s 4-well dishes feature a cut-corner design and numbered corners to ensure proper orientation, improved handling, and to prevent errors during use. All VitroMed dishes are manufactured to exacting German standards of precision in cleanroom conditions and are individually packaged to prevent contamination.

    Multipack – case of 200 (packaged in individual soft blister packs)

    • Flat-bottomed dish
    • 1.8 mL volume
    • Excellent optical properties
    • Numbered corners
    • Assessed for one cell mouse embryo assay (MEA ≥ 80 % blastocyst), endotoxin testing, and human sperm survival and motility testing (SMI ≥ 0.70)
    • Individually packaged to protect against scratches and contamination
    • Cleanroom manufactured
    • Particle-free
  • VitroMed's cryovials are designed for cryopreservation and feature a flat bottom specially designed for use in cryogenic racks and trays. They feature a screwcap with a silicon ring to ensure a secure seal when closed.

    Case of 1000 (packaged in bags of 50)

    • 2ml capacity
    • Polypropylene tube designed to withstand temperatures as low as -196°C
    • Printed graduations and white label area
    • Assessed for one cell mouse embryo assay (MEA ≥ 80 % blastocyst), endotoxin testing, and human sperm survival and motility testing (SMI ≥ 0.70)
    • Manufactured from USP Class 6 standard polymers (virgin polystyrene)
    • Cleanroom manufactured
  • VitroMed's 15ml centrifuge tube has a conical bottom and printed graduations with a white area for labelling. A screw-on cap prevents leakage, and the tubes are composed of virgin polystyrene with excellent optical properties. All VitroMed plasticware is manufactured to exacting German standards of precision in cleanroom conditions and these tubes are individually packaged to prevent scratches and contamination.

    Multipack – Case of 500 (packaged in individual soft blister packs)

    • Twist-cap technology
    • Easy peel-open breathable packaging eliminates the need for off gassing prior to use
    • Assessed for one cell mouse embryo assay (MEA ≥ 80 % blastocyst), endotoxin testing, and human sperm survival and motility testing (SMI ≥ 0.70)
    • Individually packaged to protect against scratches and contamination
    • Cleanroom manufactured
    • Particle-free
  • VitroMed’s 14 ml rounded tube has a dual position push-on cap to enable venting and to prevent sample loss and evaporation. All VitroMed plasticware is manufactured to exacting German standards of precision in cleanroom conditions and individually packaged to prevent scratches and contamination.

    Multipack – Case of 500 (packaged in individual soft blister packs)

    • Printed graduations
    • Dual position snap-cap
    • Assessed for one cell mouse embryo assay (MEA ≥ 80 % blastocyst), endotoxin testing, and human sperm survival and motility testing (SMI ≥ 0.70)
    • Composed of virgin polystyrene with excellent optical properties (USP class 6)
    • Cleanroom manufactured
  • The VitaVitro Well of the Well (WOW) Culture Dish offers an advanced solution for the cultivation of embryos from fertilization to the blastocyst stage. It's specifically designed to mimic a three-dimensional in vitro environment for embryos, maximizing their development potential. The dish features conical microwells that simulate conditions in the oviduct, providing an optimal microenvironment for embryo growth. The microwells' unique inverted sugar-loaf shape facilitates dilution of waste materials while enhancing the concentration of crucial autocrine and paracrine factors. Additionally, the dish includes flat-bottom microwells for individual microscopic evaluation or Time-Lapse follow-up. Two extra wells are incorporated for embryo holding or washing before transfer or cryopreservation. The dish is crafted with a jagged-edge design to ensure secure handling and minimize the risk of accidental drops or spillages. VitaVitro's WOW Culture Dish is highly adaptable, offering flexible workflows that cater to the unique requirements of individual patients, embryos, and clinical staff members. This innovative design has been demonstrated to improve the likelihood of embryo development to the blastocyst stage by day six, contributing to the success of IVF procedures.

    Multipack (pack of 5)

    • Advanced Design: Offers a 3D in vitro environment for embryo development.
    • Optimized Microenvironment: Conical microwells mimic oviduct conditions, enhancing necessary factors for development.
    • Time-Lapse Support & Secure Handling: Supports individual microscopic evaluation and Time-Lapse follow-up. Jagged-edge design ensures safe handling.
    • Flexible Workflows: Extra wells for embryo holding/washing and varying microwell configurations cater to different needs.
    Details
    Add to wishlist
    Add to wishlist
  • The VitaVitro Cooling Box is a specialized liquid nitrogen container designed for the secure fixing and transfer of storage containers during the vitrification or warming of gametes or embryos. Recommended for use in conjunction with the VitaVitro Straw Set, this cooling box prioritizes safety and portability. The tank can be sterilized prior to use, aiding in the reduction of potential contamination. The cooling box's durable, compact design and well-structured box includes a shelf specifically for straws, ensuring optimal cryogenic properties. Additionally, the cover plate is designed to effectively minimize the volatilization of liquid nitrogen. For added convenience, the shelf can be adjusted to meet individual usage requirements.

    Single unit

    • Safety & Portability: Designed for secure handling and ease of transport during the vitrification or warming of gametes or embryos.
    • Liquid Nitrogen-Saving: The box's design, complete with a cover plate, effectively slows the volatilization of liquid nitrogen.
    • Adjustable Shelf: Includes a straw shelf that can be adjusted to meet individual usage requirements.
    Details
    Add to wishlist
    Add to wishlist
  • The Sperm Swimming Up Trapper Kit is designed to select high-quality sperm, enhancing success rates for both Intrauterine Insemination (IUI) and In Vitro Fertilization (IVF) procedures. The kit comprises two primary components: a Swimming Sperm Trapper and a 45° Sperm Swimming Up Rack. Designed with a cylindrical main body, the Swimming Sperm Trapper has an open upper end and a conical convex bottom. The bottom's conical feature is equipped with a central hole, purposefully designed to allow sperm to swim upward. In operation, sperm are initially transferred into the Swimming Sperm Trapper. When necessary, culture medium is added to the designated component, where it flows into the sperm cavity. The trapper is then positioned in the 45° Sperm Swimming Up Rack, allowing sperm to navigate towards the culture medium. This process facilitates the selection of high-motility sperm, resulting in an enriched sample ideal for IUI or IVF applications.

    Individually Wrapped

    • Centrifuge free; simple and easy to use
    • Natural screening of high-quality sperm
    • MEA Tested, Sterility Tested, Endotoxin Tested
    Select options This product has multiple variants. The options may be chosen on the product page Details
    Add to wishlist
    Add to wishlist
  • The Vitrification and Warming Plate is a versatile tool designed to facilitate vitrification cooling and warming procedures in a single dish, streamlining the vitrification and thawing processes. The product features a rectangular shape with six orderly arranged wells on its surface. These wells accommodate vitrification or thawing media. The leftmost well, known as the TS well, is larger than the others and is specifically used to place TS medium. The remaining wells serve as reservoirs for drops of ES, VS, DS, or WS mediums. In operation, oocytes or embryos are placed in these wells, adhering to the instructions provided with the Vitrification Kit or Vitrification Thawing Kit. This layout ensures organized, efficient procedures, providing an integrated solution for vitrification freezing and thawing processes in assisted reproductive technology applications.

    Individually wrapped

    • Dual-purpose plate for both vitrification and thawing
    • Deep wells to avoid evaporation of fluids
    • Device Loading area on the plate
    • Easy to use
    • Sterilized by Gamma ray, MEA tested, and Endotoxin tested
Go to Top